bedliners for 73-87 swb discontinued?

[bigarmzz]

i went to the local 4x4 parts dealer around here to buy a bedliner (under the rail) for my 86 swb, he called me a day later and said that they arent making them anymore?

so i called summit, they said basically the same thing

what the he**?

anyone else run into this problem?

is there anywhere to buy one on the web? (shipping would prob be nuts )

[72freak]

They show up used regularly on craigs list and ebay and the trader.

I would call your local Leer truck shop to confirm. If they say they are discontinued, I would believe it!!!

[magnethead]

1 word: rhino

[bigarmzz]

Originally Posted by magnethead

1 word: rhino

well, it comes down to personal preference....

.i just cant stand to sand a spray the bedliner on super nice GM sheet metal, i'd rather just throw in a bedliner, and not touch the sheet metal

[boatpuller]

yup,ran into that problem,finally found one.he said they wanted 200 something for it.i told him" i'm not paying 200 for 5 bucks worth of plastic".he said.."well you ain't getting no bedliner"..most of the used ones i found looked.well...used.so i bit the bullet and went spray in.local chevy dealer was running a 359 special,you can't tell it from linex and warranted forever.best of all it looks great.

[pcmcobra]

I have one in my truck right now, under the rails, plastic.
drive over, take it out and it's yours...

[magnethead]

Originally Posted by bigarmzz

well, it comes down to personal preference....

.i just cant stand to sand a spray the bedliner on super nice GM sheet metal, i'd rather just throw in a bedliner, and not touch the sheet metal

use a drop in, and after a while, it won't be nice GM sheet metal....

It'll look more like my bed was before we did some work to it.

[ain't_done_yet]

I agree w/magnethead...once that bedliner starts rubbin' on that paint and goes thru it, rustin' will begin. We've gotta guy here in Sulphur Springs that sprays the Line-X...it looks awsome and everyone I've know that used him said they love it.

[N2TRUX]

Have you considered a bed mat? I didn't think a spray in ;iner would fit the look of my 77 so I put a rubber bed mat in it. It does take the shine off the paint, but it won't rub through the paint like a drop in liner.

If it weren't for being concerned with the retro look I would go spray in...

[kevinr1970]

But how does it lead to rust?
I had a bedliner put in my '06 short bed just after I bought it. Seems that since it is under the rail that water would be less likely to get to it than with out it. Since there isn't pine needles and dirt and crap to plug the drain holes it should drain out before it is able to cause damage?

I like the look of of spray in but never thought it offered much protection to the metal. It keeps a bed that gets beat up looking good or makes a beat up bed look good but it doesn't protect it from getting dented.

Originally Posted by ain't_done_yet

I agree w/magnethead...once that bedliner starts rubbin' on that paint and goes thru it, rustin' will begin. We've gotta guy here in Sulphur Springs that sprays the Line-X...it looks awsome and everyone I've know that used him said they love it.

[edman87]

Condensation.
Pull a liner out of a truck that has been there several years and what you see will turn you against them forever.

[KShortell]

I had a drop in liner in my old '95 Chevy (company truck). Every once in a while, the rear view mirror would go black and I'd look back to see the bed liner being sucked up out of the bed. At least a couple of the anchors were still holding!

If it were me, I'd go with a spray-in liner or, if I had a cap, a bed mat or carpet kit. The drop ins will move with bed flex as you go down the road. True, it won't move much, but that 1/32" or so back and forth will add up over time. I've seen it.

Good luck!

Kevin

[piecesparts]

The hard plastic trash can bedliners are tough, there is no doubt about that, BUT the bed does get rubbed raw and the moisture does cause rust underneath it. I went to a spray in liner on all of my trucks and there is no despair here. I like them, maybe you will too.

[magnethead]

Also, something that the spray-in's have now, is colored dye. You have a yellow truck, they can put yellow dye in the bedliner chemical so you have a yellow spray in liner, and from far away, you can't really tell it's a spray in.

[72freak]

Originally Posted by magnethead

1 word: rhino

NEVER!!!!!!!!!!!!!!!!!!!!!!!

[72freak]

Originally Posted by edman87

Condensation.
Pull a liner out of a truck that has been there several years and what you see will turn you against them forever.

That really depends on you location, bed condition before instalation and amount of leakage. There will be the same amount of good stories as bad stories about them. Each case will be different. I have pilled them out of trucks and the bed looked bad and I have pulled them out of trucks and the bed look new.

Example.........we drug home a 1 owner beat to hell 1974 C-10 4x4 last week. Original owner put the bed liner in it 20+ years ago. It was always stored outside and had NEVER been removed. When we puilled it out.....the bed looked brand new!!!! NO RUST....paint looked new.

On the other hand I have pulled them out and there would be rust.

[piecesparts]

Originally Posted by 72freak

NEVER!!!!!!!!!!!!!!!!!!!!!!!

REALLY!!! Why??????

[72freak]

Originally Posted by piecesparts

REALLY!!! Why??????

My opinion and experience only!!!!

They DO NOT protect against dents..like they claim.
Way over priced.
I dont like the way they look after some age. Chalky

This is for a classic of course. Now if you have some old junker or a work truck......if you want to spend twice the money for a spray in instead of a bed liner.....go ahead.

[piecesparts]

There are other brands (Line-X and others) that say they don't fade. However if you are going to beat the H--l out of it, then who cares if it fades. Want a bed that doesn't dent, then buy a steel flat bed.

[72freak]

Originally Posted by piecesparts

Want a bed that doesn't dent, then buy a steel flat bed.

Or........put a bedliner in it!!!!!!!!!!!

[bigarmzz]

these are the same reasons i have

Originally Posted by 72freak

My opinion and experience only!!!!

They DO NOT protect against dents..like they claim.
Way over priced.
I dont like the way they look after some age. Chalky

This is for a classic of course. Now if you have some old junker or a work truck......if you want to spend twice the money for a spray in instead of a bed liner.....go ahead.

[bigarmzz]

Originally Posted by pcmcobra

I have one in my truck right now, under the rails, plastic.
drive over, take it out and it's yours...

man, i you werent all the way in florida, believe me, i'd take ya up on your offer

[ain't_done_yet]

It doesn't matter what you have in your truck bed....you throw something in there hard and heavy enough, it's gonna dent it. I bought a Dodge dually from a friend of mine with 240K miles on it. They carried large drill heads that weighted ALOT in the back. That drop in liner might as well not have even been in there.

[67Cowboy]

Originally Posted by bigarmzz

i went to the local 4x4 parts dealer around here to buy a bedliner (under the rail) for my 86 swb, he called me a day later and said that they arent making them anymore?

so i called summit, they said basically the same thing

what the he**?

anyone else run into this problem?

is there anywhere to buy one on the web? (shipping would prob be nuts )

I have an under the rail with heavy duty ribs that I wouldn't take for simply because it is the reason I don't have a dented/beat-up bed, no matter how many motors and transmissions I haul. But as soon as I get the cash i'm going to put the spray on under it and inside the cab up about 8 inches, because like everybody said they do rub the paint off and if the pop in is dirty I will be able to slide it out and go somewhere with a clean truck.
The other day I was doing searches on crazedlist and found a guy on craigslist that had a whole stack of brand new ones the only reason I didn't get an extra was because all the ones he had were for short bed !!!

[HotRod C/10]

I been looking for a used one in Albuquerque for a minute!