pretty nice 67 stepside bed for sale in Dallas...lots of pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superchevy · 11-30-2003, 11:17 PM

Selling my 67 stepside bed. Has very light surface rust. You could just sand it down and paint it as is. Pass side fender has been repaired in rear, but looks fine as is. Driver's side fender is near mint, with no cut-out for spare. Step plates are very, very nice. A couple of very minor dings in the bedsides, but nothing major. Top rails are very nice. Front bed panel is perfect. Original "CHEVROLET" tailgate is very nice as well. The wood floor is shot, and missing a few hold down strips, but overall, a pretty straight, rust-free bed.
$400 and you come pick it up.
If no takers on the bed, I will consider parting out, and could ship the fenders, steps, gate, or bedsides pretty cheap by Greyhound.
You can PM me or email me directly at carpediem_00@yahoo.com

superchevy · 11-30-2003, 11:18 PM

2

superchevy · 11-30-2003, 11:18 PM

3

superchevy · 11-30-2003, 11:19 PM

4

superchevy · 11-30-2003, 11:20 PM

5

superchevy · 11-30-2003, 11:21 PM

6

72shadetree · 12-01-2003, 12:19 AM

sent pm

**1971Stepside** · 12-01-2003, 12:45 AM

sent pm

superchevy · 12-01-2003, 04:49 AM

Reply to 71stepside and 72shadetree:
Thanks for the inquiries on the bed parts.
I want to see if I can sell it complete, though.
I'll keep ya posted.
SC

**1971Stepside** · 12-01-2003, 05:24 PM

superchevy,

I may have found a way to pick this bed up. Please let me know how straight the bedsides are. What I mean is if you held a straight edge on them from the bed floor up (vertical) are they straight? Most of them are concave from people stuffing oversized items in them over the years. If they are staight we may be able to work out something.

superchevy · 12-01-2003, 11:00 PM

1971Stepside,
They're pretty damn straight.
I'll check them with a straightedge tomorrow and let you know.
SC

**1971Stepside** · 12-02-2003, 01:19 AM

Thanks. Just to give you a little background, I bought a bed from a fellow in Colorado that was rust free and near perfect. When it got here I could not use anything off of it!! So, I'm just being a little gun shy, forgive me. It isn't personal.

I am trying to build a cream puff of a truck so let me know if something can't be or isn't of that quality. For instance, the straightness of the bedsides and the tailgate condition. I can do minor work no problem. I'll shut up now....thanks for checking this out for me.

smonty · 12-02-2003, 01:44 AM

I'll take the bed if you toss in that old frame it is sitting on!

Ernie
LOL

SCOTI · 12-02-2003, 01:44 AM

FWIW, I've lined SC's pockets w/a couple of bucks

.... he was pretty accurate w/his descriptions on everything I've purchased.

TEXAS 68 · 12-02-2003, 10:09 AM

I"m interested in the also but won't be in dallas area until Jan.

spencra · 12-02-2003, 11:03 AM

Awww man, I need a bed desparately but all the good stuff is out west or south.

Disadvantages of living in the rust belt. Not to mention all that damn winter salt.

**1971Stepside** · 12-02-2003, 02:25 PM

Thanks Scoti. That helps to hear from others.

Waiting to hear from superchevy

Suicide-D · 12-02-2003, 04:22 PM

I want to get in line for the steps. If you decide to part it. Some dumb@ss sold mine... oh I mean I sold mine and then changed my mind and decided to build it with a stepside...

11-30-2003, 11:17 PM	#1
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	pretty nice 67 stepside bed for sale in Dallas...lots of pics Selling my 67 stepside bed. Has very light surface rust. You could just sand it down and paint it as is. Pass side fender has been repaired in rear, but looks fine as is. Driver's side fender is near mint, with no cut-out for spare. Step plates are very, very nice. A couple of very minor dings in the bedsides, but nothing major. Top rails are very nice. Front bed panel is perfect. Original "CHEVROLET" tailgate is very nice as well. The wood floor is shot, and missing a few hold down strips, but overall, a pretty straight, rust-free bed. $400 and you come pick it up. If no takers on the bed, I will consider parting out, and could ship the fenders, steps, gate, or bedsides pretty cheap by Greyhound. You can PM me or email me directly at carpediem_00@yahoo.com Attached Images

11-30-2003, 11:18 PM	#2
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	2 Attached Images

11-30-2003, 11:18 PM	#3
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	3 Attached Images

11-30-2003, 11:19 PM	#4
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	4 Attached Images

11-30-2003, 11:20 PM	#5
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	5 Attached Images

11-30-2003, 11:21 PM	#6
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	6 Attached Images

12-01-2003, 12:19 AM	#7
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	sent pm __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

12-01-2003, 12:45 AM	#8
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	sent pm __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

12-01-2003, 04:49 AM	#9
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Reply to 71stepside and 72shadetree: Thanks for the inquiries on the bed parts. I want to see if I can sell it complete, though. I'll keep ya posted. SC

12-01-2003, 05:24 PM	#10
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	superchevy, I may have found a way to pick this bed up. Please let me know how straight the bedsides are. What I mean is if you held a straight edge on them from the bed floor up (vertical) are they straight? Most of them are concave from people stuffing oversized items in them over the years. If they are staight we may be able to work out something. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

12-01-2003, 11:00 PM	#11
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	1971Stepside, They're pretty damn straight. I'll check them with a straightedge tomorrow and let you know. SC

12-02-2003, 01:19 AM	#12
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Thanks. Just to give you a little background, I bought a bed from a fellow in Colorado that was rust free and near perfect. When it got here I could not use anything off of it!! So, I'm just being a little gun shy, forgive me. It isn't personal. I am trying to build a cream puff of a truck so let me know if something can't be or isn't of that quality. For instance, the straightness of the bedsides and the tailgate condition. I can do minor work no problem. I'll shut up now....thanks for checking this out for me. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

12-02-2003, 01:44 AM	#13
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply I'll take the bed if you toss in that old frame it is sitting on! Ernie LOL __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

12-02-2003, 01:44 AM	#14
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,910	FWIW, I've lined SC's pockets w/a couple of bucks .... he was pretty accurate w/his descriptions on everything I've purchased. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-02-2003, 10:09 AM	#15
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	I"m interested in the also but won't be in dallas area until Jan. __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.



Register or Log In To remove these advertisements.

12-02-2003, 11:03 AM	#16
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Awww man, I need a bed desparately but all the good stuff is out west or south. Disadvantages of living in the rust belt. Not to mention all that damn winter salt.

12-02-2003, 02:25 PM	#17
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,928	Thanks Scoti. That helps to hear from others. Waiting to hear from superchevy __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

12-02-2003, 04:22 PM	#18
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	I want to get in line for the steps. If you decide to part it. Some dumb@ss sold mine... oh I mean I sold mine and then changed my mind and decided to build it with a stepside...

Register or Log In To remove these advertisements.