how to remove broken 4x4 actuator - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pphil · 02-15-2017, 06:21 PM

i was trying to change the 4x4 actuator and well it broke off flush in the hole.....

now how do i remove the actuator ?????

any help will be appreciated

truck is a 94 gmc 2500 4x4

thanks scott

rickpilgrim · 02-21-2017, 12:19 AM

That happened on our S10 and what we did was to take a 1/8" drill bit and drill into the broken off end on each side to hellp collapse it and we used a thin hooked snap on brand pick and pulled the broken ends out.

02-15-2017, 06:21 PM	#1
pphil Registered User Join Date: Jun 2014 Location: nashville tn Posts: 16	how to remove broken 4x4 actuator i was trying to change the 4x4 actuator and well it broke off flush in the hole..... now how do i remove the actuator ????? any help will be appreciated truck is a 94 gmc 2500 4x4 thanks scott __________________ 1994 GMC 2500 4x4 extended cab long bed 5.7 5 speed 1970 wildcat 455-4

02-21-2017, 12:19 AM	#2
rickpilgrim Registered User Join Date: Apr 2011 Location: Wausau, WI Posts: 591	Re: how to remove broken 4x4 actuator That happened on our S10 and what we did was to take a 1/8" drill bit and drill into the broken off end on each side to hellp collapse it and we used a thin hooked snap on brand pick and pulled the broken ends out.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.