The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-21-2020, 09:42 PM   #1
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,390
Getting my big block Longhorn running again

Having some small issues, truck been sitting for just about 6 years now. Got new batteries in it and the oil pressure up. I pulled out the 396 years ago and put in a TBI 454, and as a result am running a frame rail pump. Needs to be changed, but before I was just using the NAPA pump rated at 15psi (I think). Brand name quality pumps available??? Still have to clean out the tank and get better fuel in it and the injectors seem to be gummed up also. The new fuels really suck.

So recommendations on a pump and where to get quality fuel injectors, been through all the ads on the internet with Ebay and amazon. Never actually taken a TBI injector apart--is that possible so I can clean them out??
kwmech is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:07 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com