Need measurement for accessories please? Between fenders and frame rails please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

uhcoog1 · 07-06-2018, 10:22 PM

I need a couple measurements please. Truck is apart at the painters.

For those with an LS swap- what is the distance between the frame rails at the front edge of the accessories? And the same on the fenders please around 3-3.5" above the midpoint on the crank (in below pic- where the PS reservoir sits).

Trying to determine if the gen 5 accessory drive from Holley will fit. See below. Any help appreciated!

Thanks guys

_Ogre · 07-06-2018, 11:16 PM

year of truck might get you some answers

Fred T · 07-07-2018, 05:33 AM

In another thread he asks about a 48 3100.

mr48chev · 07-07-2018, 12:30 PM

This gives the outside measurements in some spots in the area of question. http://s173.photobucket.com/user/mr4...tml?sort=4&o=3

You would have to subtract the width of the frame rails.

I have several images of the frame drawings in that album.

uhcoog1 · 07-07-2018, 05:14 PM

Quote:

Originally Posted by _Ogre

year of truck might get you some answers

Apologies. Yes, 1948.

Quote:

Originally Posted by mr48chev

This gives the outside measurements in some spots in the area of question. http://s173.photobucket.com/user/mr4...tml?sort=4&o=3

You would have to subtract the width of the frame rails.

I have several images of the frame drawings in that album.

This is quite helpful. Thank you!

mr48chev · 07-09-2018, 10:45 AM

Old photo that I had in my album but you can get real close on the between the rails measurement with it with a bit of math. I'm going to be lazy and just post the link to the photobucket photo that you will have to open. http://s173.photobucket.com/user/mr4...l?sort=3&o=103

07-06-2018, 10:22 PM	#1
uhcoog1 Registered User Join Date: May 2017 Location: Houston Tx Posts: 5	Need measurement for accessories please? Between fenders and frame rails please I need a couple measurements please. Truck is apart at the painters. For those with an LS swap- what is the distance between the frame rails at the front edge of the accessories? And the same on the fenders please around 3-3.5" above the midpoint on the crank (in below pic- where the PS reservoir sits). Trying to determine if the gen 5 accessory drive from Holley will fit. See below. Any help appreciated! Thanks guys

07-06-2018, 11:16 PM	#2
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,663	Re: Need measurement for accessories please? Between fenders and frame rails please year of truck might get you some answers __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

07-07-2018, 05:33 AM	#3
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Need measurement for accessories please? Between fenders and frame rails please In another thread he asks about a 48 3100. __________________ Fred There is no such thing as too much cam...just not enough engine.

07-07-2018, 12:30 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,267	Re: Need measurement for accessories please? Between fenders and frame rails please This gives the outside measurements in some spots in the area of question. http://s173.photobucket.com/user/mr4...tml?sort=4&o=3 You would have to subtract the width of the frame rails. I have several images of the frame drawings in that album. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

07-09-2018, 10:45 AM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,267	Re: Need measurement for accessories please? Between fenders and frame rails please Old photo that I had in my album but you can get real close on the between the rails measurement with it with a bit of math. I'm going to be lazy and just post the link to the photobucket photo that you will have to open. http://s173.photobucket.com/user/mr4...l?sort=3&o=103 __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.