Pops 72 cheyenne dropmember build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**superflysteiny** · 01-24-2011, 02:49 PM

Here it goes guys my third build in 2 years on this forum. Hope you guys like this truck. So here was the thought process. Find a super clean 72 cheyenne with nice paint. Color did not matter and build a daily driver that laid frame on 22 front and rear. Truck will have full trim upper and lower with stock gas tank. 420hp small block chevy, smooth firewall, drop member front and rear with 5 gallon air pod and 2 compressor. Willwood discs front and rear with polished calipers. Full red leather interior. Custom sheet metal bed and inner front fenders. The front fenders will be just like my other truck I built but it will be smooth from the back of the grill to the fire wall. We plan to drive the hell out of this truck. Hope you guys enjoy the build. Thanks Eric

**superflysteiny** · 01-24-2011, 02:52 PM

Here is what has been finished new classic bulletspecialties steering wheel, marques side marker lights and trim on upper only I will get you gut pics today of the upper trim.

**superflysteiny** · 01-24-2011, 03:01 PM

Last picture is of the stock turn signals. I will get you guys more pics tonight. Here the wheels we are running. 22 by 8.5 fronts and 22 by 10 rear with least amount of back space.

VA72C10 · 01-24-2011, 04:16 PM

Nice! Was looking forward to this build since I saw it on your other thread!

**67cheby** · 01-24-2011, 04:18 PM

WWOOOOO HOOOOOOO here we go again !!!

**Glorybound13** · 01-24-2011, 05:00 PM

Excited already!

69CST-V · 01-24-2011, 05:43 PM

Where do you find the time. I'm in.

lowdownstar · 01-24-2011, 06:15 PM

well you couldn't ask for a better truck to start with, and then add in Nathan porters stuff and some cool wheels sounds to me like you have a winner in the making!!!!

Ray

**superflysteiny** · 01-24-2011, 06:25 PM

Quote:

Originally Posted by Glorybound13

Excited already!

Glad you guys are excited I am too. Just been ordering parts for the last two months and then I will blow this project out. Its nice not having to do a bunch a paint and body. I have to redo the front right fender on the bottom but that is really simple. As far as my time goes I work on the truck after the kids go to be. I may spend 2 or 3 hrs a night in the garage. I try to focus on one thing at a time. So I will get you more pics tonight. Thanks Eric

**superflysteiny** · 01-24-2011, 06:26 PM

Quote:

Originally Posted by lowdownstar

well you couldn't ask for a better truck to start with, and then add in Nathan porters stuff and some cool wheels sounds to me like you have a winner in the making!!!!

Ray

I hope so Ray

jbclassix · 01-24-2011, 06:35 PM

Awesome! I was looking forward to this build!

**lolife99** · 01-24-2011, 06:58 PM

Great Project.
I'll definitely be watching this one.

Wanna sell the old steering wheel you took off?

**superflysteiny** · 01-24-2011, 06:59 PM

Great I will keep you guys posted every week.

c10seconds · 01-24-2011, 07:59 PM

Looking forward to seeing how this turns out.
Posted via Mobile Device

butternut1972 · 01-24-2011, 08:10 PM

Cool! Subscribed. I dig all of your builds.

PBFAB.COM · 01-24-2011, 08:12 PM

I'm in.

greystoke · 01-24-2011, 08:20 PM

I'll jump in the pool to

68 Quad C10 · 01-24-2011, 08:22 PM

I am in........ love new builds

1stchevy · 01-24-2011, 10:11 PM

I'm definitely in for this one.

bigguy69 · 01-25-2011, 10:18 AM

Me too im in!!!

**superflysteiny** · 01-25-2011, 02:12 PM

Thanks guys should be good. So talked to Nate couple days ago and drop member is on its way. So like I stated in a previous post hood and inner fenders came out when I put the upper trim on. So here are some pics of the trim on the side of the truck along with the new marker lights. Paint condition on the outside is an 8 out of 10. On the inside 5 out of 10 because it was not wet sanded and buffed so there is some runs and orange peel, I will be doing that this weekend. Also my standards on paint are really high do to the fact that I like show paint which as you all no takes alot more work to get. Again with this truck I am really having to control myself from building an all out show truck. I am trying to keep in mind that it is a driver. I plan to shoot out to az for the goodguys shows and this is the truck we are taking.

**superflysteiny** · 01-25-2011, 02:13 PM

PBFAB.COM · 01-25-2011, 02:30 PM

9 big boxes.... scheduled to arrive tomorrow.

Might want to get some water handy to help re-hydrate your UPS driver!

smokinstang70 · 01-25-2011, 03:09 PM

Great looking truck... good starting point... great direction... can't wait to see more of the build

Where did you get the upper side trim? I have ordered some in the past and was very disappointed in the quality. Yours looks great.

Also... where did the side marker lights come from? They are awesome!!!

Raguemoe · 01-25-2011, 03:46 PM

You may as well just tear it apart now & get a head start, cuz you know you will end up doing it later! After you remove the bed & front clip for the DM stuff your already half way there. Haha just messing with you, don't listen to the voices in your head or you will have another full blown project on your hands! What's the saying "keep it simple stupid", but if that was the case we wouldn't be on this forum for hrs every day. Have fun & good luck!
Posted via Mobile Device

01-24-2011, 02:49 PM	#1
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Pops 72 cheyenne dropmember build Here it goes guys my third build in 2 years on this forum. Hope you guys like this truck. So here was the thought process. Find a super clean 72 cheyenne with nice paint. Color did not matter and build a daily driver that laid frame on 22 front and rear. Truck will have full trim upper and lower with stock gas tank. 420hp small block chevy, smooth firewall, drop member front and rear with 5 gallon air pod and 2 compressor. Willwood discs front and rear with polished calipers. Full red leather interior. Custom sheet metal bed and inner front fenders. The front fenders will be just like my other truck I built but it will be smooth from the back of the grill to the fire wall. We plan to drive the hell out of this truck. Hope you guys enjoy the build. Thanks Eric __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-24-2011, 02:52 PM	#2
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Here is what has been finished new classic bulletspecialties steering wheel, marques side marker lights and trim on upper only I will get you gut pics today of the upper trim. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-24-2011, 03:01 PM	#3
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Last picture is of the stock turn signals. I will get you guys more pics tonight. Here the wheels we are running. 22 by 8.5 fronts and 22 by 10 rear with least amount of back space. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell Last edited by superflysteiny; 01-24-2011 at 03:09 PM.

01-24-2011, 04:16 PM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Pops 72 cheyenne dropmember build Nice! Was looking forward to this build since I saw it on your other thread! __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-24-2011, 04:18 PM	#5
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build WWOOOOO HOOOOOOO here we go again !!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-24-2011, 05:00 PM	#6
Glorybound13 Junior Member Join Date: Dec 2010 Location: Dallas, NC Posts: 70	Re: Pops 72 cheyenne dropmember build Excited already!

01-24-2011, 05:43 PM	#7
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Pops 72 cheyenne dropmember build Where do you find the time. I'm in. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

01-24-2011, 06:15 PM	#8
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 820	Re: Pops 72 cheyenne dropmember build well you couldn't ask for a better truck to start with, and then add in Nathan porters stuff and some cool wheels sounds to me like you have a winner in the making!!!! Ray

01-24-2011, 06:35 PM	#11
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Pops 72 cheyenne dropmember build Awesome! I was looking forward to this build! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

01-24-2011, 06:58 PM	#12
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: Pops 72 cheyenne dropmember build Great Project. I'll definitely be watching this one. Wanna sell the old steering wheel you took off? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-24-2011, 06:59 PM	#13
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Great I will keep you guys posted every week. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-24-2011, 07:59 PM	#14
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Pops 72 cheyenne dropmember build Looking forward to seeing how this turns out. Posted via Mobile Device

01-24-2011, 08:10 PM	#15
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Pops 72 cheyenne dropmember build Cool! Subscribed. I dig all of your builds.

01-24-2011, 08:12 PM	#16
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Pops 72 cheyenne dropmember build I'm in. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-24-2011, 08:20 PM	#17
greystoke Registered User Join Date: Jul 2008 Location: Buckeye, Arizona Posts: 694	Re: Pops 72 cheyenne dropmember build I'll jump in the pool to __________________ "Fear makes the wolf look bigger" http://67-72chevytrucks.com/vboard/s...d.php?t=305629



Register or Log In To remove these advertisements.

01-24-2011, 08:22 PM	#18
68 Quad C10 Registered User Join Date: Jul 2009 Location: Idaho Falls Posts: 324	Re: Pops 72 cheyenne dropmember build I am in........ love new builds __________________ http://www.tandscustomcars.com/ My Quad Cab build:http://67-72chevytrucks.com/vboard/s...d.php?t=352342 IT"S GOT A ROOF NOW WHOO HOO!!!! 65 GTO Build (If you wanna check it out) http://67-72chevytrucks.com/vboard/s...40#post4503040

01-24-2011, 10:11 PM	#19
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Pops 72 cheyenne dropmember build I'm definitely in for this one.

01-25-2011, 10:18 AM	#20
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Pops 72 cheyenne dropmember build Me too im in!!! __________________ members met: redbaron69, billsbowtie,nc67

01-25-2011, 02:12 PM	#21
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Thanks guys should be good. So talked to Nate couple days ago and drop member is on its way. So like I stated in a previous post hood and inner fenders came out when I put the upper trim on. So here are some pics of the trim on the side of the truck along with the new marker lights. Paint condition on the outside is an 8 out of 10. On the inside 5 out of 10 because it was not wet sanded and buffed so there is some runs and orange peel, I will be doing that this weekend. Also my standards on paint are really high do to the fact that I like show paint which as you all no takes alot more work to get. Again with this truck I am really having to control myself from building an all out show truck. I am trying to keep in mind that it is a driver. I plan to shoot out to az for the goodguys shows and this is the truck we are taking. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-25-2011, 02:13 PM	#22
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-25-2011, 02:30 PM	#23
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Pops 72 cheyenne dropmember build 9 big boxes.... scheduled to arrive tomorrow. Might want to get some water handy to help re-hydrate your UPS driver! __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-25-2011, 03:09 PM	#24
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Pops 72 cheyenne dropmember build Great looking truck... good starting point... great direction... can't wait to see more of the build Where did you get the upper side trim? I have ordered some in the past and was very disappointed in the quality. Yours looks great. Also... where did the side marker lights come from? They are awesome!!!

01-25-2011, 03:46 PM	#25
Raguemoe Junior Member Join Date: Jan 2007 Location: Highland CA Posts: 742	Re: Pops 72 cheyenne dropmember build You may as well just tear it apart now & get a head start, cuz you know you will end up doing it later! After you remove the bed & front clip for the DM stuff your already half way there. Haha just messing with you, don't listen to the voices in your head or you will have another full blown project on your hands! What's the saying "keep it simple stupid", but if that was the case we wouldn't be on this forum for hrs every day. Have fun & good luck! Posted via Mobile Device Last edited by Raguemoe; 01-25-2011 at 03:48 PM.

Register or Log In To remove these advertisements.