|
04-30-2018, 10:44 AM
|
#1 |
|
Registered User
Join Date: Apr 2018
Location: NW, Oregon
Posts: 51
|
Flip kit for 69 C20
Just picked up a C20 and plan on lowering it.
I keep reading about the flip kit but don't see many options for a 69. I see a few comments that the 73+ kits will work but no pics. Has anybody put a 73+ kit on a 69? I can't seem to figure out what the difference would be. |
|
|
|
04-30-2018, 08:14 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,709
|
Re: Flip kit for 69 C20
DJM makes a kit for the 67-72. I have one on my C10. 3" axle tubes and 2 1/4" springs are on both C10 and C20 so should work.
If you have a Longhorn, they have 2 1/2" wide springs so the 73+ kit would be the way to go.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
04-30-2018, 09:09 PM
|
#3 |
|
Registered User
Join Date: Apr 2018
Location: NW, Oregon
Posts: 51
|
Re: Flip kit for 69 C20
I emailed DJM and they said no kit for the C20 anymore.
I do have the 2.25 springs though so maybe a C10 would work. The only C20 kits I have found come with the C notch bracket. It will never have anything in the bed so I wanted to go without the notch for now. The axle looks like 3" to me and it is the 10 bolt. |
|
|
|
|
05-01-2018, 08:27 AM
|
#4 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,709
|
Re: Flip kit for 69 C20
If you are comfortable welding and fab, you can make new mounts with 2.25” x 1/4” wall square tube and weld onto your housing. Flip it and reuse stock hardware.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
05-01-2018, 10:20 AM
|
#5 |
|
Registered User
Join Date: Apr 2018
Location: NW, Oregon
Posts: 51
|
Re: Flip kit for 69 C20
I'm on the fence about my welding. Not sure I would trust it on an axle but I may go that route if I can't fine a decent kit.
|
|
|
|
|
05-16-2018, 07:57 PM
|
#6 |
|
Registered User
Join Date: Apr 2018
Location: NW, Oregon
Posts: 51
|
Re: Flip kit for 69 C20
Are people reusing the stock spring plate? I welded on some perches and started to mount the plate. Don't like how little contact it has with the spring though.
I'm guessing I need a flat piece of steel but can't seem to find one that fits. |
|
|
|
|
05-17-2018, 12:16 AM
|
#7 |
|
Registered User
Join Date: Jan 2014
Location: SoCal
Posts: 281
|
Re: Flip kit for 69 C20
http://www.airbagit.com/1965-1972-CH...li-che-20b.htm
http://www.x2industries.com/chevrole...l#.Wv0CUBKG-1t https://www.streetpros.com/product_i.../_C-Notch.html Last edited by PepperTreeGarage; 05-17-2018 at 12:42 AM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
