The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-13-2002, 02:30 PM   #1
imdarren
Registered User
 
imdarren's Avatar
 
Join Date: Oct 2001
Location: SW Washington
Posts: 1,006
Post Need Steering Help. Round 2

Found the correct coupler at the bone yard. Got it all hooked up. Followed the factory service manual, and filled the pump and started the truck for about 2 or 3 seconds. Then topped off the fluid. Repeated this until the level was good.
When I turn, the pump makes a growling sound the more I turn. Going straight it's quiet. I'm using synthetic fluid. However the bottle says it meets GM specs.
Any Ideas Guys??
Also the steering seems real sensitive. Would a slightly long pitman arm contribute to the growling noise? It looks the correct length. I'm just curious. Darren

------------------
Darren
Washougal, Washington
darrengale67@hotmail.com

1972 GMC C1500 (Bone Stock)

Saving / Looking for a 72 SWB 4X4 Or 2WD Automatic with little or no rust.

__________________
Washington State

1967 Chevy C10 LWB Rodstoration In Progress.
1972 K20 Cheyenne Super
imdarren is offline   Reply With Quote
Old 04-13-2002, 02:34 PM   #2
Desert Rat
Senior Member
 
Desert Rat's Avatar
 
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
Post

Jack it up,and turn the wheel back and forth ALOT to get the air out of the pump,with the engine off,make sure to keep it full.Dont drive it with a bunch of air in it,or you might be taking that one back for another one.
Desert Rat is offline   Reply With Quote
Old 04-13-2002, 03:49 PM   #3
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Post

Really, you don't even have to jack it up, but it is easier on the pump if you do.
With the engine running, turn from lock to lock holding it on either end for 1 to 2 seconds. This will 'bleed' the system.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio


Longhorn Man is offline   Reply With Quote
Old 04-13-2002, 07:51 PM   #4
imdarren
Registered User
 
imdarren's Avatar
 
Join Date: Oct 2001
Location: SW Washington
Posts: 1,006
Post

Desert Rat and Longhornmail,
Thanks! That did it!! I'm the proud owner of a truck with power disk brakes (Last weekend) and now Power steering!! It is awesome! It all works great! Leakes oil from the gearbox and evrything. Just like evryone elses. Also installed the (smaller) Black paded steering wheel from an early 90's pickup. I'm loving life! Darren

------------------
Darren
Washougal, Washington
darrengale67@hotmail.com

1972 GMC C1500 (Bone Stock)

Saving / Looking for a 72 SWB 4X4 Or 2WD Automatic with little or no rust.

__________________
Washington State

1967 Chevy C10 LWB Rodstoration In Progress.
1972 K20 Cheyenne Super
imdarren is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com