The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech > Paint and Bodywork


Thread Tools Display Modes
Old 10-22-2017, 02:14 PM   #1
Registered User
Join Date: Sep 2016
Location: Lexington, Ky
Posts: 48
Bare metal prep

Just had my truck blasted to bare metal. What should I treat it with to prevent surface rust before I can get it into the body shop?
Posted via Mobile Device
Drew3 is offline  
Old 10-22-2017, 02:15 PM   #2
Senior Member
Jcfcamaro's Avatar
Join Date: Jul 2015
Location: Fairfax, Missouri
Posts: 639
Re: Bare metal prep

I would say epoxy primer
Jcfcamaro is offline  
Old 10-22-2017, 02:32 PM   #3
Senior Member
RodnRudy's Avatar
Join Date: Oct 2014
Location: New Palestine In
Posts: 513
Re: Bare metal prep

I used Dupont KWIK PREP 244S. I used a spritz bottle to spray a light film on the metal and used an air blow gun to dry it quickly. A fine mist is all that's needed. It forms a barrier on the metal to keep it from rusting.
If you can't find KWIK PREP at your paint jobber they can recommend a product that will work.
"Money is only a tool to create and achieve what you want most in life"
RodnRudy is online now  
Old 10-22-2017, 03:01 PM   #4
Senior Member
tjc's Avatar
Join Date: Jun 2011
Location: burlington,iowa
Posts: 251
Re: Bare metal prep

what did you have it blasted with, what kind of material ?
Tom in Iowa
68 L88 C10
68 4x4 C10 soon
tjc is offline  


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 09:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 1997-2013