The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-12-2017, 04:46 PM   #1
old51sedan
Senior Member
 
old51sedan's Avatar
 
Join Date: Oct 2015
Location: Williamston, Mi
Posts: 237
Question New tilt wiring problem

I installed a new repo tilt column a week or so ago and had a question then about the wire for indicator light which you guys helped me with. Now I have a problem with the wiring harness. I had turn signals, brake light and etc. with the old column, but nothing with the new one. I had to buy an adapter to go from the flat plug on the new column to the curved one in the truck. I thought that was the problem, but have remove it back to the original harness and of the 8 wires I only have power to one which is the Black one ( horn connection) When I turn the key on I have power to the purple one which is the turn signal flasher. My truck is a 69 and I have a gauge cluster. All of my fuses test good with the exception of one in the upper right hand corner next to the PNL spade. I can't think of anything that I have disconnected, it's driving me crazy. What am I doing wrong?
old51sedan is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com