The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-13-2016, 12:22 PM   #1
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
1978 Russet Metallic 4x4

I've been lurking for awhile. And through the help of some good folks on the board, gathering hard to find parts. I wanted to share a few interior photos of the project with some explanation.

This is my Dad's 1978 K5 Blazer he bought new. He needed a good truck to run around oilfield roads to check on our companies wells. It's also the vehicle my brother and I learned to drive. Dad hasn't driven it much over the past 20 years because it wasn't dependable anymore and road like crap.

That's where I come in. We've put a Ramjet 350 in it and added Offroad Design suspension components. In the mid 90's he sent it over to a conversion van outfit over in Shreveport where they unsurprisingly made it look like a conversion van: super plush velour, high gloss woodtrim accents and shag looking carpet. It was new feeling, but they removed the center console in favor of a combo bench. They eliminated the flip-up passenger bucket and the ability to access the rear bench easily. It just was wrong ultimately. I wanted to restore the vehicle to 1978 like condition. But I also wanted to pick and choose pieces from adjacent years that spruced up the vehicle (like the '77 woodgrain stuff).

Let's get started. I liked the older style Cheyenne emblem with the longhorn over the orange one. The next picture is a better overall shot, but this first one included the '73-'77 woodgrain steering wheel.








The truck originally came with the mandarin orange vinyl. As many of you know, these interiors came in blue, red, buckskin and mandarin. The first three had a premium cloth option, the mandarin did not. All you could get was the custom vinyl. I had one of the storehouses send me some samples.



What I suspect is that the 7438 may have been designed to work for both the buckskin and the mandarin interiors. It just never was delivered in that combination. Well.......I fixed that. These seats are factory materials in a new combination. I like the look. If you look closely, you'll see some missing items we're working through. I'll provide updates as they come.

Last edited by buffydores; 05-13-2016 at 12:51 PM.
buffydores is offline   Reply With Quote
Old 05-13-2016, 12:35 PM   #2
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Here's something cool. I tried to restore the original mud mats, but they're just too oxidized. After some interwebbing, I found some super thick rubber that matches my interior color very well. I'm gonna cut to fit.


Last edited by buffydores; 05-13-2016 at 12:51 PM.
buffydores is offline   Reply With Quote
Old 05-13-2016, 12:41 PM   #3
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Here's a factory accessory step I overpaid for on eBay (used would have been much better). Out of the box, they're kinda silly for a lifted truck (did I mention the 4" lift?). We modified the steps to be 5" lower and stick 3" out further. Then powdercoat silver. I forgot to photograph that, but I'll show the finished ones attached.

buffydores is offline   Reply With Quote
Old 05-13-2016, 08:14 PM   #4
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 4,815
Re: 1978 Russet Metallic 4x4

Sweet truck and congrats on getting rid of the conversion van interior.
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 05-13-2016, 08:26 PM   #5
mrtoni
Senior Member
 
Join Date: Jan 2009
Location: sparks, nevada
Posts: 523
Re: 1978 Russet Metallic 4x4

Those are my favorite seats. I have two low back tan vinyl with orange plaid and two high back red/ red plaid. Yours look great.
mrtoni is offline   Reply With Quote
Old 05-17-2016, 03:15 PM   #6
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by mrtoni View Post
Those are my favorite seats. I have two low back tan vinyl with orange plaid and two high back red/ red plaid. Yours look great.
Thanks. Brand new 40 year old seats.
buffydores is offline   Reply With Quote
Old 05-21-2016, 08:38 AM   #7
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Paint is shaping up, and the new black stripes in the trim. The rear glass went in a few hours later. Needed to add some steering fluid and bleed it out.
buffydores is offline   Reply With Quote
Old 05-21-2016, 08:41 AM   #8
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Test fitting the reworked GM accessory steps. The step now hangs halfway between the ground and the floor. There's the concern about being hit by debris, but Dad is 70. I'll pay for the repair. I'd much rather Dad be able to get in his Blazer safely.


Last edited by buffydores; 05-21-2016 at 08:53 AM.
buffydores is offline   Reply With Quote
Old 05-21-2016, 08:48 AM   #9
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Here's a nice touch Dad doesn't know about. He'll really like this. I had the glass etched with the old company logo.

buffydores is offline   Reply With Quote
Old 05-24-2016, 08:47 PM   #10
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Interesting tidbit. I purchased a replacement seal for the side glass, but after looking at the original for a bit, we realized it was in phenomenal condition. Not a single crack in a 40 year old seal.
buffydores is offline   Reply With Quote
Old 05-24-2016, 11:09 PM   #11
phillipm
Senior Member
 
Join Date: Oct 2014
Location: Scottsdale, AZ
Posts: 312
Re: 1978 Russet Metallic 4x4

You can actually get vinyl cut and it looks just like etched glass. Just for future reference. Killer looking truck!
phillipm is offline   Reply With Quote
Old 05-25-2016, 05:48 AM   #12
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by phillipm View Post
You can actually get vinyl cut and it looks just like etched glass. Just for future reference. Killer looking truck!
Thanks for the tip. Cool to know. But in this case, the whole point is to make it permanent. There was a sticker there for 30 years, but it had faded bad.
buffydores is offline   Reply With Quote
Old 05-25-2016, 08:13 PM   #13
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

I soldered some resistors on these LED dome lights I purchased to address the ambient voltage. I'll see if they work tomorrow. The LMC kit had some silly blueish LEDs. These are much warmer and brighter with some yellow light.



To get the 34" spare to fit, we moved the whole bracket up an inch; however, we still need to move the hole for the carriage bolt over around 2". I'm gonna lift it another inch while we're at it. We're gonna use a triangulated plate of 5/16" to make it. Then paint it with the same black Imron. I wonder if any other clearance issues will develop on the bracket.


Last edited by buffydores; 05-25-2016 at 08:32 PM.
buffydores is offline   Reply With Quote
Old 05-26-2016, 11:37 AM   #14
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

The LED lights work great now.

Updated picture of the door. The speaker screen is not an exact match, but good enough for now.



Here's what 40 year rubber looks like. Wow!



Dad's custom bumper from the 70s.



Winch has been sprayed with Imron Black. Waiting on an old school Ramsey logo decal.



Touch up paint on the emblems. Anybody know where to get that mustard yellow paint?

buffydores is offline   Reply With Quote
Old 05-26-2016, 11:49 AM   #15
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 4,815
Re: 1978 Russet Metallic 4x4

Man that looks good. For emblem paint: http://squarebodysyndicate.com/sbs-formula.html
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 05-26-2016, 01:05 PM   #16
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

I like these next couple of shots of the interior. You can see the better Cheyenne badge on the dash. If you look close, you can see the new pedals.


buffydores is offline   Reply With Quote
Old 05-26-2016, 01:21 PM   #17
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 4,815
Re: 1978 Russet Metallic 4x4

Where did you get the dash pad? It looks too nice to be original.
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 05-26-2016, 01:25 PM   #18
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

A company called Just Dashes in California will take the original and rewrap in new vinyl. Expensive, but it's an original dash.
buffydores is offline   Reply With Quote
Old 05-27-2016, 05:44 PM   #19
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

A couple more photos. Wanted to show how wonderful the passenger side seat turned out. Found a great seat bracket on eBay that we retouched with satin black.



Great door sill treatment:

buffydores is offline   Reply With Quote
Old 05-27-2016, 05:45 PM   #20
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Anybody figure a good way to keep the seat belt up so it doesn't drag on the seat when lifted?
buffydores is offline   Reply With Quote
Old 05-27-2016, 09:48 PM   #21
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 4,815
Re: 1978 Russet Metallic 4x4

I have a military Blazer, and somehow those are in great shape in my truck. They are not exactly like the civilian ones but they'll work. You might use a set of those if you can find some. There's several guys online that part out CUCV's.
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 05-28-2016, 03:33 PM   #22
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

I bought HDPE plastic binder at Office Depot. I'm gonna cut a slither of that and use it to prop the seat belt up with a zip tie. Semi-ghetto, but I'll do that until I think of something better.
buffydores is offline   Reply With Quote
Old 05-31-2016, 04:27 PM   #23
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Not surprisingly, the AC wasn't working after sitting around for close to two years. So I drove it over to the AC shop for some TLC. I can't tell you how awesome it was to simply roll the window down with the dash mounted switch when I needed some natural air.

Decent side view. Need better light, but you get the picture:



Pictures just don't do this LED light justice:



Got the screw-in caps dyed and over the seat belt bolt holes. Looks good.



Getting there:

buffydores is offline   Reply With Quote
Old 06-01-2016, 12:44 AM   #24
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: AZPartsLocators.com Phoenix AZ
Posts: 3,360
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by 68Timber View Post
Man that looks good. For emblem paint: http://squarebodysyndicate.com/sbs-formula.html
John, kind of funny you mentioned that! It was actually me that hooked Joe(Squarebody Syndicate) up on the yellow spray paint. I had been using it forever when he was still using model brush paint. I will also add that the spray will last a LOT longer than any model paint! It is designed for industrial outdoor use. Thank being said, that Blazer is beautiful!
__________________
1977 Crew Cab Shortbed with 4BT Intercooled Cummins Diesel and a 4L80E
AZPartsLocators on Instagram
1774btcrew is offline   Reply With Quote
Old 06-05-2016, 05:30 PM   #25
buffydores
Senior Member
 
Join Date: Mar 2016
Location: Longview, TX
Posts: 205
Re: 1978 Russet Metallic 4x4

Quote:
Originally Posted by 1774btcrew View Post
Thank being said, that Blazer is beautiful!
Thanks Jeff. The more I'm around the mandarin orange with orange plaid interior the more I question why GM never pulled the trigger on the combo. It feels so honest to the 70s vibe.
buffydores is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com