rhoads lifters - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stryder67 · 02-03-2018, 02:08 AM

hey all. I'm putting together a 355 for my 67 c10 and came across the Rhoads original lifters. After reading on them they don't sound to terribly bad. The cam I have picked out is Lunati's 276/284 voodoo grind. Running Pro Comp aluminum heads with about 10.2:1 compression. Do you think these lifters are worth a try in it or am I barking up the wrong tree? Also as I understand it these lifters tick somewhat. Does this sound similar to a mechanical cam or is it noisier than that?

Thanks in advance
-Stryder67

02-03-2018, 02:08 AM	#1
Stryder67 Registered User Join Date: May 2016 Location: Neligh, NE Posts: 30	rhoads lifters hey all. I'm putting together a 355 for my 67 c10 and came across the Rhoads original lifters. After reading on them they don't sound to terribly bad. The cam I have picked out is Lunati's 276/284 voodoo grind. Running Pro Comp aluminum heads with about 10.2:1 compression. Do you think these lifters are worth a try in it or am I barking up the wrong tree? Also as I understand it these lifters tick somewhat. Does this sound similar to a mechanical cam or is it noisier than that? Thanks in advance -Stryder67



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.