The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-09-2017, 08:10 PM   #1
MotoWells
Registered User
 
Join Date: Apr 2015
Location: Port Orchard, WA
Posts: 38
High Idle Code p0507

Recently did an ls swap in my 71 GMC 4x4 with a crate GM 6.2 Aside from an annoying radiator issue the mill has been breaking in great.

My issue, I recently through a code p0507: idle air control system revolutions per minute higher than expected

My idle is great, actually fairly low 600-700 when warm. No surges, runs beautiful. From searches on this forum as well as lstech it seems as though most common culprit for this code is vacuum leak. No other codes thrown just the P0507

Here is what I have done to attempt to fix:

Recent checked and tightened vacuum hose to break booster.

Capped the drivers side valve cover vent

Plumbed passenger side valve cover vent to intake

Capped EVAP

I cleared the code and it was fine for about three trips and then it triggered again.

I am using a GM wiring harness and computer.

I am attaching pictures to see if anything is obvious, thanks in advance.
Attached Images
   
MotoWells is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com