The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-20-2014, 05:14 PM   #1
Mr-Jack
Beer Drink'n Knuckle Dragger
 
Mr-Jack's Avatar
 
Join Date: Mar 2010
Location: Eatonville, WA
Posts: 493
P0342 scan code Camshaft Position Sensor?

Hey y'all,

First off, i'm talking about my 2002 Chevy 2500HD with the 8.1 / Allison Setup. has brand new iridium plugs and 10.4mm Taylor cables installed about 3500 miles ago.

About a week ago, I woke up early and drove into work. Stopped at the gas station on the way in to work, and when I got back into the truck, it didn't start on the first try like it normally always does. I waited a second or 2 then cranked it over and it fired up and drove fine to work which was about a mile from where the gas station was.

I have a scan tool in the truck, and it threw the P0342 Code indicating low voltage condition for the cam position sensor.

I have looked all over the place and they are hard to source, but i've done some reading that leads me to believe that it could be the Crank Position Sensor causing the problem.

Has anyone had any experience with this that can give me some advice? The no-start thing has only happened 2 or 3 times total in the past week, and hasn't left me stranded. But when i was driving to work this morning, the Check engine light was still on, and as i was coming to a stop sign at the end of my dirt road, and when i went to give it gas, it acted like it wanted to stall...i put a little more weight in my foot and it gave in to me and drove fine.

Thanks in advance fellas,

Jack
__________________
GOD BLESS MY BROTHERS & SISTERS THAT SERVE WITH US
- 67 GMC Long-Wide 350/SM420
My BACON Wrapped Meatloaf Recipe
Mr-Jack is offline   Reply With Quote
Old 10-20-2014, 10:28 PM   #2
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Re: P0342 scan code Camshaft Position Sensor?

Wow!! I have had that happen a couple times after tuning-up 8.1L's, A Cam Sensor fixed it both times, Had to eat it both times as well...For Customer relations and all.

For all the Crank Sensor issues they have, I thought my cases was isolated
clinebarger is offline   Reply With Quote
Old 10-21-2014, 08:41 PM   #3
Mr-Jack
Beer Drink'n Knuckle Dragger
 
Mr-Jack's Avatar
 
Join Date: Mar 2010
Location: Eatonville, WA
Posts: 493
Re: P0342 scan code Camshaft Position Sensor?

So since everyone seems to be out of these sensors, would you know where I can get one?
__________________
GOD BLESS MY BROTHERS & SISTERS THAT SERVE WITH US
- 67 GMC Long-Wide 350/SM420
My BACON Wrapped Meatloaf Recipe
Mr-Jack is offline   Reply With Quote
Old 10-21-2014, 09:11 PM   #4
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Re: P0342 scan code Camshaft Position Sensor?

Your local AC-Delco Dealer, That may limit you to the parts department of your local Dealer.
clinebarger is offline   Reply With Quote
Old 10-22-2014, 12:05 AM   #5
Mr-Jack
Beer Drink'n Knuckle Dragger
 
Mr-Jack's Avatar
 
Join Date: Mar 2010
Location: Eatonville, WA
Posts: 493
Re: P0342 scan code Camshaft Position Sensor?

Already exhausted those avenues. Discontinued is what I get
__________________
GOD BLESS MY BROTHERS & SISTERS THAT SERVE WITH US
- 67 GMC Long-Wide 350/SM420
My BACON Wrapped Meatloaf Recipe
Mr-Jack is offline   Reply With Quote
Old 10-22-2014, 07:34 PM   #6
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Re: P0342 scan code Camshaft Position Sensor?

According to my parts manual The CMP Sensor Part# is 12570674.

This place on Amazon shows to have one in stock CMP Sensor CMP Sensor
clinebarger is offline   Reply With Quote
Old 10-30-2014, 09:07 PM   #7
Mr-Jack
Beer Drink'n Knuckle Dragger
 
Mr-Jack's Avatar
 
Join Date: Mar 2010
Location: Eatonville, WA
Posts: 493
Re: P0342 scan code Camshaft Position Sensor?

Hope that's the right one because I just ordered it. Lol. I'll report back in a week. Hopefully the ckp doesn't fail
__________________
GOD BLESS MY BROTHERS & SISTERS THAT SERVE WITH US
- 67 GMC Long-Wide 350/SM420
My BACON Wrapped Meatloaf Recipe
Mr-Jack is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com