67 (Crew Cab) C30 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Getter-Done** · 01-04-2020, 09:18 PM

Quote:

Originally Posted by 1968k20

Wow, impressive! How much does your helper get paid per hour?

Thanks.
All the Scooby snacks she can eat

.

**Getter-Done** · 01-07-2020, 12:02 AM

I made 2 chisels out of some dull files.
This is what I used to separate the B-pillar
in the next post.
Name: f01.JPG
Views: 1275
Size: 29.8 KB

.

.

**Getter-Done** · 01-07-2020, 12:10 AM

Here is the b-pillar
in the first stage of separation.

light Sanding Looking for spot welds.

Name: bp1.JPG
Views: 1266
Size: 25.0 KB

predrill spot weld before chiseling.
Name: bp2.JPG
Views: 1260
Size: 36.4 KB

Opened up for Inpection

.

**Getter-Done** · 01-12-2020, 09:21 AM

More B-Pillar work.
I am removing the inner brace and
the door latch (catch).
Name: b-pillar01.JPG
Views: 1181
Size: 37.5 KB

Here are the spot welds(circled in red)
that I drilled out.
Name: b-pillar02.JPG
Views: 1186
Size: 36.2 KB

View of spot welds on upper part of reinforcement brace.
I use my sharpen file to separate the welds.
Name: b-pillar03.JPG
Views: 1178
Size: 38.1 KB

for reference ^^^Upper-hinge mount location ^^^
v . vvvLower hinge mount location vvvvvvv
Name: b-pillar04.JPG
Views: 1187
Size: 39.3 KB

This is the tabs that hold the nut plate in.
Used a screwdriver to open them up.
Name: b-pillar05.JPG
Views: 1178
Size: 36.4 KB

**Getter-Done** · 01-12-2020, 09:30 AM

Name: b-pillar06.JPG
Views: 1179
Size: 35.9 KB

The capture nut plate had sealer
on it. It was still held in place good
even after all these years.
Name: b-pillar07.JPG
Views: 1185
Size: 35.5 KB

Name: b-pillar08.JPG
Views: 1181
Size: 33.0 KB

Here Is the inner brace and latch assembly removed.
Name: b-pillar09.JPG
Views: 1181
Size: 37.5 KB

Here is the row of welds that hold the main 2 pieces together.
Name: b-pillar10.JPG
Views: 1177
Size: 38.0 KB

**Getter-Done** · 01-12-2020, 09:39 AM

More pictures of the spot-welds
that hold the 2 pieces together.

Name: b-pillar11.JPG
Views: 1180
Size: 39.7 KB

These where welded very good.
Spot-welds are real close together.
Name: b-pillar12.JPG
Views: 1181
Size: 37.7 KB

**1968k20** · 01-12-2020, 05:33 PM

Was the helper napping on the job today?

**Getter-Done** · 01-12-2020, 11:20 PM

Quote:

Originally Posted by 1968k20

Was the helper napping on the job today?

Dolly was being Non- photo-gentic today.
I guess the storms from last night had her in dismay

.

**Getter-Done** · 01-12-2020, 11:50 PM

A little more work on the floor-pans.
2 floor pans (Jammed Together)
Name: fl1.JPG
Views: 1146
Size: 43.3 KB

Rocker Panels --Mated together

.

**1968k20** · 01-13-2020, 07:18 AM

Quote:

Originally Posted by Getter-Done

Dolly was being Non- photo-gentic today.
I guess the storms from last night had her in dismay

.

Poor girl!

**Getter-Done** · 01-14-2020, 11:41 PM

Still working on the Platform.
I will /Cut/and use this piece for the section
of floor below third door hinge.
Name: f11.JPG
Views: 1105
Size: 31.7 KB

Watch This

Just like magic My helper made this cutout.

I will tell ya'll the trick (Bacon Grease)

(just kidding)

.

.

**Getter-Done** · 01-16-2020, 12:01 AM

A few pictures of Dissecting
the B-Pillar.
Name: bp01.JPG
Views: 1076
Size: 38.8 KB

Name: bp02.JPG
Views: 1078
Size: 39.6 KB

Name: bp03.JPG
Views: 1083
Size: 35.9 KB

Name: bp04.JPG
Views: 1084
Size: 42.0 KB

Name: bp05.JPG
Views: 1044
Size: 41.1 KB

.

**Getter-Done** · 03-02-2020, 12:53 AM

Posting pictures so I can share di-secting the Suburb-n b-post.
I am matching the truck cab to the Suburb door post stuff.
Just mapping things out to get the roof and headliner
layout and make my plan.
Name: rr1.JPG
Views: 980
Size: 38.1 KB

.

**Getter-Done** · 03-02-2020, 12:56 AM

.

.

.

**Getter-Done** · 03-02-2020, 12:58 AM

.I will blend these rails in to make my top roof rail.
Name: rr11.jpg
Views: 973
Size: 43.5 KB

.

**Getter-Done** · 03-09-2020, 11:51 PM

.

Name: 3door.jpg
Views: 912
Size: 41.6 KB

I am very busy at work.
I have been trying to take pictures of my Slow Planned progress.
The last few post are Possible plans of my Headliner / Roof.

.

.

**GOPAPA** · 07-07-2020, 07:32 AM

You have a lot of determination going on there in the slow process of putting it all togeather,, and you have some pretty good skills in doing so .. I know what you mean about having a lot at work happening and keeping you from your fun job at home.. I couldnt wait to get home to my projects .. looking good what you have done and when done ,,you can stand back and be happy with how you did it all.

**Getter-Done** · 07-07-2020, 05:25 PM

Quote:

Originally Posted by GOPAPA

You have a lot of determination going on there in the slow process of putting it all togeather,, and you have some pretty good skills in doing so .. I know what you mean about having a lot at work happening and keeping you from your fun job at home.. I couldnt wait to get home to my projects .. looking good what you have done and when done ,,you can stand back and be happy with how you did it all.

Thanks for the kind words.
I hope to get the I-beam frame in the garage in a month or so.
Then I can start (making it look like something)

.
I have most of the Major parts now.

.

tutone · 07-07-2020, 09:29 PM

Good work, and it looks very complicated. I dig the plan and hope to see it someday.

CG · 07-11-2020, 07:30 PM

Wow all of this thinking makes my brain hurt. I cant even figure out how to build a flatbed without a zillion questions.

This thing is gonna be very cool!

**Getter-Done** · 07-11-2020, 10:34 PM

Quote:

Originally Posted by tutone

Good work, and it looks very complicated. I dig the plan and hope to see it someday.

Thanks
Maybe in pigeon forge / If I can get time to work on it again.
I go there for the rod run .

.

**Getter-Done** · 07-11-2020, 10:46 PM

Quote:

Originally Posted by CG

Wow all of this thinking makes my brain hurt. I cant even figure out how to build a flatbed without a zillion questions.

This thing is gonna be very cool!

Thanks for the Inspiring words.

I have been collecting parts.
I plan to get back on this soon.
I have been side tracked.
I will Post Pictures.

**Gregski** · 04-05-2022, 12:02 AM

Quote:

Originally Posted by Getter-Done

Thanks for the Inspiring words.

I have been collecting parts.
I plan to get back on this soon.
I have been side tracked.
I will Post Pictures.

um, well?

**3757chevy** · 04-05-2022, 12:36 AM

Quote:

Originally Posted by Gregski

um, well?

**Getter-Done** · 04-05-2022, 06:05 AM

Yeah

I need to update this

I have got a small bit more done.

01-07-2020, 12:02 AM	#102
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 I made 2 chisels out of some dull files. This is what I used to separate the B-pillar in the next post. . . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

01-07-2020, 12:10 AM	#103
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 Here is the b-pillar in the first stage of separation. light Sanding Looking for spot welds. predrill spot weld before chiseling. Opened up for Inpection . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

01-12-2020, 09:21 AM	#104
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 More B-Pillar work. I am removing the inner brace and the door latch (catch). Here are the spot welds(circled in red) that I drilled out. View of spot welds on upper part of reinforcement brace. I use my sharpen file to separate the welds. for reference ^^^Upper-hinge mount location ^^^ v . vvvLower hinge mount location vvvvvvv This is the tabs that hold the nut plate in. Used a screwdriver to open them up. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

01-12-2020, 09:30 AM	#105
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 The capture nut plate had sealer on it. It was still held in place good even after all these years. Here Is the inner brace and latch assembly removed. Here is the row of welds that hold the main 2 pieces together. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

01-12-2020, 09:39 AM	#106
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 More pictures of the spot-welds that hold the 2 pieces together. These where welded very good. Spot-welds are real close together. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

01-12-2020, 05:33 PM	#107
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: 67 (Crew Cab) C30 Was the helper napping on the job today? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

01-12-2020, 11:50 PM	#109
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 A little more work on the floor-pans. 2 floor pans (Jammed Together) Rocker Panels --Mated together . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

01-14-2020, 11:41 PM	#111
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 Still working on the Platform. I will /Cut/and use this piece for the section of floor below third door hinge. Watch This Just like magic My helper made this cutout. I will tell ya'll the trick (Bacon Grease) (just kidding) . . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

01-16-2020, 12:01 AM	#112
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 A few pictures of Dissecting the B-Pillar. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-02-2020, 12:53 AM	#113
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 Posting pictures so I can share di-secting the Suburb-n b-post. I am matching the truck cab to the Suburb door post stuff. Just mapping things out to get the roof and headliner layout and make my plan. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-02-2020, 12:56 AM	#114
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 . . . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-02-2020, 12:58 AM	#115
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 .I will blend these rails in to make my top roof rail. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-09-2020, 11:51 PM	#116
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 . I am very busy at work. I have been trying to take pictures of my Slow Planned progress. The last few post are Possible plans of my Headliner / Roof. . . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

07-07-2020, 07:32 AM	#117
GOPAPA "Tail Gate Best Seat In House" Join Date: Oct 2007 Location: Nampa Idaho Posts: 7,338	Re: 67 (Crew Cab) C30 You have a lot of determination going on there in the slow process of putting it all togeather,, and you have some pretty good skills in doing so .. I know what you mean about having a lot at work happening and keeping you from your fun job at home.. I couldnt wait to get home to my projects .. looking good what you have done and when done ,,you can stand back and be happy with how you did it all. __________________ When you learn a thing a day you store up smart.

07-07-2020, 09:29 PM	#119
tutone Registered User Join Date: Mar 2016 Location: hickory, ky Posts: 1,248	Re: 67 (Crew Cab) C30 Good work, and it looks very complicated. I dig the plan and hope to see it someday. __________________ :My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=807535 1971 c10 swb/1972 K10 swb/1968 Camaro 350/4spd 1955 210 2 dr sedan/1998 RCSB Z71



Register or Log In To remove these advertisements.

07-11-2020, 07:30 PM	#120
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,768	Re: 67 (Crew Cab) C30 Wow all of this thinking makes my brain hurt. I cant even figure out how to build a flatbed without a zillion questions. This thing is gonna be very cool! __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291

04-05-2022, 06:05 AM	#125
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,697	Re: 67 (Crew Cab) C30 Yeah I need to update this I have got a small bit more done. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.