|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-19-2018, 10:43 PM
|
#1 |
|
Registered User
Join Date: Aug 2013
Location: Fort Worth, TX
Posts: 309
|
Bracket & Brace Questions - Where do they go?
First pic is braces for power brake booster. Where do they go? I think the round bar bolts to the top bolt behind booster and the fire wall driver side. Can't figure out the other. Any pics or description on where it bolts?
Second pick is hood latch and brace that goes beneath it. Where does the third piece go? Basically an angle iron with 4 holes. Any help is much appreciated.
__________________
Zane's 71 Build |
|
|
|
11-19-2018, 11:26 PM
|
#2 |
|
Registered User
Join Date: Nov 2012
Location: 9
Posts: 862
|
Re: Bracket & Brace Questions - Where do they go?
Top bracket goes from drivers side stud on the front booster(the one the master cylinder bolts too) down to the fire wall, there is a threaded hole down by the steering column and floor support where it spot welds to the fire wall.
Second bracket goes from the back upper drivers side stud on the booster to the top bolt on the e-brake bracket where it bolts to the firewall. Last bracket goes on the drivers side inner fender. Last edited by sprint_9; 11-19-2018 at 11:36 PM. |
|
|
|
|
11-20-2018, 12:22 AM
|
#3 |
|
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Bracket & Brace Questions - Where do they go?
Here's some pics, not great but they might help:
|
|
|
|
|
11-20-2018, 01:38 AM
|
#4 |
|
Senior Member
 
Join Date: Sep 2014
Location: Lake Tapps, Wa.
Posts: 607
|
Re: Bracket & Brace Questions - Where do they go?
Yes,
the bracket goes on the drivers side inner fender. |
|
|
|
|
11-20-2018, 07:26 AM
|
#5 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Bracket & Brace Questions - Where do they go?
Your last picture is the drivers side fender bracket as pictured above, hood release and the grille to radiator support piece at the hood release mounts to.
Its in between the front grille and support in the middle of the truck. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
11-20-2018, 08:47 AM
|
#6 |
|
Registered User
Join Date: Feb 2016
Location: Trenton,Ontario & South Carolina
Posts: 755
|
Re: Bracket & Brace Questions - Where do they go?
Inner fender brace should be turned around,large edge up.
|
|
|
|
|
11-20-2018, 05:26 PM
|
#7 | |
|
Registered User
Join Date: Aug 2013
Location: Fort Worth, TX
Posts: 309
|
Re: Bracket & Brace Questions - Where do they go?
Quote:
Thank you very much!
__________________
Zane's 71 Build |
|
|
|
|
|
11-20-2018, 05:27 PM
|
#8 | |
|
Registered User
Join Date: Aug 2013
Location: Fort Worth, TX
Posts: 309
|
Re: Bracket & Brace Questions - Where do they go?
Quote:
I don't know how some guys tear vehicles down and put them back together years later. It has only been since July...
__________________
Zane's 71 Build |
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
