MD Radio Delete Cowl & GMC Fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 10-07-2013, 11:24 AM

I just committed to buying some parts here and have decided to let some good stuff go to help pay for it. No PayPal,so postal money order is preferred. I recommend Greyhound,if possible for a buyer,otherwise FedEx is who I'll use.
First is the radio delete cowl cover. Straight/Original paint/Some surface rust...$75 + shipping

**special-K** · 10-07-2013, 11:35 AM

This is an original paint rust free passenger side fender with zero battery rust. There are dents that will require some attention. I left it as is. I have not found a reproduction '68 Chevy/68-72 GMC passenger fender made correctly,so here is one that is made right that just needs some easy dent repair...$150 + shipping

**special-K** · 10-08-2013, 10:09 AM

I crate things properly,yet as light as possible to keep cost down.

**special-K** · 10-10-2013, 08:32 AM

These parts are being offered in fall colors

**jabborabbo** · 10-10-2013, 09:10 AM

What would shipping be for the radio delete cowl to 37334?

Thanks!

**68 Four on the Floor** · 10-10-2013, 11:09 AM

Any chance you have a driver side step fender?

**special-K** · 10-11-2013, 10:25 AM

Quote:

Originally Posted by jabborabbo

What would shipping be for the radio delete cowl to 37334?

Thanks!

I'll get back with a quote. Been raining cats & dogs for a few days.

Quote:

Originally Posted by 68 Four on the Floor

Any chance you have a driver side step fender?

Nope,sorry. Fresh out of Stepside fenders

**special-K** · 10-16-2013, 07:42 AM

Quote:

Originally Posted by jabborabbo

What would shipping be for the radio delete cowl to 37334?

Thanks!

Sorry it took so long. We had rain,rain,and more rain and the part was out in a dark shed with nowhere to lay a scale. I should have just guessed. I can ship this for $100 total cost,including safe packaging.

**richard2717** · 10-16-2013, 08:01 AM

Man Tim
Stop tempting me with that fender. I need one for the panel

**jabborabbo** · 10-16-2013, 08:20 AM

Quote:

Originally Posted by special-K

Sorry it took so long. We had rain,rain,and more rain and the part was out in a dark shed with nowhere to lay a scale. I should have just guessed. I can ship this for $100 total cost,including safe packaging.

When you say it has surface rust I assume that means it just needs sanding to take care of it - no filler necessary? If so then I'll take it.

**gmc 2500 4x4** · 10-16-2013, 05:54 PM

this fender is same for '69 gmc? looks like dent are just at the cup area? shipping to 14063 fedex, business. put me in line

**special-K** · 10-17-2013, 09:36 AM

Quote:

Originally Posted by jabborabbo

When you say it has surface rust I assume that means it just needs sanding to take care of it - no filler necessary? If so then I'll take it.

I'll get more pictures,so you can decide.

Quote:

Originally Posted by gmc 2500 4x4

this fender is same for '69 gmc? looks like dent are just at the cup area? shipping to 14063 fedex, business. put me in line

Yes,68-72 GMC. I'll get a quote.

Quote:

Originally Posted by richard2717

Man Tim
Stop tempting me with that fender. I need one for the panel

Hey Richard,ya snoozin'?...heh heh

**special-K** · 11-13-2013, 11:47 AM

I lost track of this thread (as in forgot). Not sure if I gave a shipping quote on the fender or not and I apologize if I didn't. It's still here and both parts are still available. Some of the vent area on the cowl cover would require spot putty on pitting. Rust has been chemically treated/converted (iron oxide to iron phosphorus) then etch primed

**gmc 2500 4x4** · 11-13-2013, 05:45 PM

#11 post, no quote yet

**special-K** · 11-13-2013, 08:13 PM

Ok,that confirms it. I'll get on it and get back to you. The hard part is figuring the size and weight of the crate

cherokeejohn · 11-15-2013, 11:40 AM

you wouldn't happen to have a TH350, or a 200 4R you want to sell do ya. I need to replace mine, it's a 72 2WD 350 LWB. I know you don't have one listed, but i figured it was worth asking considering we're about 20 mins apart. I'm just across the county. Or if you have any suggestions as to where i could find a good used trans. Right now, it's just gotta get me around.I have scoured all the boneyards around the county and no good luck. My original drive-train is going to be overhauled in the future, but the upcoming holidays and family has them on hold for a lil bit.

**gmc 2500 4x4** · 11-15-2013, 05:28 PM

if ya gotta build a crate thats to much work and will be costly, i'll pass

10-07-2013, 11:35 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Radio Delete Cowl & GMC Fender This is an original paint rust free passenger side fender with zero battery rust. There are dents that will require some attention. I left it as is. I have not found a reproduction '68 Chevy/68-72 GMC passenger fender made correctly,so here is one that is made right that just needs some easy dent repair...$150 + shipping Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 10-08-2013 at 10:06 AM.

10-08-2013, 10:09 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Radio Delete Cowl & GMC Fender I crate things properly,yet as light as possible to keep cost down. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-10-2013, 08:32 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Radio Delete Cowl & GMC Fender These parts are being offered in fall colors __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-10-2013, 09:10 AM	#5
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 739	Re: Radio Delete Cowl & GMC Fender What would shipping be for the radio delete cowl to 37334? Thanks!

10-10-2013, 11:09 AM	#6
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Radio Delete Cowl & GMC Fender Any chance you have a driver side step fender?

10-07-2013, 11:24 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Radio Delete Cowl & GMC Fender I just committed to buying some parts here and have decided to let some good stuff go to help pay for it. No PayPal,so postal money order is preferred. I recommend Greyhound,if possible for a buyer,otherwise FedEx is who I'll use. First is the radio delete cowl cover. Straight/Original paint/Some surface rust...$75 + shipping Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 10-08-2013 at 10:07 AM.

10-16-2013, 08:01 AM	#9
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,883	Re: Radio Delete Cowl & GMC Fender Man Tim Stop tempting me with that fender. I need one for the panel __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-16-2013, 05:54 PM	#11
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,887	Re: Radio Delete Cowl & GMC Fender this fender is same for '69 gmc? looks like dent are just at the cup area? shipping to 14063 fedex, business. put me in line

11-13-2013, 11:47 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Radio Delete Cowl & GMC Fender I lost track of this thread (as in forgot). Not sure if I gave a shipping quote on the fender or not and I apologize if I didn't. It's still here and both parts are still available. Some of the vent area on the cowl cover would require spot putty on pitting. Rust has been chemically treated/converted (iron oxide to iron phosphorus) then etch primed __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-13-2013, 05:45 PM	#14
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,887	Re: Radio Delete Cowl & GMC Fender #11 post, no quote yet

11-13-2013, 08:13 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Radio Delete Cowl & GMC Fender Ok,that confirms it. I'll get on it and get back to you. The hard part is figuring the size and weight of the crate __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-15-2013, 11:40 AM	#16
cherokeejohn Registered User Join Date: Aug 2013 Location: Wasteminster, Maryland Posts: 409	Re: Radio Delete Cowl & GMC Fender you wouldn't happen to have a TH350, or a 200 4R you want to sell do ya. I need to replace mine, it's a 72 2WD 350 LWB. I know you don't have one listed, but i figured it was worth asking considering we're about 20 mins apart. I'm just across the county. Or if you have any suggestions as to where i could find a good used trans. Right now, it's just gotta get me around.I have scoured all the boneyards around the county and no good luck. My original drive-train is going to be overhauled in the future, but the upcoming holidays and family has them on hold for a lil bit. __________________ 72 C/10, LWB, 5.7, Auto, with A/C F.B.I = Full Blood Indian Appalachia/Eastern Cherokee,"Tsalagi"

11-15-2013, 05:28 PM	#17
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,887	Re: Radio Delete Cowl & GMC Fender if ya gotta build a crate thats to much work and will be costly, i'll pass



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.