Project Roxy - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Last_Paladin · 07-26-2012, 09:46 PM

Quote:

Originally Posted by Rochlow

Got the engine mounted to the frame, but I'm having issues with the oil pan hitting the rack and pinion, even with the trans tail at 6 degrees. Nate built me truss tabs with engine mount points 1/4" higher than normal and this didn't resolve the problem.

Nate is going to call me tonight to try and help resolve it. But, I was curious if anyone else has run into this problem?

I did, but it was an LS motor. Had to go with .5" truss tabs and 1" mounts.

Rochlow · 07-26-2012, 11:53 PM

Quote:

Originally Posted by Last_Paladin

I did, but it was an LS motor. Had to go with .5" truss tabs and 1" mounts.

I spoke with Nate last night and he's going to make me another set of truss tabs with the engine mount point 1/2" higher than the originals.
Posted via Mobile Device

Last_Paladin · 07-27-2012, 09:43 AM

Quote:

Originally Posted by Rochlow

I spoke with Nate last night and he's going to make me another set of truss tabs with the engine mount point 1/2" higher than the originals.
Posted via Mobile Device

That should work. He already has the template, since he did it on mine

Rochlow · 07-27-2012, 09:55 AM

He said he's ran into this problem in a few cases. Both with LS motors and regular small blocks.

gringoloco · 07-28-2012, 04:22 PM

Nice work so far. I'm in...

Rochlow · 07-30-2012, 10:22 PM

Gramp's old Binks model 7 spray gun still works pretty damn good!
Posted via Mobile Device

Rochlow · 08-09-2012, 09:57 PM

Should I mask off the silver and paint the rest black?

VA72C10 · 08-09-2012, 10:39 PM

sounds like a good idea to me! Looking good!

**67cheby** · 08-09-2012, 11:51 PM

Sweet !
Posted via Mobile Device

NewType72 · 08-10-2012, 01:33 AM

love em

Rochlow · 08-12-2012, 08:47 PM

Posted via Mobile Device

72gmc350sbc · 08-12-2012, 09:11 PM

Looks awsome!

**67cheby** · 08-12-2012, 10:07 PM

Looking great !
Posted via Mobile Device

Tinkermc · 08-13-2012, 08:36 PM

still lookin good

NewType72 · 08-13-2012, 09:28 PM

ur making me jealous to get my truck down to the chassis like that. lookin pretty sweet man

YBNORML · 08-13-2012, 09:37 PM

Not quite sure how I missed this one, Looking awesome!!!! Makes me want to get back to work on mine.

Rochlow · 08-13-2012, 09:45 PM

Thanks guys.. Finally got the motor and trans sitting in the frame without jacks. A buddy of mine is rebuilding the rearend. Should be back in a couple of weeks and once I sandblast and paint the wheels, I should have a rolling chassis
Posted via Mobile Device

Rochlow · 08-29-2012, 10:42 AM

Well, first time I've picked up a spary gun in 20yrs. Results are ok. I'm told that wheels are the hardest thing to spray..

Posted via Mobile Device

**67cheby** · 08-29-2012, 10:50 AM

looks good

72blueshark · 08-30-2012, 08:40 PM

looks great! better than my wheels

darkhorse970 · 08-30-2012, 08:48 PM

[QUOTE=Rochlow;5531524]

Should I mask off the silver and paint the rest black?[/

What is the finish on these valve covers? Did you decide which way to go yet?
Posted via Mobile Device

Rochlow · 08-30-2012, 10:21 PM

It's just aluminzed spray paint in this picture. I tried to paint gloss black over them, then block sanded the script with ultra fine, but it didn't work.

So I ordered some script decals from Ecklers in silver and will repaint them gloss black and put the silver decals on them.

Mad Rods · 08-30-2012, 11:13 PM

Awesome build! How did I miss it?

Posted via Mobile Device
Posted via Mobile Device

NewType72 · 08-31-2012, 02:17 AM

Those valve covers should look killer with silver script against that black and the wheels look amazing roch awesome job and yes they are a pain I helped my father tape off my rallies to paint the centers silver what a miserable day that was

Posted via Mobile Device

made2drag · 08-31-2012, 11:32 AM

sweet!

07-27-2012, 09:55 AM	#79
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy He said he's ran into this problem in a few cases. Both with LS motors and regular small blocks.

07-28-2012, 04:22 PM	#80
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Project Roxy Nice work so far. I'm in... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

07-30-2012, 10:22 PM	#81
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy Gramp's old Binks model 7 spray gun still works pretty damn good! Posted via Mobile Device

08-09-2012, 09:57 PM	#82
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy Should I mask off the silver and paint the rest black? Last edited by Rochlow; 08-10-2012 at 11:46 AM.

08-09-2012, 10:39 PM	#83
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Roxy sounds like a good idea to me! Looking good! __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-09-2012, 11:51 PM	#84
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project Roxy Sweet ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-10-2012, 01:33 AM	#85
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: Project Roxy love em __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

08-12-2012, 08:47 PM	#86
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy Posted via Mobile Device

08-12-2012, 09:11 PM	#87
72gmc350sbc Registered User Join Date: Jul 2012 Location: BackWoods, Michigan Posts: 94	Re: Project Roxy Looks awsome! __________________ 1972 GMC LWB

08-12-2012, 10:07 PM	#88
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project Roxy Looking great ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-13-2012, 08:36 PM	#89
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,027	Re: Project Roxy still lookin good

08-13-2012, 09:28 PM	#90
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: Project Roxy ur making me jealous to get my truck down to the chassis like that. lookin pretty sweet man __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

08-13-2012, 09:37 PM	#91
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,847	Re: Project Roxy Not quite sure how I missed this one, Looking awesome!!!! Makes me want to get back to work on mine. __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

08-13-2012, 09:45 PM	#92
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy Thanks guys.. Finally got the motor and trans sitting in the frame without jacks. A buddy of mine is rebuilding the rearend. Should be back in a couple of weeks and once I sandblast and paint the wheels, I should have a rolling chassis Posted via Mobile Device

08-29-2012, 10:42 AM	#93
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy Well, first time I've picked up a spary gun in 20yrs. Results are ok. I'm told that wheels are the hardest thing to spray.. Posted via Mobile Device



Register or Log In To remove these advertisements.

08-29-2012, 10:50 AM	#94
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project Roxy looks good __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-30-2012, 08:40 PM	#95
72blueshark Registered User Join Date: Mar 2012 Location: phoenix, az Posts: 128	Re: Project Roxy looks great! better than my wheels __________________ '72 C10 deluxe long bed, 350 auto project in the works http://67-72chevytrucks.com/vboard/s...d.php?t=513464 Now accepting donations towards the Wade needs hot rod parts fund. all applicable donators will be thanked hospitably with a 12 pack of any alcoholic beverage of their choosing

08-30-2012, 08:48 PM	#96
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: Project Roxy [QUOTE=Rochlow;5531524] Should I mask off the silver and paint the rest black?[/ What is the finish on these valve covers? Did you decide which way to go yet? Posted via Mobile Device __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

08-30-2012, 10:21 PM	#97
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy It's just aluminzed spray paint in this picture. I tried to paint gloss black over them, then block sanded the script with ultra fine, but it didn't work. So I ordered some script decals from Ecklers in silver and will repaint them gloss black and put the silver decals on them.

08-30-2012, 11:13 PM	#98
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: Project Roxy Awesome build! How did I miss it? Posted via Mobile Device Posted via Mobile Device __________________ Chevy Only Tx.........

08-31-2012, 02:17 AM	#99
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: Project Roxy Those valve covers should look killer with silver script against that black and the wheels look amazing roch awesome job and yes they are a pain I helped my father tape off my rallies to paint the centers silver what a miserable day that was Posted via Mobile Device __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

08-31-2012, 11:32 AM	#100
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: Project Roxy sweet! __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

Register or Log In To remove these advertisements.