Factory Sliding Back Window - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffbo · 12-09-2002, 10:39 PM

Could anyone give me an idea as to how much $ I could fetch for the factory sliding back window out of my '72 C-10? I'm considering switching to a one piece for a smoother look.
Thanks

*Gee_Emm* · 12-09-2002, 11:01 PM

I paid about $15 for mine

*racedvl* · 12-09-2002, 11:05 PM

I paid the same for mine.

JimKshortstep4x4 · 12-10-2002, 08:03 AM

The last three that I bought, I paid $20, 15, and 5 for each.

Jim

**1970 CST Short Wide** · 12-10-2002, 11:54 AM

I'll give you $25 and shipping if you want to sell it

jeffbo · 12-11-2002, 01:27 AM

Thanks for the info. I'm going to have to get some pics of it on the board to confirm that it is a factory slider, which I'm fairly certain it is. Once I swap windows, I'll probably put it on the parts board.

12-09-2002, 10:39 PM	#1
jeffbo D.U.F. Member Join Date: Nov 2002 Location: Huron/Brookings, SD Posts: 288	Factory Sliding Back Window Could anyone give me an idea as to how much $ I could fetch for the factory sliding back window out of my '72 C-10? I'm considering switching to a one piece for a smoother look. Thanks __________________ MEMBER OF THE DISCS UP FRONT CLUB '72 C-10 LWB Highlander, A/C, tilt TH350 w/ B&M shift kit, 327LJ bored .040", cast flattops, forged crank, L31 Vortecs, 9.25:1 CR, Comp conical valvesprings, Crane Energizer single pattern 216/.454", Professional Products Power Plus Crosswind intake, Edelbrock #1406 600cfm, HEI, dual exhaust, open 3.08 12bolt '68 C-10 4spd (not running) '79 C-10 LWB Mild 350 '80 Caprice Classic, 2-dr '97 GMC K-1500, SWB, Reg. Cab, Z-71, 5.7, Auto

12-10-2002, 11:54 AM	#5
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,048	I'll give you $25 and shipping if you want to sell it __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

12-11-2002, 01:27 AM	#6
jeffbo D.U.F. Member Join Date: Nov 2002 Location: Huron/Brookings, SD Posts: 288	Thanks for the info. I'm going to have to get some pics of it on the board to confirm that it is a factory slider, which I'm fairly certain it is. Once I swap windows, I'll probably put it on the parts board. __________________ MEMBER OF THE DISCS UP FRONT CLUB '72 C-10 LWB Highlander, A/C, tilt TH350 w/ B&M shift kit, 327LJ bored .040", cast flattops, forged crank, L31 Vortecs, 9.25:1 CR, Comp conical valvesprings, Crane Energizer single pattern 216/.454", Professional Products Power Plus Crosswind intake, Edelbrock #1406 600cfm, HEI, dual exhaust, open 3.08 12bolt '68 C-10 4spd (not running) '79 C-10 LWB Mild 350 '80 Caprice Classic, 2-dr '97 GMC K-1500, SWB, Reg. Cab, Z-71, 5.7, Auto

12-09-2002, 11:01 PM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I paid about $15 for mine

12-09-2002, 11:05 PM	#3
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	I paid the same for mine.

12-10-2002, 08:03 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	The last three that I bought, I paid $20, 15, and 5 for each. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.