How about some pics of lowered 2wd - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrodchevy1999 · 11-23-2015, 12:34 PM

Quote:

Originally Posted by sierragrande71

And one last one.

nice ride

timmyraines · 11-26-2015, 10:23 PM

ff

Highlander Cycles · 12-05-2015, 04:51 PM

Name: complete grille.jpg
Views: 895
Size: 31.5 KB

2" 68 C20 Panel

gatch · 12-06-2015, 10:48 PM

1972 static dropped with cpp 2.5 spindles, 3 inch front springs with 4.5 rear springs. 245/45/20s

PHILLYDEAN · 12-07-2015, 12:25 AM

Quote:

Originally Posted by HighlanderBrad

The '67 I built.....

What drop do you go with

PHILLYDEAN · 12-07-2015, 12:36 AM

Name: image.jpg
Views: 903
Size: 44.4 KB

I know it isn't lowered but I will be as soon as I figure out the air ride.

Daveiaff · 12-07-2015, 08:36 AM

Rally Wheels with spacers lower a arm rubbed at wheel weights, now has salt flats.

Daveiaff · 12-07-2015, 08:41 AM

My parts suburban, not on bags but the trailer has air ride. This trailer was stolen south of Pittsburgh, PA if anyone has seen it? LOL

Daveiaff · 12-07-2015, 08:58 AM

Burb in back with a Blazer door to suburban door window frame swap. The frame of my '67 step side - lowering the rear with a frame stack, adding fish plates today.

Stained Soul · 12-23-2015, 03:16 AM

Here's mine.
Not sure what the PO did for the drop.
I put on the 18" tires/rims.
Trying to decide on bagging the ol'girl

**LockDoc** · 12-23-2015, 01:43 PM

-
I think my '67 Panel Truck is only lowered about 2 1/2 inches. The PO did it and I haven't really checked it out at this point. I wanted to wait until I had the LS1/4l60e installed to see where it was at..... I have about 2000 miles on it now so I can check it closer next Spring when I get it back out.

LockDoc

Dburger · 01-08-2016, 03:17 PM

My '72 Chevy before I put the bumpers back on...bought it with the springs in it and I have no idea how much it's lowered.

1972 Chevrolet Suburban by FordTorino73, on Flickr

Lowered incorrectly in the rear only wth square tubing by previous owner...

72 gmc by FordTorino73, on Flickr

Average Joe · 01-09-2016, 02:17 PM

Here is mine. It has 1 coil cut in the front. Stock sb springs with cast iron headed big block in it= approx 4" front drop. Rear has 2600 bags on schraders with Scoti's shock bracket modification from faq. Approx. 5" drop. No c-notch.

3drburb · 01-09-2016, 04:22 PM

Quote:

Originally Posted by Average Joe

Here is mine. It has 1 coil cut in the front. Stock sb springs with cast iron headed big block in it= approx 4" front drop. Rear has 2600 bags on schraders with Scoti's shock bracket modification from faq. Approx. 5" drop. No c-notch.

I like your style, that looks very nice.
What size rallies and tires are you running with?
Thanks

Average Joe · 01-09-2016, 10:40 PM

Quote:

Originally Posted by 3drburb

I like your style, that looks very nice.
What size rallies and tires are you running with?
Thanks

Thank you! 15x8 6 lug rallys, 255/70/15 tires on all four. I would like to add a small spacer on the rear to match the front track.

04ls1gto · 11-22-2016, 10:16 PM

Quote:

Originally Posted by notagain

ECE 4/6 drop
Still lots of work to do.

Did you need c notch with 6" rear? Also what size tires are you running?

04ls1gto · 11-22-2016, 10:19 PM

Quote:

Originally Posted by notagain

This is my 69

Just awnsered my own question, how's the ride quality?

3drburb · 11-23-2016, 12:24 AM

Lower, since it was last posted in this thread 3 yrs ago.

Average Joe · 11-24-2016, 04:00 PM

Quote:

Originally Posted by 3drburb

Lower, since it was last posted in this thread 3 yrs ago.

Beautiful! Looks just right.

Salvaged · 11-24-2016, 05:48 PM

Here is mine. 72 3/4 ton on bags. Just finished the 24 v Cummins swap.
Posted via Mobile Device

nastety92 · 11-24-2016, 09:42 PM

Quote:

Originally Posted by Salvaged

Here is mine. 72 3/4 ton on bags. Just finished the 24 v Cummins swap.
Posted via Mobile Device

The truck looks great. I really like the black trim and black door handles. The front door vent window trim sticks out now being chrome.

How do you like the diesel swap so far? What transmission? Is the motor stock or modified?

Nick

Salvaged · 11-24-2016, 11:55 PM

Quote:

Originally Posted by nastety92

The truck looks great. I really like the black trim and black door handles. The front door vent window trim sticks out now being chrome.

How do you like the diesel swap so far? What transmission? Is the motor stock or modified?

Nick

Ya I still have some work to do. I'll fix the vent window trim when I get new seals.

I love the Cummins. Been averaging 22.5 mpg so far. It's got the 47RE that came with motor, all stock other than 4" exhaust and edge juice with CTS2 monitor. It's super loud in the cab tho
Posted via Mobile Device

11-26-2015, 10:23 PM	#127
timmyraines Registered User Join Date: Nov 2015 Location: Sarasota, FL Posts: 5	Re: How about some pics of lowered 2wd ff Last edited by timmyraines; 11-26-2015 at 10:43 PM.

12-05-2015, 04:51 PM	#128
Highlander Cycles Registered User Join Date: Oct 2014 Location: Las Vegas, Nevada Posts: 9	Re: How about some pics of lowered 2wd 2" 68 C20 Panel

12-06-2015, 10:48 PM	#129
gatch Registered User Join Date: May 2009 Location: dillonvale, ohio Posts: 35	Re: How about some pics of lowered 2wd 1972 static dropped with cpp 2.5 spindles, 3 inch front springs with 4.5 rear springs. 245/45/20s Attached Images

12-07-2015, 12:36 AM	#131
PHILLYDEAN Registered User Join Date: May 2015 Location: PUYALLUP,WA Posts: 39	Re: How about some pics of lowered 2wd I know it isn't lowered but I will be as soon as I figure out the air ride. __________________ ..........._____________ ........./______//__//__{\______ ,,,,,,,/__(O)__//__//___/__(O)_/ Freedom ain't free!

12-07-2015, 08:36 AM	#132
Daveiaff Registered User Join Date: Aug 2014 Location: jefferson hills, pa Posts: 85	Re: How about some pics of lowered 2wd Rally Wheels with spacers lower a arm rubbed at wheel weights, now has salt flats. Attached Images

12-07-2015, 08:41 AM	#133
Daveiaff Registered User Join Date: Aug 2014 Location: jefferson hills, pa Posts: 85	Re: How about some pics of lowered 2wd My parts suburban, not on bags but the trailer has air ride. This trailer was stolen south of Pittsburgh, PA if anyone has seen it? LOL Attached Images

12-07-2015, 08:58 AM	#134
Daveiaff Registered User Join Date: Aug 2014 Location: jefferson hills, pa Posts: 85	Re: How about some pics of lowered 2wd Burb in back with a Blazer door to suburban door window frame swap. The frame of my '67 step side - lowering the rear with a frame stack, adding fish plates today. Attached Images

12-23-2015, 03:16 AM	#135
Stained Soul Registered User Join Date: Nov 2013 Location: Spokane, Wa. Posts: 55	Re: How about some pics of lowered 2wd Here's mine. Not sure what the PO did for the drop. I put on the 18" tires/rims. Trying to decide on bagging the ol'girl

12-23-2015, 01:43 PM	#136
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,317	Re: How about some pics of lowered 2wd - I think my '67 Panel Truck is only lowered about 2 1/2 inches. The PO did it and I haven't really checked it out at this point. I wanted to wait until I had the LS1/4l60e installed to see where it was at..... I have about 2000 miles on it now so I can check it closer next Spring when I get it back out. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-08-2016, 03:17 PM	#137
Dburger Registered User Join Date: Apr 2013 Location: Columbia, SC Posts: 86	Re: How about some pics of lowered 2wd My '72 Chevy before I put the bumpers back on...bought it with the springs in it and I have no idea how much it's lowered. 1972 Chevrolet Suburban by FordTorino73, on Flickr Lowered incorrectly in the rear only wth square tubing by previous owner... 72 gmc by FordTorino73, on Flickr __________________ 1953 Suburban Carryall 3106, 1993 S10 4x4 ext cab 1958 Suburban Carryall 3116 ex school bus 1959 Apache 36, 1984 C30 3+3 DRW 6.2 4MT 1967 C10 fleetside LWB, 1969 Chevy Suburban C10 1972 GMC Suburban C10 1972 Chevy Suburban C10 clam shell/tailgate

01-09-2016, 02:17 PM	#138
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: How about some pics of lowered 2wd Here is mine. It has 1 coil cut in the front. Stock sb springs with cast iron headed big block in it= approx 4" front drop. Rear has 2600 bags on schraders with Scoti's shock bracket modification from faq. Approx. 5" drop. No c-notch. Attached Images __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

11-23-2016, 12:24 AM	#143
3drburb Registered User Join Date: Jul 2011 Location: Kent, WA. Posts: 834	Re: How about some pics of lowered 2wd Lower, since it was last posted in this thread 3 yrs ago. Attached Images

11-24-2016, 05:48 PM	#145
Salvaged Registered User Join Date: Nov 2016 Location: Dickinson ND Posts: 4	Here is mine. 72 3/4 ton on bags. Just finished the 24 v Cummins swap. Posted via Mobile Device Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.