Wood bed cross sill help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

novice · 11-20-2017, 09:56 AM

I found the brackets at classic industries.

Can anyone help on the spacing and if the reinforcement strips only attach to the wood and not the chassis?

Zeroman · 11-20-2017, 02:02 PM

For board spacing see GMC Pauls website....

http://gmcpauls.com/47-72_BedWood_Info.htm

The bed strips attach to the front bed panel and the bed cross sills, but not the rear cross sill.

Being a fleet side the wood attaches to the bed sides, your fender wells, and the two pieces with the offset washers attach to the frame.

11-20-2017, 09:56 AM	#1
novice Registered User Join Date: Dec 2013 Location: washington north carolina Posts: 123	Re: Wood bed cross sill help I found the brackets at classic industries. Can anyone help on the spacing and if the reinforcement strips only attach to the wood and not the chassis?

11-20-2017, 02:02 PM	#2
Zeroman Registered User Join Date: Mar 2013 Location: Houston, TX Posts: 348	Re: Wood bed cross sill help For board spacing see GMC Pauls website.... http://gmcpauls.com/47-72_BedWood_Info.htm The bed strips attach to the front bed panel and the bed cross sills, but not the rear cross sill. Being a fleet side the wood attaches to the bed sides, your fender wells, and the two pieces with the offset washers attach to the frame. Last edited by Zeroman; 11-20-2017 at 02:10 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.