SD Parting out 2005 Silverado

[mitch_04]

Hi all,
Recently came across a rolled 2005 Silverado that I snuck the engine, trans, and transfer case off of, as well as the radiator, fans, ac condenser, and wheels/tires. I figured I'd see if anyone needs anything off it. Interior is still good, as are the axles. Headlights, taillights, park lights, etc etc are still there. Just PM me or reply in this thread, I'll try to stay on top of it as best I can. Forum rules state a price is needed, but listing every single part available would be hard plus I'd still forget things people want. I'll say for $1500 you can have the whole pickup or make an offer on any parts you need. Located in Platte, SD 57369

Thanks!

[michael bustamante]

hows the driveshaft and xfer case crossmember?

[mitch_04]

Both are good, the vehicle drove just fine before I pulled the drivetrain. Measure your shafts and I'll double check that mine are the same.

[michael bustamante]

just need the rear. ill get you measurements tonight.

[mitch_04]

My driveshaft lengths are ~67 3/4 rear and ~29 5/8 front, measuring from center of u-joint cap to center of u-joint cap.

[michael bustamante]

its too long. crap.. ok man thanks anyways. can i get a pic of the xfer case crossmember?

[mitch_04]

Gone right now, I will take a picture as soon as I get back on Sunday.

[lolife99]

Does this truck have fog lamps under the front bumper?
If so I need a good complete wiring harness for them.

[mitch_04]

Yes it does. I believe it is part of the front lighting harness. Do you want the whole harness or do you want me to cut a chunk out?

[lolife99]

Originally Posted by mitch_04

Yes it does. I believe it is part of the front lighting harness. Do you want the whole harness or do you want me to cut a chunk out?

I would prefer to have an un-cut harness.
I thought it could be unplugged from the under hood fuse box.
Definitely interested.
Price shipped to 65251?

[mitch_04]

Pm sent!

[lolife99]

Originally Posted by mitch_04

Pm sent!

Didn't get your PM,...

[mitch_04]

Oops, check now!

[c1087]

Interested in the exterior driver side rear door handle. Condition? Price shipped to 17044? Thanks

[mitch_04]

Pm sent!

[lolife99]

Originally Posted by mitch_04

Yes it does. I believe it is part of the front lighting harness. Do you want the whole harness or do you want me to cut a chunk out?

Money sent for front lighting harness.
Thank you.

[mitch_04]

Thank you! Will ship tomorrow, as long as I can find a good box at the shop.

[mitch_04]

All PM's should be replied to, let me know I missed you!

[mitch_04]

I've been disassembling, here is some pictures of what's available. I haven't spent any time cleaning the parts, so if you are interested but want to see how it cleans up, let me know and I'll hook you up.

Transfer Case Module, Body Module, XM receiver w/antennae, CD player, air bags, steering wheel w/controls, steering column, floor mats, almost all plastic trim, HVAC box (dual zone), HVAC controls, 4x4 button, fog light button, instrument cluster, fuse block, junction block, trailer brake adapter, headlight switch, hood release w/latch, e-brake release, wiper arms, overhead cubby, door sills, entire dash harness, etc etc...

http://s160.photobucket.com/user/ant...muw56.jpg.html

[mitch_04]

[mitch_04]

[mitch_04]

Parts for power window conversion

[54Caddy]

How much for power window conversion stuff

[mitch_04]

$300+ shipping for regulator, motor, switch, panel, and door wiring, both sides. Also have power locks available if needed.

[truckdude239]

Picture 9f radio please