Project Physcobilly <shortbed build> - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 12-31-2009, 01:14 AM

sweet build dude! im 17.

what'd you use on your rear frame?

Chlsnk · 12-31-2009, 09:15 PM

Rustoleum gloss black with metal flake.Thin it out with lacqure thinner and not the mineral spirits they suggest . It sets up and becomes more durable and seems to have a higher shine .

Chlsnk · 04-29-2010, 11:00 PM

Well have done some updates on the truck. I have had the tranny rebuilt with the B&M race rebuild kit and stage 2 shift kit.
Gathered all the body pannels to swap over to a 76 front clip minus grill .

And the flip kit is installed waiting to get it back from the shop so I can lower the front!

*BGRAFX* · 04-29-2010, 11:40 PM

Congrats man can't wait to see it, I bet your glad you didn't sell the truck after the wreck

Chlsnk · 05-01-2010, 08:55 PM

The truck is sitting down at the tranny shop again they had me get my driveshaft shortened to much and now it wont seal and is pukin tranny fluid everywere this truck is turning into a money pit over $4,000 in it and I have nearly nothing to show for it. And now the tranny shop is ignoring all my calls for the last three days this blows.

*87 chevy silverado* · 05-05-2010, 06:13 PM

any pics?

Chlsnk · 05-09-2010, 11:39 PM

Took some pictures today ill try to get them posted tommorrow. All I did today was wash and vacume (sp?) the interior.

VA72C10 · 05-09-2010, 11:43 PM

so you got it back from the tranny shop I assume? Sorry to hear about the issues...

Chlsnk · 07-01-2010, 11:31 AM

Alright Here are some before and after pictures progress has been slowly made. Even though im really considdering selling her to buy a rust free 1952 plymouth Savoy.

I have the drop springs I just can't find anyone brave enough to show me how to put them on.

I used a western chassis flip kit and it is a great product! I would recomend it to anyone.

****edit****
Wow I just looked at the before and after picture and it just blows my mind how much it changed it hardly looks like the same truck! I must have been getting nosebleeds with how high it was sitting before the smaller wheels and flip kit.

*BGRAFX* · 07-01-2010, 11:39 AM

Looks really good. What happened to john deer black?

justpball · 07-01-2010, 11:45 AM

need a song of the day... I was listening to Colt Ford " Waffle House"... see what you think

YouTube- colt ford-waffle house

Chlsnk · 07-01-2010, 12:06 PM

A few more shots! I picked up the B&M shifter for $50 with cable and brackets. Painted my round headlight trim and a picture of the rallye wheels.

Chlsnk · 07-01-2010, 01:18 PM

The John Deere black is still in the works I need to find a paintbooth to use.

GMC Guy · 07-01-2010, 11:47 PM

uhhh.... what size tires you runnin in the front? truck is sure coming along nicely!

Chlsnk · 07-06-2010, 07:42 AM

I'm. Running some tiny 205/60-15 wish I had gone with a 75 series tire.

Chlsnk · 07-13-2010, 11:39 AM

Yesterday I met board member BGRAFX did some parts trading checked out his new burb its clean.

YouTube- Bobby Brown Goes Down

Later that night I was at a local vintage stock getting a movie and struck up a conversation with a guy turns out he is driving a 80's GMC shortbus across America from philly to SoCaL , but heres the kicker we go outside to look at his bus he tells me nice truck and with all honesty asks me if it has a HEMI.

but then again I guess not everyone is a truck guy.
Now I have two more truck rallys to mount my slicks on. Was able to get my CD player installed went really well no pictures of the install. The dash was already cut and all the wiring was in place so I didn't run into any problems.This player is 180w and seems like it really beats harder and the sound is better than the CD player that got stolen.

Also hit a pothole with one of my traction bars and it bent it. Really freaked me out when my trucks rearend felt like it polevaulted up.

Chlsnk · 07-13-2010, 11:43 AM

Quote:

Originally Posted by justpball

need a song of the day... I was listening to Colt Ford " Waffle House"... see what you think

YouTube- colt ford-waffle house

I dig that!

*BGRAFX* · 07-13-2010, 01:31 PM

Here's a couple more pix for ya...thanks for the headers man!

Chlsnk · 07-13-2010, 06:09 PM

Ya no problem if you cant get your bumber off with your hand tools you are free to come over and see if we couldnt get it off using my impact.

*BGRAFX* · 07-13-2010, 06:11 PM

I will be there in 10minutes. Jk

Chlsnk · 07-13-2010, 09:05 PM

Well I was just itching to do something so I filled up the paint gun and started to spray.

*BGRAFX* · 07-13-2010, 09:20 PM

Looks good!

glock35ipsc · 07-13-2010, 10:38 PM

Here's an appropriate song for ya. Truck is looking great too! Definitely like the new altitude.

YouTube- Reverend Horton Heat- Psychobilly...

SevenSeries · 07-14-2010, 03:45 AM

Wow man. When did you hit the pothole? And in your picture it shows the traction bar hanging. Is that from it hitting?

Chlsnk · 07-14-2010, 05:19 PM

Ya the picture of my truck with mikes burb you can see the bent and hanging traction bar. Damn Johnson county streets.

BTW the paint I used is some sort of epoxy paint AKA bridge paint.

12-31-2009, 01:14 AM	#26
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Project Physcobilly <shortbed build> sweet build dude! im 17. what'd you use on your rear frame? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

12-31-2009, 09:15 PM	#27
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> Rustoleum gloss black with metal flake.Thin it out with lacqure thinner and not the mineral spirits they suggest . It sets up and becomes more durable and seems to have a higher shine . __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

04-29-2010, 11:00 PM	#28
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> Well have done some updates on the truck. I have had the tranny rebuilt with the B&M race rebuild kit and stage 2 shift kit. Gathered all the body pannels to swap over to a 76 front clip minus grill . And the flip kit is installed waiting to get it back from the shop so I can lower the front! __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

04-29-2010, 11:40 PM	#29
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Project Physcobilly <shortbed build> Congrats man can't wait to see it, I bet your glad you didn't sell the truck after the wreck

05-01-2010, 08:55 PM	#30
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> The truck is sitting down at the tranny shop again they had me get my driveshaft shortened to much and now it wont seal and is pukin tranny fluid everywere this truck is turning into a money pit over $4,000 in it and I have nearly nothing to show for it. And now the tranny shop is ignoring all my calls for the last three days this blows. __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968 Last edited by Chlsnk; 05-01-2010 at 08:56 PM.

05-05-2010, 06:13 PM	#31
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: Project Physcobilly <shortbed build> any pics?

05-09-2010, 11:39 PM	#32
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> Took some pictures today ill try to get them posted tommorrow. All I did today was wash and vacume (sp?) the interior. __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

05-09-2010, 11:43 PM	#33
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project Physcobilly <shortbed build> so you got it back from the tranny shop I assume? Sorry to hear about the issues... __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-01-2010, 11:31 AM	#34
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> Alright Here are some before and after pictures progress has been slowly made. Even though im really considdering selling her to buy a rust free 1952 plymouth Savoy. I have the drop springs I just can't find anyone brave enough to show me how to put them on. I used a western chassis flip kit and it is a great product! I would recomend it to anyone. **edit Wow I just looked at the before and after picture and it just blows my mind how much it changed it hardly looks like the same truck! I must have been getting nosebleeds with how high it was sitting before the smaller wheels and flip kit. Attached Images __________________ My 84 short bed build up**** http://67-72chevytrucks.com/vboard/s...68#post3481968 Last edited by Chlsnk; 07-01-2010 at 11:35 AM.

07-01-2010, 11:39 AM	#35
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Project Physcobilly <shortbed build> Looks really good. What happened to john deer black?

07-01-2010, 12:06 PM	#37
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> A few more shots! I picked up the B&M shifter for $50 with cable and brackets. Painted my round headlight trim and a picture of the rallye wheels. Attached Images __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

07-01-2010, 01:18 PM	#38
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> The John Deere black is still in the works I need to find a paintbooth to use. __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

07-01-2010, 11:47 PM	#39
GMC Guy Registered User Join Date: May 2009 Location: Sparks, NV Posts: 913	Re: Project Physcobilly <shortbed build> uhhh.... what size tires you runnin in the front? truck is sure coming along nicely! __________________ Greg 1974 GMC 1/2 Ton SWB Fleetside L33 5.3/4l65e .................__ ............._____l __\__ ..............l_(O)_ l___(O)]

07-06-2010, 07:42 AM	#40
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> I'm. Running some tiny 205/60-15 wish I had gone with a 75 series tire. __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

07-13-2010, 01:31 PM	#43
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Project Physcobilly <shortbed build> Here's a couple more pix for ya...thanks for the headers man! Attached Images Last edited by BGRAFX; 07-13-2010 at 01:34 PM.



Register or Log In To remove these advertisements.

07-13-2010, 06:09 PM	#44
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> Ya no problem if you cant get your bumber off with your hand tools you are free to come over and see if we couldnt get it off using my impact. __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

07-13-2010, 06:11 PM	#45
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Project Physcobilly <shortbed build> I will be there in 10minutes. Jk

07-13-2010, 09:05 PM	#46
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> Well I was just itching to do something so I filled up the paint gun and started to spray. Attached Images __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

07-13-2010, 09:20 PM	#47
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Project Physcobilly <shortbed build> Looks good!

07-14-2010, 03:45 AM	#49
SevenSeries Registered User Join Date: Mar 2010 Location: California Posts: 147	Re: Project Physcobilly <shortbed build> Wow man. When did you hit the pothole? And in your picture it shows the traction bar hanging. Is that from it hitting? __________________ With enough time and money, you can do anything Quoted from my father 1976 C-10 Project

07-14-2010, 05:19 PM	#50
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: Project Physcobilly <shortbed build> Ya the picture of my truck with mikes burb you can see the bent and hanging traction bar. Damn Johnson county streets. BTW the paint I used is some sort of epoxy paint AKA bridge paint. Attached Images __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968 Last edited by Chlsnk; 07-14-2010 at 05:27 PM.

Register or Log In To remove these advertisements.