67-72 cab corner 6x9 speaker brackets

[bigblock73]

Thanks for the feedback Greg, glad you like them.

I really enjoy seeing the installs of these guys, so when you get them in, please post some pics.

[bigblock73]

TTT, have a few sets of each left.

[usmcchevy]

I'll take a set with holes. PM on the way.

[Hart_Rod]

Here's a few pictures of mine installed. I had to drill some wider spaced holes for the passenger's side lower adjustable bracket, but other than that everything installed fairly easily.

PS Should I drill a hole to allow air to escape from the back side????

[Dieselwrencher]

Jeff, I sent payment tonight for a set with holes. Thanks again, Ryan.

[bigblock73]

Rob, your install looks great! You wouldn't have any pics showing the modification to the lower bracket would you? I am surprised one side had to be modified and not the other, all four brackets are the same, 2 bent one way 2 bent the other.

As far as ventilation, I am not sure. If anyone can chime in I would appreciate it. If I need t provide baffles, so be it...I will do that. I would just like to know. I do know these are not air tight, but kind of close.

Thank you for the pictures and feedback once again.

[bigblock73]

Originally Posted by Dieselwrencher

Jeff, I sent payment tonight for a set with holes. Thanks again, Ryan.

Thanks Ryan, just came in from bending and boxing yours...they will be in tomorrows mail.

[longbed67]

No need to put relief holes in, actually the tighter you can seal them to prevent any air from going in or out, the better as you will get better sound quality and volume out of them.

[74baggedbug]

Any with holes still available? Thanks
Posted via Mobile Device

[Dieselwrencher]

Originally Posted by bigblock73

Thanks Ryan, just came in from bending and boxing yours...they will be in tomorrows mail.

Jeff, thanks. You could have taken the day off though man.

[bigblock73]

Originally Posted by 74baggedbug

Any with holes still available? Thanks
Posted via Mobile Device

Yessir, have about 6 left or so. PM sent.

[bigblock73]

Originally Posted by Dieselwrencher

Jeff, thanks. You could have taken the day off though man.

I took off the whole week...your brackets will be there in a few days.

Thanks again!

[Hart_Rod]

Originally Posted by bigblock73

Rob, your install looks great! You wouldn't have any pics showing the modification to the lower bracket would you? I am surprised one side had to be modified and not the other, all four brackets are the same, 2 bent one way 2 bent the other.

As far as ventilation, I am not sure. If anyone can chime in I would appreciate it. If I need t provide baffles, so be it...I will do that. I would just like to know. I do know these are not air tight, but kind of close.

Thank you for the pictures and feedback once again.

Tom - There's an deep indention in the floor pan on the passengers side that kept me from using the original two vertical holes. I think it's the storage location for the jack. All I had to do was to move those two vertical holes out about 3/4" so I could catch the flat part of the floor. Here's a some pictures of the indention.

[bigblock73]

Thanks for the pictures. Let me make sure I understand what you had to do...

On the "L" bracket, the one that mounts to the floor. You had to move both floor mounting holes out 3/4" per side on only the passenger side...correct? The slotted holes on the "L" bracket were fine, as were the corresponding holes on the speaker bracket itself right?

Thanks for the feedback, I will update the next batch I make to reflect this. I am glad this is an easy fix and doesn't affect the overall install, or so it seems.

[Hart_Rod]

Originally Posted by bigblock73

Thanks for the pictures. Let me make sure I understand what you had to do...

On the "L" bracket, the one that mounts to the floor. You had to move both floor mounting holes out 3/4" per side on only the passenger side...correct? The slotted holes on the "L" bracket were fine, as were the corresponding holes on the speaker bracket itself right?

Thanks for the feedback, I will update the next batch I make to reflect this. I am glad this is an easy fix and doesn't affect the overall install, or so it seems.

Yes....
Posted via Mobile Device

[bigblock73]

TTT, still have some brackets

[Camaro_nut2001]

Hello feller, do you have a set with no holes? If so, what's the total shipped to 37806? I have a PayPal account if you want to PM me your info. These look sooo nice!!!

[bigblock73]

Yes I do, and PM sent

[RocketKing]

Do you have another set with no holes? Price to 72616.

Thanks

[bigblock73]

Originally Posted by RocketKing

Do you have another set with no holes? Price to 72616.

Thanks

Ye I do, PM sent.

[bigblock73]

TTT, have a handful of brackets left with holes and no holes, boxed and ready to ship.

[425HP409]

I will take two sets with holes.
Charles

[bigblock73]

PM sent Charles

[weircc]

do you still have a set left ill take a set for 65 just give me paypal info thanks

[bigblock73]

Originally Posted by weircc

do you still have a set left ill take a set for 65 just give me paypal info thanks

PM sent