Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-17-2020, 06:34 PM | #26 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: Distributor won't sit down all the way on my 327
Agree with this....one geezer to another Just a thought or 2....the dot on the gear, needs to be on line with the rotor pointer, or you be out of phase. The other thought, would be as mentoined farther above....you might take a big screw driver, & tap on the pump driver, to be sure that it is seated? If you missed the slot/tang, that dist will be at least 1/2 inch up longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
01-17-2020, 10:15 PM | #27 |
Registered User
Join Date: Jan 2010
Location: Here
Posts: 5,420
|
Re: Distributor won't sit down all the way on my 327
I got it down. The shaft must not have seated at the oil pump. I took a long screwdriver and just tapped it and the shaft went down a little and now the distributor sits as it should. 1 problem down. I changed my dizzy gear to a melonized one and the one I put on does not have the dimple on it. How do I make sure it's on correctly without the dimple?
|
01-17-2020, 10:33 PM | #28 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Distributor won't sit down all the way on my 327
I don't see how the position of the distributor gear on the distributor shaft has anything to do with the rotor being out of phase?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
01-17-2020, 10:42 PM | #29 |
Registered User
Join Date: Jan 2010
Location: Here
Posts: 5,420
|
Re: Distributor won't sit down all the way on my 327
Found the info on it!
|
01-18-2020, 08:03 AM | #30 |
Registered User
Join Date: Oct 2013
Location: Maine
Posts: 2,340
|
Re: Distributor won't sit down all the way on my 327
Well I'll be darned, still learning new stuff about small block chevys
__________________
76 Chevy K20 76 GMC K15 77 Chevy C10 77 Chevy K10 |
01-18-2020, 10:48 PM | #31 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Distributor won't sit down all the way on my 327
Me too.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
01-19-2020, 11:43 AM | #32 | |
Registered User
Join Date: May 2016
Location: Henderson NC
Posts: 975
|
Re: Distributor won't sit down all the way on my 327
Quote:
|
|
01-19-2020, 11:45 AM | #33 |
Registered User
Join Date: Jan 2010
Location: Here
Posts: 5,420
|
Re: Distributor won't sit down all the way on my 327
Yes. This is the cam used. https://www.summitracing.com/parts/cca-12-411-8/
Last edited by chewychevy67; 01-19-2020 at 12:11 PM. |
Bookmarks |
|
|