The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-15-2022, 09:14 AM   #1
Alloyvert
Active Member
 
Join Date: Nov 2019
Location: SE WI
Posts: 125
64 Deluxe steering wheel help

I recently picked up a deluxe steering wheel that was missing the horn hardware, which I acquired separately. Everything appears correct except the plastic retainer as the 3 raised areas are too tall and the horn assembly flops around. It appears these retainers are color coded and I have 2 different versions now... the red one in the picture (which is too tall) and a white/clearish one (which is too short).

As a reference I have the same wheel outlined in this thread that I followed for assembly. http://67-72chevytrucks.com/vboard/s...d.php?t=637192

I could really use height of the correct retainer so I can either find the right one or simply modify the tall/red one. Thanks!!
Attached Images
 
Alloyvert is offline   Reply With Quote
Old 07-15-2022, 11:36 AM   #2
The Rocknrod
Moderator

 
The Rocknrod's Avatar
 
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
Re: 64 Deluxe steering wheel help

I didn't know they were color coded. Looks like in that thread he used a different color. Not sure what the correct height is.
The Rocknrod is offline   Reply With Quote
Old 07-16-2022, 10:27 AM   #3
60-66
Registered User

 
60-66's Avatar
 
Join Date: Apr 2012
Location: Wisconsin
Posts: 3,329
Re: 64 Deluxe steering wheel help

I cant tell you right off hand how tall it is but the GM Part number is 764761 for our trucks 1961-1965 and 1966 on the custom steering wheels . If you scroll down theres a picture on the second line here. https://gmtiltcolumns.com/coming-soon-4/ . Fits many other Chevy applications on deluxe wheel only
__________________
IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778
The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839
WANTED : 1963-1966 6 Cylinder Fan Shroud
WANTED :1964-1966 PANEL TRUCK
60-66 is offline   Reply With Quote
Old 07-16-2022, 11:43 AM   #4
Alloyvert
Active Member
 
Join Date: Nov 2019
Location: SE WI
Posts: 125
Re: 64 Deluxe steering wheel help

Thanks as the p/n is very helpful!
Alloyvert is offline   Reply With Quote
Old 07-24-2022, 08:58 AM   #5
Alloyvert
Active Member
 
Join Date: Nov 2019
Location: SE WI
Posts: 125
Re: 64 Deluxe steering wheel help

I located and ordered p/n 764761 and it is the same height as the red one in my first post. So nothing has changed as the horn assembly is still very loose/floppy. It almost seems like I am missing something, but it is assembled identical to the thread I posted.

Any recommendations??
Alloyvert is offline   Reply With Quote
Old 07-24-2022, 01:34 PM   #6
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,486
Re: 64 Deluxe steering wheel help

Did you try flipping the metal piece over to see if that changed anything with the sloppiness?
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 07-25-2022, 12:04 PM   #7
Alloyvert
Active Member
 
Join Date: Nov 2019
Location: SE WI
Posts: 125
Re: 64 Deluxe steering wheel help

I followed the install process from the link in my first thread for part orientation and order in which the metal piece was installed with the tabs facing up (away from the wheel), which I assume is needed to align the flat plastic spacer with correlating notches. I tried flipping it and the horn ring was very rigid with zero ability to move.

How does this horn ring actually work as it seems like there should be some type of spring to hold it stable until pressure is applied.
Alloyvert is offline   Reply With Quote
Old 07-25-2022, 01:34 PM   #8
val1gonzales
Registered User
 
Join Date: Apr 2019
Location: San Antonio
Posts: 123
Re: 64 Deluxe steering wheel help

https://www.youtube.com/watch?v=9502lKjsKoo
val1gonzales is offline   Reply With Quote
Old 12-07-2022, 05:38 PM   #9
Alloyvert
Active Member
 
Join Date: Nov 2019
Location: SE WI
Posts: 125
Re: 64 Deluxe steering wheel help

Getting back after this issue as I still have not solved the problem and tried several isolators including the one recommended by 60-66 (764761). Any other suggestions?
Alloyvert is offline   Reply With Quote
Old 12-07-2022, 05:57 PM   #10
bhap
Senior Member
 
bhap's Avatar
 
Join Date: Mar 2006
Location: Pittsburgh, PA
Posts: 264
Re: 64 Deluxe steering wheel help

This link shows assembly order.

http://www.6066chevytrucks.com/id108.html
bhap is offline   Reply With Quote
Old 12-07-2022, 06:20 PM   #11
Arne
Registered User
 
Arne's Avatar
 
Join Date: Sep 2022
Location: Eugene, OR
Posts: 490
Re: 64 Deluxe steering wheel help

My truck's translucent white one is just a hair over シ" tall.

Name:  IMG_4446.jpg
Views: 258
Size:  31.2 KB
__________________
.
- Arne
Finished Project - 1964 C10 Stepside, mild restomod

覧覧覧覧覧覧
Arne is offline   Reply With Quote
Old 12-07-2022, 06:59 PM   #12
Alloyvert
Active Member
 
Join Date: Nov 2019
Location: SE WI
Posts: 125
Re: 64 Deluxe steering wheel help

Thanks Arne. I think you may a different steering wheel as a 1/4 inch spacer is way too short for my deluxe wheel. For clarification, here's a photo of my wheel and I could use the height measurements for both plastic isolators for this specific wheel.

Thanks!
Attached Images
  

Last edited by Alloyvert; 12-07-2022 at 07:04 PM.
Alloyvert is offline   Reply With Quote
Old 12-07-2022, 07:15 PM   #13
Arne
Registered User
 
Arne's Avatar
 
Join Date: Sep 2022
Location: Eugene, OR
Posts: 490
Re: 64 Deluxe steering wheel help

Ahh, my bad. I wasn't aware of the difference, and since no measurements have been posted so far, thought I'd throw out a data point. Not helpful, I now see.

Have you considered milling the too-tall red one down a bit?
__________________
.
- Arne
Finished Project - 1964 C10 Stepside, mild restomod

覧覧覧覧覧覧
Arne is offline   Reply With Quote
Old 12-07-2022, 07:23 PM   #14
Alloyvert
Active Member
 
Join Date: Nov 2019
Location: SE WI
Posts: 125
Re: 64 Deluxe steering wheel help

Yep as I have 2 and already tried that with the crappy one that came with the kit from Classic Trucks which was also the wrong size. But it would be nice to start with the correct height as a target instead guessing. I also have a 3D printer and could print as well once I get the correct measurement.
Alloyvert is offline   Reply With Quote
Old 12-07-2022, 09:44 PM   #15
Alloyvert
Active Member
 
Join Date: Nov 2019
Location: SE WI
Posts: 125
Re: 64 Deluxe steering wheel help

Ok, problem solved. I took some measurements with a micrometer and drew up a single stand off to print that turned out to be spot on. So I printed 2 more and the horn works perfect now. No fancy connecting ring as my CAD skills are basic at best, but it works and one less thing to address.

The difference was fairly small, but obviously enough to not allow the horn assembly to tighten. Not sure why I did not think of this before, but very frustrating that even the kit from Classic Truck was incorrect. Now I may even tackle a basic restoration to the wheel itself.
Attached Images
  

Last edited by Alloyvert; 12-07-2022 at 10:13 PM.
Alloyvert is offline   Reply With Quote
Old 11-22-2024, 10:04 AM   #16
1964SS
Registered User
 
Join Date: Nov 2020
Location: Gardendale Alabama
Posts: 8
Re: 64 Deluxe steering wheel help

I have assembled my steering wheel per the same steps as you. My horn ring is now stiff/rigid with zero flexibility. Therefore, the horn ring is not loose or spongey enough to be capable of tapping the horn for it to work. Any help would be appreciated. My truck is a 1964 Step with the deluxe steering wheel just like the pictures above. Thanks for your time.
1964SS is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:40 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com