Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-07-2013, 05:49 PM | #26 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
got the frame and bed parts home. will need tailgate, lights and wiring to complete bed. steel floor and coupler to complete frame. pics to come
Posted via Mobile Device
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
04-07-2013, 06:46 PM | #27 |
Check The Champ, Demonstrator
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 60-66 Trailer made from a 60-66 bed
When placing your load in the trailer, the trailer manufacturers require 60% of the load over the front section of the center of the axle. You also have to keep in mind the tongue load, generally in the 200lb. range for pickup range. You'll see these types of specs stamped into the step bumpers or on the receiver units bolted to the frame. I don't think you'd be loading your new trailer to max capacity. More so than axle capacities, tire specs are important here. Were not allowed to use passenger type tires on a trailer and the tire stores are not allowed to sell or install a passenger type tire onto a rim KNOWN to be installed on a trailer. Trailer tires have different ply styles to allow the tread to twist. There are trailer tire ratings with letters that will indicate their capacity. Trailer tires are available in Bias Ply and Radials. Generally a trailer radial will start with an ST then the tire size.
I've found that a Bias Ply tire will hold more load and remain stable, but they bounce along the road when unloaded. Radials run smooth behind the tow vehicle. Of course you have to get stopped by an officer for these rules to apply and that will happen if you ever have an accident involving your trailer. There is a Grandfather clause to the rules here if the trailer was built years ago before the new rules came into play. However there's no Grandfather clause for commercial trailers. Not trying to hijack your thread, perhaps you might want to ask your local DOT before you go to far. You are allowed to build your own trailer here with a 1000lb capacity, but it cannot be used commercially. Tail lights, clearance lights and reflectors may be required when you go for licensing unless you have a trailer plate already. Trailer registration here have the color and number of axles and tire specs indicated. we have 6 single axles trailers in the family and two dual axle trailers to which we swap plates between. Dad has been stopped once in all his life for the trailer and they never enforced anything.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
04-07-2013, 07:23 PM | #28 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
an engine or a load of wood would be about the max weight id use it for.
Posted via Mobile Device
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
04-07-2013, 09:03 PM | #29 |
Registered User
Join Date: Jan 2013
Location: Columbia, SC
Posts: 1,927
|
Re: 60-66 Trailer made from a 60-66 bed
I saw this one at the Charlotte Auto Fair yesterday.
__________________
My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild. |
04-07-2013, 09:23 PM | #30 |
Hollister, CA.
Join Date: Sep 2006
Location: Hollister, Ca.
Posts: 6,150
|
Re: 60-66 Trailer made from a 60-66 bed
Yes ....
__________________
John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" |
04-07-2013, 10:37 PM | #31 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
looks great, really like the patina
Posted via Mobile Device
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
04-08-2013, 12:23 AM | #32 |
Registered User
Join Date: Feb 2013
Location: Boulder City NV
Posts: 214
|
Re: 60-66 Trailer made from a 60-66 bed
I went on a drive down route 66 in Northern AZ this weekend and I must have seen a dozen of these. 5 or 6 60-66 style, at least one for sure short bed, and 2 or 3 67-72 style.
I also found a 64-66 bbw shortbed that I will be trying to buy soon! Posted via Mobile Device |
04-08-2013, 08:47 AM | #33 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
Heres a few pics, more to come.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
04-08-2013, 09:58 AM | #34 |
Account Suspended
Join Date: Oct 2012
Location: here
Posts: 2,408
|
Re: 60-66 Trailer made from a 60-66 bed
I think you have a problem. The bed is channeled a bit low over the frame and appears to be dragging on the ground. It'll be easy to load but hard to tow!
|
04-08-2013, 10:09 AM | #35 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
haha...yeah right. Although I like alot of the bumper draggers, they are not for me.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
04-08-2013, 10:16 AM | #36 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,545
|
Re: 60-66 Trailer made from a 60-66 bed
just a question but would it be a good idea to spray CLR or something like that on a frame to "clean it up" a bit before you spray chassis black or POR15 on it?
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
04-08-2013, 04:23 PM | #37 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
Clyde.....I plan to redo the frame while its disassembled. Clean it up, POR, new wiring, etc...alot of the parts I already have. New tail lights, pig tails....found some stuff last night while doing some digging. Tailgate, rear bumper and rear bumper mounts the 3 big ones to get. The shocks I will take from the 63 as I have new ones to install.
Do have a question as to the rear springs we installed. Moog variable rates....Moog shows them sitting as I have them installed, tight coils up. I have seen them installed both ways and have heard that it doesn't make a difference w/variable rate springs. Can anybody shed some light on this?
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer Last edited by 1963c-10; 04-08-2013 at 04:33 PM. |
04-08-2013, 05:18 PM | #38 |
Registered User
Join Date: Feb 2013
Location: Boulder City NV
Posts: 214
|
Re: 60-66 Trailer made from a 60-66 bed
I would mount them however they physically fit the mounts best.
I am new to these rigs but I have some experience with coil springs(I'm a Jeep geek). The softer part of the spring(the tightly wound part) compresses faster whether it is toward the top or the bottom. Even though it is coiled tighter it is also a thinner diameter so it compresses easier. They don't last real long on Jeeps that are rock crawled. Possibly because we cycle them farther and more than regular use. Posted via Mobile Device |
04-08-2013, 06:19 PM | #39 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
Thanks Tommy, thats what I thought too. I have them mounted as the Moog picture shows above. The direction's didn't say either. I think that they are correct as thet are and will leave them that way.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
05-24-2013, 03:29 PM | #40 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
TTT....had a few people inquire about this
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
11-05-2013, 02:44 AM | #41 |
But Found Her 25yrs Later!
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,530
|
Re: 60-66 Trailer made from a 60-66 bed
Any progress?
__________________
I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 |
11-05-2013, 09:23 AM | #42 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
No, well, yes. I have gotten a rear bed panel and just got a great tailgate from perro13. Down to bumper brackets, rock guards and a bumper, then its bolts and I'll have all the parts needed. I have done some prep work to the frame, but have not painted it yet. I have new shocks for the 63, so I'll just take the used ones off for the trailer.
Theres a local guy who drives a 66 service truck and does welding. I plan to have him come over and do the welding work for me. My goal is to be done and painted by Jan 1.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
11-05-2013, 03:11 PM | #43 |
Registered User
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
|
Re: 60-66 Trailer made from a 60-66 bed
one thing i would do is get rid of the "rear/differential" axle and go with a straight axle (find a trailer with round tube and 6 lug) or you can get the hubs and spindles ... http://www.etrailer.com/Trailer-Hubs...-213-5UC1.html .. ( the spindles that fit are on the same page in what people bought with the hubs) and build your own to fit with 6 lug to match your truck (assume its still 6 lug) some states do NOT allow rear axles to be used one reason is that no one keeps up with the oil level in the diff. and the next thing you know things tend to lockup... the other thing you want is the tongue as long as possible/feasible the longer the tongue the easier it is to backup and the better it follows
|
11-05-2013, 09:14 PM | #44 |
Check The Champ, Demonstrator
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: 60-66 Trailer made from a 60-66 bed
A lot less drag as well. Sell off the rear axle to help fray the costs of the straight axle, 6 lug. There's so many options when it comes to trailer axles.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
11-05-2013, 10:08 PM | #45 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
im considering rebuilding the rearend and installing the factory posi unit i have thats sitting here rebuilt. then just swapping it out and putting it in my 63. still 17 spline, but it would upgrade to bolted on backing plates if i decided to go to rear disk in the future
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
11-05-2013, 10:09 PM | #46 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
gives me an extra set of axles at the least. the 17 spline are getting harder to find
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
11-05-2013, 11:57 PM | #47 |
Registered User
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
|
Re: 60-66 Trailer made from a 60-66 bed
there is another reason to put in a straight axle you don't waste a good set of 17 splines
|
11-06-2013, 09:32 AM | #48 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 60-66 Trailer made from a 60-66 bed
Very true..
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
11-07-2013, 01:13 AM | #49 |
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: 60-66 Trailer made from a 60-66 bed
I had a long bed fleet side trailer made from a 60 chevy bed. OEM axle underneath that was gutted and had 3/4 ton coils. I sold it though. Don't really wish I still had it cause I didn't need it....but sometimes I wish I still did!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
11-07-2013, 01:31 AM | #50 |
Registered User
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
|
Re: 60-66 Trailer made from a 60-66 bed
i have a 3/4 73 crew cab frame (nice long tongue) with a utility box on it and i put soft plugs in the axle tube ends cut the axle shafts off just had the flange used them for bearing caps packed the wheel bearings ( 3/4 ton axles are great for trailer as they are full floater ) pulled the ring and pinion out put rear cover back on and made a plate to cover the pinion hole put surge brake hitch on it used the original 13" brakes came out very nice
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|