The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-07-2024, 10:53 PM   #1
Gumby83
Registered User
 
Join Date: Aug 2021
Location: Armstrong BC
Posts: 52
Power Steering help.

Hey fellas, i have a 65 C10, PO put power steering on the truck, which is hooked up to a reman LS power steering pump. That pump feeds my Hydraulic brake booster then goes down to the power steering box. The steering is heavy and slow, makes drifting impossible. I cannot palm the wheel due to the weight.

Looking for recommendations on what i should do to hopefully acheive very light steering.... i get into a modern vehicle and the difference is day and night, i really want to keep my stock crossmember (Motor mounts welded to the crossmember and frame, as well as the crossmember having CPP lower control arms on air bags etc etc) but this is a safey concern for me, as if the truck steps out of line in a corner, its a real struggle to input steering corrections.

Heres a burnout for the other adult children in here https://www.youtube.com/watch?v=sP6W2RPgaiw
Gumby83 is offline   Reply With Quote
Old 11-08-2024, 01:07 PM   #2
bigmoe
Registered User
 
bigmoe's Avatar
 
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 990
Re: Power Steering help.

You may want one of these? Cheaper than a rack and pinion conversion.
Attached Images
 
bigmoe is offline   Reply With Quote
Old 11-09-2024, 11:17 AM   #3
_mg
Active Member
 
_mg's Avatar
 
Join Date: Jul 2013
Location: Southeast MI
Posts: 195
Re: Power Steering help.

Quote:
Originally Posted by Gumby83 View Post
Heres a burnout for the other adult children in here https://www.youtube.com/watch?v=sP6W2RPgaiw
Great burnout, adult child giggle giggle.
_mg is offline   Reply With Quote
Old 11-09-2024, 03:29 PM   #4
Gumby83
Registered User
 
Join Date: Aug 2021
Location: Armstrong BC
Posts: 52
Re: Power Steering help.

Quote:
Originally Posted by bigmoe View Post
You may want one of these? Cheaper than a rack and pinion conversion.
Wouldnt do, steering is too slow i had another guy suggest i swap to a 12:1 steering box with the thinnest T-bar i can for super light steering. I am going to try that first before i get crazy and start looking into retrofitting a rack and pinion.
Gumby83 is offline   Reply With Quote
Old 11-09-2024, 04:31 PM   #5
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,841
Re: Power Steering help.

I suggest post pictures of your steering setup, including the center link, steering gear, and tie rods. Somebody here may spot something that can be corrected.
dmjlambert is offline   Reply With Quote
Old 11-09-2024, 05:56 PM   #6
Gumby83
Registered User
 
Join Date: Aug 2021
Location: Armstrong BC
Posts: 52
Re: Power Steering help.

Quote:
Originally Posted by dmjlambert View Post
I suggest post pictures of your steering setup, including the center link, steering gear, and tie rods. Somebody here may spot something that can be corrected.
good call, i think in 2-4 days ill have the truck back to the shop and ill start tearing into it for the winter. I can snap some pics while i start disassembling everything.
Gumby83 is offline   Reply With Quote
Old 11-09-2024, 06:52 PM   #7
bhap
Senior Member
 
bhap's Avatar
 
Join Date: Mar 2006
Location: Pittsburgh, PA
Posts: 264
Re: Power Steering help.

I looked into hydroboost a while ago and recall there were a couple of different ways to plumb it. Don’t know if it is dependent on the type of pump used or ? Have also seen where two pumps are used.

Last edited by bhap; 11-09-2024 at 06:57 PM.
bhap is offline   Reply With Quote
Old 11-10-2024, 04:10 AM   #8
Gumby83
Registered User
 
Join Date: Aug 2021
Location: Armstrong BC
Posts: 52
Re: Power Steering help.

Quote:
Originally Posted by bhap View Post
I looked into hydroboost a while ago and recall there were a couple of different ways to plumb it. Don’t know if it is dependent on the type of pump used or ? Have also seen where two pumps are used.
I thought about going from steering gear to the hydroboost, but thr booster has a high pressure bypass for the rack so i dont think it will work.i am probably going to throw a power steering cooler on and reduce the pulley size for more pressure.
Gumby83 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com