Canada WTB single add on water pump pulley SWP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aerotruk63** · 06-16-2018, 09:49 AM

**Ironhorse** · 06-16-2018, 12:39 PM

Will check my parts stash later today and get back with you. May have one, not sure if sold it at last swap meet. If I have one, will take pics of what I have to be sure we're on the same page.

**aerotruk63** · 06-16-2018, 01:55 PM

Well thats my problem .1000's of pages of literature and no picture. Seems to fit over a double groove pulley.

**Ironhorse** · 06-16-2018, 02:30 PM

Sorry, I'm no help either. Have one add on lower crank single groove pulley and a single groove water pump pulley. Not much help to you there, good luck in your search.

**aerotruk63** · 06-16-2018, 04:19 PM

Thank you for looking

**Captainfab** · 06-16-2018, 11:17 PM

Is the pulley you are needing, the one to drive the power steering pump?

**aerotruk63** · 06-17-2018, 06:31 AM

According to the installation sheet this single add on pulley is for the same belt to drive the A/C compressor.

**aerotruk63** · 06-17-2018, 08:50 PM

https://picasaweb.google.com/1138407...68211846634226

**Captainfab** · 06-17-2018, 11:45 PM

In my experience with the short water pump on a small block, the groove closest to the balancer is for the water pump and alternator. The second groove out, I always assumed was for A/C using a 2 groove WP pulley. The third groove out is for the power steering pump with a single groove pulley. I'm not saying your illustration is wrong or there isn't another configuration. This is just my experience. Are you needing a total of 3 or 4 grooves on the crank?

**aerotruk63** · 06-18-2018, 05:49 AM

I'm trying to work off the instruction sheet. I have tbe double altenator , double power steering , double crank + single , just needing the single add on for the water pump as I have a double presently.

**Captainfab** · 06-19-2018, 12:04 AM

OK, now I see what you are doing. I misunderstood originally. Is the add on pulley the same diameter as the 2 groove WP pulley?

**aerotruk63** · 06-19-2018, 06:17 AM

I would assume it is. Saw some add on pulleys in a yard yesterday with a square nose instead of tapered like in the picture. They were smaller diameter. Gonna measure mine to compare.

**aerotruk63** · 06-19-2018, 12:07 PM

1 1/2 inch inner depth
7 1/8 inch outside diameter

**60-66** · 06-19-2018, 05:38 PM

Heres what it looks like on a 1964. Many Truck pulleys for AIR and PS are truck Only pulleys , not always the same as cars. This add on pulley was used on 1958-1961 passenger cars= Impalas with Cool Pack units and 1963-1966 Truck dealer installed air. The GM part number is 3779582.

**60-66** · 06-19-2018, 05:38 PM

Heres the two pulleys

**60-66** · 06-19-2018, 05:40 PM

Then heres what is used if installed at the factory 1965 and 1966 with cast iron water pump pulley

**aerotruk63** · 06-19-2018, 07:15 PM

thank you Jon, been looking through the parts books unsuccessfully today trying to find that number. So far my pulley purchases are plenty and no result yet. lol

**aerotruk63** · 06-19-2018, 08:39 PM

Quote:

Originally Posted by 60-66

Heres what it looks like on a 1964. Many Truck pulleys for AIR and PS are truck Only pulleys , not always the same as cars. This add on pulley was used on 1958-1961 passenger cars= Impalas with Cool Pack units and 1963-1966 Truck dealer installed air. The GM part number is 3779582.

So in the 63 Installation Manual the A/C belt is completely towards the fan like in your pictures except it has 2 drive belts for the alternator and power steering pump closest to the crank , water pump. The Power Steering pulley I bought is in line with the add on pulley and middle groove on the rest.

**aerotruk63** · 06-19-2018, 08:41 PM

By the way Jon , I got to meet Roland. Nice guy , speaks fondly of you.

**aerotruk63** · 06-21-2018, 05:51 AM

Sourced the pulley with the part number out of Tulsa Oklahoma. It's on it's way. I'm off to Texas.

**pimpston65** · 06-21-2018, 07:15 AM

got time for texas but not Detroit, I see how you are...

**aerotruk63** · 06-21-2018, 07:27 AM

I should have brought you sanitary napkins. Roll a Depends instead. Lol

**pimpston65** · 06-21-2018, 10:14 AM

there called adult under garments and i change mine daily, enjoy ur trip!!

**60-66** · 06-21-2018, 10:56 AM

Quote:

Originally Posted by aerotruk63

By the way Jon , I got to meet Roland. Nice guy , speaks fondly of you.

Why yes he is ! Hes on here once in awhile I think .Glad you found your pulley !

06-16-2018, 09:49 AM	#1
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	WTB single add on water pump pulley SWP __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-16-2018, 12:39 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,009	Re: WTB single add on water pump pulley SWP Will check my parts stash later today and get back with you. May have one, not sure if sold it at last swap meet. If I have one, will take pics of what I have to be sure we're on the same page. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

06-16-2018, 01:55 PM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP Well thats my problem .1000's of pages of literature and no picture. Seems to fit over a double groove pulley. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-16-2018, 02:30 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,009	Re: WTB single add on water pump pulley SWP Sorry, I'm no help either. Have one add on lower crank single groove pulley and a single groove water pump pulley. Not much help to you there, good luck in your search. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

06-16-2018, 04:19 PM	#5
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP Thank you for looking __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-16-2018, 11:17 PM	#6
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: WTB single add on water pump pulley SWP Is the pulley you are needing, the one to drive the power steering pump? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-17-2018, 06:31 AM	#7
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP According to the installation sheet this single add on pulley is for the same belt to drive the A/C compressor. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-17-2018, 08:50 PM	#8
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP https://picasaweb.google.com/1138407...68211846634226 __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-17-2018, 11:45 PM	#9
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: WTB single add on water pump pulley SWP In my experience with the short water pump on a small block, the groove closest to the balancer is for the water pump and alternator. The second groove out, I always assumed was for A/C using a 2 groove WP pulley. The third groove out is for the power steering pump with a single groove pulley. I'm not saying your illustration is wrong or there isn't another configuration. This is just my experience. Are you needing a total of 3 or 4 grooves on the crank? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-18-2018, 05:49 AM	#10
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP I'm trying to work off the instruction sheet. I have tbe double altenator , double power steering , double crank + single , just needing the single add on for the water pump as I have a double presently. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-19-2018, 12:04 AM	#11
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: WTB single add on water pump pulley SWP OK, now I see what you are doing. I misunderstood originally. Is the add on pulley the same diameter as the 2 groove WP pulley? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-19-2018, 06:17 AM	#12
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP I would assume it is. Saw some add on pulleys in a yard yesterday with a square nose instead of tapered like in the picture. They were smaller diameter. Gonna measure mine to compare. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-19-2018, 12:07 PM	#13
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP 1 1/2 inch inner depth 7 1/8 inch outside diameter __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-19-2018, 05:38 PM	#14
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,322	Re: WTB single add on water pump pulley SWP Heres what it looks like on a 1964. Many Truck pulleys for AIR and PS are truck Only pulleys , not always the same as cars. This add on pulley was used on 1958-1961 passenger cars= Impalas with Cool Pack units and 1963-1966 Truck dealer installed air. The GM part number is 3779582. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK Last edited by 60-66; 06-19-2018 at 06:10 PM.

06-19-2018, 05:40 PM	#16
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,322	Re: WTB single add on water pump pulley SWP Then heres what is used if installed at the factory 1965 and 1966 with cast iron water pump pulley __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK



Register or Log In To remove these advertisements.

06-19-2018, 07:15 PM	#17
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP thank you Jon, been looking through the parts books unsuccessfully today trying to find that number. So far my pulley purchases are plenty and no result yet. lol __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-19-2018, 08:41 PM	#19
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP By the way Jon , I got to meet Roland. Nice guy , speaks fondly of you. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-21-2018, 05:51 AM	#20
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP Sourced the pulley with the part number out of Tulsa Oklahoma. It's on it's way. I'm off to Texas. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-21-2018, 07:15 AM	#21
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: WTB single add on water pump pulley SWP got time for texas but not Detroit, I see how you are...

06-21-2018, 07:27 AM	#22
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: WTB single add on water pump pulley SWP I should have brought you sanitary napkins. Roll a Depends instead. Lol __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-21-2018, 10:14 AM	#23
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: WTB single add on water pump pulley SWP there called adult under garments and i change mine daily, enjoy ur trip!!

Register or Log In To remove these advertisements.