|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-25-2017, 11:11 AM
|
#1 |
|
Registered User
Join Date: Oct 2017
Location: West Lafayette, IN
Posts: 8
|
4" lift leaning towards drivers side
So I just installed a 4" leaf lift from rough country with new leafs and shocks in all four corners on my 1972 Jimmy. Now, my truck is leaning approx. 1" to the drivers side. Front looks to be a bit more then 1" and the rear is approx. 1". Any suggestions? I put the new steering raising arm on and everything is tightened down. I've driven it approx. 1 mile and the lift has been on for about 2 weeks sitting in the garage waiting on the final parts so it's had time to settle. Any help would be appreciated.
|
|
|
|
11-25-2017, 11:36 AM
|
#2 |
|
Senior Member
 
Join Date: Mar 2009
Location: Brigantine NJ
Posts: 819
|
Re: 4" lift leaning towards drivers side
Did you tighten the leaf spring bolts before the truck was on the ground? That could cause the springs to bind. Try loosening all the leaf spring bolts so the truck settles before retightening.
__________________
Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii |
|
|
|
|
11-26-2017, 10:40 AM
|
#3 |
|
Registered User
Join Date: Oct 2017
Location: West Lafayette, IN
Posts: 8
|
Re: 4" lift leaning towards drivers side
Thanks 72gmguy, that's a great idea as I did tighten everything before putting it back on the ground.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
