The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Paint & Bodywork

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-04-2019, 07:42 PM   #1
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Block sanding. How am I doing?

Started block sanding the roof of my Suburban and wanted to get some advice as to how I am doing.

The roof was sanded with 80 grit sandpaper and an orbital sander, coated with an epoxy primer then SPI 2K. I'm using Norton Gold 220 grit sandpaper on a 30" Durablock. I'm sanding at an angle of about 30 degrees. Once I'm done sanding as far as I can with the 220 I plan on spraying on Featherfill and starting again.
Attached Images
   
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-04-2019, 07:45 PM   #2
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Re: Block sanding. How am I doing?

And more pics. I'm using SEM guidecoat too. There are low areas that are black. I'm sanding evenly across the entire top until they go away or until I hit the epoxy primer.
Attached Images
  
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-04-2019, 07:58 PM   #3
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Re: Block sanding. How am I doing?

Also after a couple passes I vacuum the sandpaper and the roof. Then I wipe it down with a microfiber cloth.
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-04-2019, 08:37 PM   #4
mongocanfly
Senior Member
 
Join Date: May 2015
Location: Alabama
Posts: 8,139
Re: Block sanding. How am I doing?

It's best to sand in a x pattern...not just one direction....but it's looking good
__________________
Mongo...aka Greg

1981 c30 lq9 nv4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
1955.1 ls3 tr6060...(under construction)(on hold)
2013 gmc z71. (daily driver)
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
mongocanfly is offline   Reply With Quote
Old 04-04-2019, 09:00 PM   #5
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Re: Block sanding. How am I doing?

Quote:
Originally Posted by mongocanfly View Post
It's best to sand in a x pattern...not just one direction....but it's looking good
Greg I'm sanding this way \ going across twice then this way /twice then I clean the panel and the sandpaper.

Is that ok?
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-04-2019, 09:08 PM   #6
mongocanfly
Senior Member
 
Join Date: May 2015
Location: Alabama
Posts: 8,139
Re: Block sanding. How am I doing?

Yep...I thought you were just doing /
__________________
Mongo...aka Greg

1981 c30 lq9 nv4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
1955.1 ls3 tr6060...(under construction)(on hold)
2013 gmc z71. (daily driver)
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
mongocanfly is offline   Reply With Quote
Old 04-04-2019, 09:33 PM   #7
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Re: Block sanding. How am I doing?

Close up.
Attached Images
 
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-05-2019, 12:03 AM   #8
Foot Stomper
Registered User
 
Foot Stomper's Avatar
 
Join Date: Oct 2015
Location: Calgary, Alberta
Posts: 1,149
Re: Block sanding. How am I doing?

You're doing great! Why in hell would you ruin a great job of sanding your 2k with featherfill? If it's straight, paint it!
If it even needed featherfill, which I doubt, you should have used it before 2K...
__________________
So when is this "Old enough to know better" supposed to kick in?

My 1959 GMC build thread http://67-72chevytrucks.com/vboard/s...d.php?t=686989

Last edited by Foot Stomper; 04-05-2019 at 12:08 AM.
Foot Stomper is offline   Reply With Quote
Old 04-05-2019, 07:26 AM   #9
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Re: Block sanding. How am I doing?

Well it has low spots all over the place. I can’t paint it with all the low spots.
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-05-2019, 08:10 AM   #10
MP&C
Registered User
 
MP&C's Avatar
 
Join Date: Jan 2013
Location: Leonardtown, MD
Posts: 1,249
Re: Block sanding. How am I doing?

make sure your sanding block is a good 2x or more the length of the distance between high spots. When you sand side to side, you don't want the sanding block dropping in the low and cutting out the low. If it stays on top, it only cuts the highs.
__________________
Robert
MP&C is offline   Reply With Quote
Old 04-05-2019, 07:00 PM   #11
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Re: Block sanding. How am I doing?

Quote:
Originally Posted by MP&C View Post
make sure your sanding block is a good 2x or more the length of the distance between high spots. When you sand side to side, you don't want the sanding block dropping in the low and cutting out the low. If it stays on top, it only cuts the highs.
Iím using a 30Ē Durablock and it feels like it is working well. Iíve also been varying the angle of my X pattern from 45 to 30 or so degrees.
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-06-2019, 01:07 AM   #12
Foot Stomper
Registered User
 
Foot Stomper's Avatar
 
Join Date: Oct 2015
Location: Calgary, Alberta
Posts: 1,149
Re: Block sanding. How am I doing?

If you can block it flat with high build 2k urethane primer, there's no need for featherfill. Right?
If you can't block it flat with high build, then you have to put more high build on or go with featherfill...in which case you'll have to high build primer the featherfill because it's not meant to be painted because it's too hard to sand with finer grits and is too coarse and porous for paint.
__________________
So when is this "Old enough to know better" supposed to kick in?

My 1959 GMC build thread http://67-72chevytrucks.com/vboard/s...d.php?t=686989
Foot Stomper is offline   Reply With Quote
Old 04-06-2019, 08:51 AM   #13
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Re: Block sanding. How am I doing?

Quote:
Originally Posted by Foot Stomper View Post
If you can block it flat with high build 2k urethane primer, there's no need for featherfill. Right?
If you can't block it flat with high build, then you have to put more high build on or go with featherfill...in which case you'll have to high build primer the featherfill because it's not meant to be painted because it's too hard to sand with finer grits and is too coarse and porous for paint.
Thanks. In another thread I was told I could sand the featherfill with 220 then 320 wet sand with 600 and do the base coat.
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-06-2019, 09:24 AM   #14
Foot Stomper
Registered User
 
Foot Stomper's Avatar
 
Join Date: Oct 2015
Location: Calgary, Alberta
Posts: 1,149
Re: Block sanding. How am I doing?

Quote:
Originally Posted by pwdcougar View Post
Thanks. In another thread I was told I could sand the featherfill with 220 then 320 wet sand with 600 and do the base coat.
That's unfortunate.

Feather Fill is nothing more than sprayable bondo.... made by a body filler company. Feather fill has one benefit; it's ideal for large panels that are so far from straight to start with that spreading bondo by hand is not realistic or cost effective.

Urethane high build is made with very fine talc and urethane technology which doesn't shrink, is designed for final stage before paint and is made by most paint companies because of its widely known benefits.

Hopefully your roof is straight enough to not need feather fill. You're doing a great job of blocking. If you have the odd, slight low spot you can put finishing putty on them, sand it, then high build that spot without issue.
__________________
So when is this "Old enough to know better" supposed to kick in?

My 1959 GMC build thread http://67-72chevytrucks.com/vboard/s...d.php?t=686989
Foot Stomper is offline   Reply With Quote
Old 04-06-2019, 12:14 PM   #15
nsb29
Senior Member
 
nsb29's Avatar
 
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 871
Talking Re: Block sanding. How am I doing?

I have worked at a shop that has won multiple awards including pebble beach for paint every one has there own opinion and what thay Like all high build primerĎs have talc in them some people say they donít like the slick sand or feather feel because they are full of talc thay call it spray on Bondo hard to sand and you canít paint over it or it has to be top coated non off this is true if you read the instructions I have used it for twenty years O shrinkage O Die-backs I am the one that said you can sand it down to 600 and I will stand behind it I see cars we panted 15/20 years ago that look like thay were panted yesterday I have not seen a spot putty that did not shrink and if you have used Bondo youíre urethane primer itís not going to stop diebacks it works fine on straight stuff body shops use it itís good for production it cost effective but this is my opinion and experience
__________________
Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent
Also A/C center duck for 65 Chevelle
3-D scanning and printing of rare and obsolete parts
nsb29 is offline   Reply With Quote
Old 04-06-2019, 12:28 PM   #16
Foot Stomper
Registered User
 
Foot Stomper's Avatar
 
Join Date: Oct 2015
Location: Calgary, Alberta
Posts: 1,149
Re: Block sanding. How am I doing?

Quote:
Originally Posted by nsb29 View Post
I have worked at a shop that has won multiple awards including pebble beach for paint every one has there own opinion and what thay Like all high build primer‘s have talc in them some people say they don’t like the slick sand or feather feel because they are full of talc thay call it spray on Bondo hard to sand and you can’t paint over it or it has to be top coated non off this is true if you read the instructions I have used it for twenty years O shrinkage O Die-backs I am the one that said you can sand it down to 600 and I will stand behind it I see cars we panted 15/20 years ago that look like thay were panted yesterday I have not seen a spot putty that did not shrink and if you have used Bondo you’re urethane primer it’s not going to stop diebacks it works fine on straight stuff body shops use it it’s good for production it cost effective but this is my opinion and experience
I read the TDS on feather fill....has anyone else?
Where does it say you can paint it?

There's short cuts and experiments that many put these products through, but unless the TDS says it's ok, it's not.

My many years in the business and factory trained on fillers and several paint companies have taught me this...nonr ever said you can paint body filler.

There's the right way, then there's improv... I chose the manufacturers reccomended procedure over years of experiments.

For clarity, I said finishing putty, not glazing putty which is lacquer based and is not a product I was use anywhere.

Good luck with your project OP.
__________________
So when is this "Old enough to know better" supposed to kick in?

My 1959 GMC build thread http://67-72chevytrucks.com/vboard/s...d.php?t=686989

Last edited by Foot Stomper; 04-06-2019 at 12:38 PM.
Foot Stomper is offline   Reply With Quote
Old 04-06-2019, 12:44 PM   #17
nsb29
Senior Member
 
nsb29's Avatar
 
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 871
Re: Block sanding. How am I doing?

Quote:
Originally Posted by Foot Stomper View Post
I read the TDS on feather fill....has anyone else?
Where does it say you can paint it?

There's short cuts and experiments that many put these products through, but unless the TDS says it's ok, it's not.

My many years in the business and factory trained on fillers and several paint companies have taught me this...nonr ever said you can paint body filler.

There's the right way, then there's improv... I chose the manufacturers reccomended procedure over years of experiments.

Good luck with your project OP.
You obviously have never read the instructions on slick sand or feather feel and your comment about painting over Bondo is just BS sarcasm sorry
__________________
Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent
Also A/C center duck for 65 Chevelle
3-D scanning and printing of rare and obsolete parts
nsb29 is offline   Reply With Quote
Old 04-06-2019, 03:39 PM   #18
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Re: Block sanding. How am I doing?

I have a little bit of SPI 2K primer left. Can I just spray the low spots or should I get another gallon and do the entire roof?
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-06-2019, 08:08 PM   #19
Foot Stomper
Registered User
 
Foot Stomper's Avatar
 
Join Date: Oct 2015
Location: Calgary, Alberta
Posts: 1,149
Re: Block sanding. How am I doing?

Quote:
Originally Posted by pwdcougar View Post
I have a little bit of SPI 2K primer left. Can I just spray the low spots or should I get another gallon and do the entire roof?
There's no harm in spot spraying primer if you do it right.
One such method is to spray three coats, the first being the smallest area, the second a little larger area, then a third a little larger area yet.

If you run out, you run out...then go buy more. There's no reason to spray the entire roof, unless you're selling primer.
__________________
So when is this "Old enough to know better" supposed to kick in?

My 1959 GMC build thread http://67-72chevytrucks.com/vboard/s...d.php?t=686989
Foot Stomper is offline   Reply With Quote
Old 04-06-2019, 10:10 PM   #20
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Re: Block sanding. How am I doing?

Quote:
Originally Posted by Foot Stomper View Post
There's no harm in spot spraying primer if you do it right.
One such method is to spray three coats, the first being the smallest area, the second a little larger area, then a third a little larger area yet.

If you run out, you run out...then go buy more. There's no reason to spray the entire roof, unless you're selling primer.
Got it! Thanks again!
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-17-2019, 08:09 PM   #21
pwdcougar
Senior Member
 
pwdcougar's Avatar
 
Join Date: Oct 2013
Location: New Jersey
Posts: 986
Re: Block sanding. How am I doing?

Well the main portion of the roof finally has no low spots. I've been sanding with 220 and plan on moving on to 320 after spraying on the guide coat. One question: is there a going to be a problem in the areas where the epoxy is showing through the 2K?

Thanks

Paul
__________________
"You know that little thing in your head that keeps you from saying things you shouldn't? Yeah well, I don't have one of those"

1969 Mercury Cougar Standard 4 speed
1969 Mercury Cougar XR7 convertible
1970 4WD Chevrolet Suburban
1968 2WD GMC Suburban
1997 4WD Chevrolet Silverado Extended Cab Short Bed (purchased new January 1997)
pwdcougar is offline   Reply With Quote
Old 04-19-2019, 07:33 AM   #22
nsb29
Senior Member
 
nsb29's Avatar
 
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 871
Re: Block sanding. How am I doing?

Only if you sand through to metal if that happens spot those places in with a reduced primer and then 600 The whole peas
__________________
Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent
Also A/C center duck for 65 Chevelle
3-D scanning and printing of rare and obsolete parts
nsb29 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com