`05 Colorado - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cardiac · 05-17-2009, 11:49 PM

Newbie here. Daughters truck sits in the driveway with 3 of the 6 wheel studs broken off. they're the pressed in type and should be fairly easy to change but I can't get the brake shoes backed off to be able to get the drum off.
Is there an adjuster on these brakes?
Thanks in advance

**truckdude239** · 05-18-2009, 06:47 AM

there should be. stupid question but have you made sure the parking brake is off? the last one i did i just taped the drum off it was on real tight

Cardiac · 05-18-2009, 09:30 AM

Yep, the pb is off. That drum is real tight, I can get it to move out maybe
3/8" then it sticks. I've removed a plug at the top of the backing plate but there dosen't seem to be any kind of notched wheel that I can get the brake tool onto.
Damn, I've got a manual ordered for this truck but it won't be here for a week.

**truckdude239** · 05-18-2009, 08:00 PM

here is the picture i have foudn i've had to use small screw drivers as the star whell doe not always line up with the whole in the backing plate

**bwood** · 05-18-2009, 10:44 PM

There is a tool made that is suppost to help with this. I think it is called a brake spoon. It sounds like you know what you are looking for. Judging by the pic from truckdude, it looks like it might be higher up than the hole. You might spray some brake cleaner inside the hole to help clean it up some. Also when you go to take the studs out, try pressing them out with a c clamp and a large socket or get a tool for pressing them out. THe axle flange isn't that hard to damage.

Here are some pics of the tools I mentioned:

http://store.summitracing.com/partde...5&autoview=sku

http://store.summitracing.com/partde...5&autoview=sku

http://www.otctools.com/products/detail.php?id=1826

Cardiac · 05-18-2009, 11:14 PM

Thanks guys, Ive got a couple versions of the brake tool and past experience as well as current info sz a couple ot taps with a hammer should pop the broken ones out. I'll use a drift punch and big hammer carefully.

05-17-2009, 11:49 PM	#1
Cardiac Registered User Join Date: May 2009 Location: Mississauga, ON, Canada Posts: 3	`05 Colorado Newbie here. Daughters truck sits in the driveway with 3 of the 6 wheel studs broken off. they're the pressed in type and should be fairly easy to change but I can't get the brake shoes backed off to be able to get the drum off. Is there an adjuster on these brakes? Thanks in advance Last edited by Cardiac; 05-17-2009 at 11:50 PM.

05-18-2009, 06:47 AM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,217	Re: `05 Colorado there should be. stupid question but have you made sure the parking brake is off? the last one i did i just taped the drum off it was on real tight __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube Last edited by truckdude239; 05-18-2009 at 06:47 AM.

05-18-2009, 09:30 AM	#3
Cardiac Registered User Join Date: May 2009 Location: Mississauga, ON, Canada Posts: 3	Re: `05 Colorado Yep, the pb is off. That drum is real tight, I can get it to move out maybe 3/8" then it sticks. I've removed a plug at the top of the backing plate but there dosen't seem to be any kind of notched wheel that I can get the brake tool onto. Damn, I've got a manual ordered for this truck but it won't be here for a week.

05-18-2009, 08:00 PM	#4
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,217	Re: `05 Colorado here is the picture i have foudn i've had to use small screw drivers as the star whell doe not always line up with the whole in the backing plate Attached Images __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

05-18-2009, 10:44 PM	#5
bwood Registered User Join Date: Jan 2003 Location: Denison, Texas Posts: 1,919	Re: `05 Colorado There is a tool made that is suppost to help with this. I think it is called a brake spoon. It sounds like you know what you are looking for. Judging by the pic from truckdude, it looks like it might be higher up than the hole. You might spray some brake cleaner inside the hole to help clean it up some. Also when you go to take the studs out, try pressing them out with a c clamp and a large socket or get a tool for pressing them out. THe axle flange isn't that hard to damage. Here are some pics of the tools I mentioned: http://store.summitracing.com/partde...5&autoview=sku http://store.summitracing.com/partde...5&autoview=sku http://www.otctools.com/products/detail.php?id=1826 __________________ 1998 GMC Sierra SLE 1/2 ton 2WD 305 Vortec -Gibson Stainless Cat Back Swept Side -SS Wheels 2005 Honda CRF250R 2006 Honda CRF150F

05-18-2009, 11:14 PM	#6
Cardiac Registered User Join Date: May 2009 Location: Mississauga, ON, Canada Posts: 3	Re: `05 Colorado Thanks guys, Ive got a couple versions of the brake tool and past experience as well as current info sz a couple ot taps with a hammer should pop the broken ones out. I'll use a drift punch and big hammer carefully.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.