The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-20-2018, 12:58 AM   #1
OldCreek
Registered User
 
OldCreek's Avatar
 
Join Date: Jan 2007
Location: Central Coast California
Posts: 1,026
My K/5 Bikini Top

I just wanted to post an example of what I've done. Maybe it will serve as a motivation. It took me years to get around to it!

I took one of robs71k5 fiberglass windshield headers and used it to mount a bikini top. I initially planned to use snap ring connectors but instead used heavy duty velcro tape and sewed it onto the top and taped it to the header. I suppose that if you have a soft topper and Rob's header you could match up the snaps and install one of your own bikinis. If the velcro is not strong enough I will add some snaps but it doesn't appear necessary at this time.

I took water resistant/UV resistant outdoor canvas and UV resistant nylon thread and sewed this up at home with 1" straps. I added some plastic disconnects and a metal strap mount. The strap mount connects to my rear roll bar anchor point. The plastic disconnects allow for tighter tension. I, also, used a couple of strap locks to keep them from loosening. (not pictured)

It needs a little fine tuning but I'm happy.

The ride is much nicer up front. The amount of wind is really cut down. I can drive without sunglasses on now. Before that, there was way too much wind/dust that would get in my eyes. The shade is nice, too.
Attached Images
    
__________________
1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold
1972 C10 5.3L/4L60E 12bolt 5Lug - Sold
1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!!
1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold
1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold
1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold)
2003 K2500HD 8.1/Allison1000/NP263

Last edited by OldCreek; 06-20-2018 at 01:22 AM.
OldCreek is offline   Reply With Quote
Old 06-20-2018, 01:06 AM   #2
OldCreek
Registered User
 
OldCreek's Avatar
 
Join Date: Jan 2007
Location: Central Coast California
Posts: 1,026
Re: My K/5 Bikini Top

A couple more pics:

Rob's header is really solid. The mount points really secure the header.

At 60mph, the wind noise is really not bad at all! The bikini does fill up like a sail, however. I have a couple of small fine tuning projects to add to this bikini to make it even better.
Attached Images
   
__________________
1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold
1972 C10 5.3L/4L60E 12bolt 5Lug - Sold
1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!!
1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold
1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold
1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold)
2003 K2500HD 8.1/Allison1000/NP263
OldCreek is offline   Reply With Quote
Old 06-20-2018, 01:43 AM   #3
Radiatta_71
Registered User
 
Radiatta_71's Avatar
 
Join Date: Jul 2002
Location: Vancouver, WA
Posts: 117
Re: My K/5 Bikini Top

looks great. let me know how the velcro holds up!
Radiatta_71 is offline   Reply With Quote
Old 06-20-2018, 02:03 AM   #4
Killer Bee
Registered User
 
Killer Bee's Avatar
 
Join Date: Jan 2016
Location: Barber City, CA
Posts: 4,717
Re: My K/5 Bikini Top

hey look, I don't mind if I'm in the sun in the back seat, but what about the BEER in the back?!

JK, looks great, hope your custom craftsmanship holds up!
__________________
I started out with nothing - and I still have most of it
Killer Bee is offline   Reply With Quote
Old 06-20-2018, 11:01 AM   #5
chevyguy_72
Vintage Evil
 
chevyguy_72's Avatar
 
Join Date: Aug 2005
Location: Broomfield, CO
Posts: 956
Re: My K/5 Bikini Top

Looks great... good job...
__________________
Current Rides:
Vintage Evil - 72 Chevy C10 (Always a work in progress) Vintage Evil Build Thread
EvilK5 - 71 K5 Blazer
Evil Twin - 2006 Suzuki M109R
EvilDmax- 2018 GMC 2500 Denali Duramax
chevyguy_72 is offline   Reply With Quote
Old 06-20-2018, 11:09 AM   #6
Yukon Jack
Post Whore
 
Yukon Jack's Avatar
 
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,683
Re: My K/5 Bikini Top

Nice!
__________________
1970 Blazer with a 400 sbc and 4" lift
1980 Pontiac Trans Am, 455 Oldsmobile
2012 Kawasaki Concours 14
Yukon Jack is offline   Reply With Quote
Old 06-26-2018, 12:05 AM   #7
solo72
Registered User
 
solo72's Avatar
 
Join Date: Jul 2016
Location: KIRKLAND, WA
Posts: 30
Re: My K/5 Bikini Top

Looks killer!
solo72 is offline   Reply With Quote
Old 01-13-2019, 09:22 PM   #8
OldCreek
Registered User
 
OldCreek's Avatar
 
Join Date: Jan 2007
Location: Central Coast California
Posts: 1,026
Re: My K/5 Bikini Top

Quote:
Originally Posted by Killer Bee View Post
hey look, I don't mind if I'm in the sun in the back seat, but what about the BEER in the back?!

JK, looks great, hope your custom craftsmanship holds up!
See the aluminum bed box? Just fill it up with ice and some cold ones!
__________________
1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold
1972 C10 5.3L/4L60E 12bolt 5Lug - Sold
1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!!
1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold
1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold
1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold)
2003 K2500HD 8.1/Allison1000/NP263
OldCreek is offline   Reply With Quote
Old 01-13-2019, 10:24 PM   #9
OldCreek
Registered User
 
OldCreek's Avatar
 
Join Date: Jan 2007
Location: Central Coast California
Posts: 1,026
Re: My K/5 Bikini Top

Thanks for the compliments!

I added a few items:

1. Front strap that connects to the header/windshield frame via that bolt you can see. (I punched a hole in the strap.) This secures the top and keeps it from ballooning so much. It, also, helps pull it tight.

2. Rear roll bar strap. This keeps the flapping down and the ballooning down.

3. Front header to roll bar strap. This keeps the bikini from sagging onto my head after it has stretched from all the ballooning. It's also good to hang stuff on...towels, swim trunks, etc. (I bought those roll bar clamps on eBay.)
Attached Images
   
__________________
1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold
1972 C10 5.3L/4L60E 12bolt 5Lug - Sold
1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!!
1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold
1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold
1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold)
2003 K2500HD 8.1/Allison1000/NP263

Last edited by OldCreek; 01-13-2019 at 10:53 PM.
OldCreek is offline   Reply With Quote
Old 01-16-2019, 10:17 AM   #10
GMCNUT
Senior Member
 
GMCNUT's Avatar
 
Join Date: Jun 2007
Location: Arab Alabama
Posts: 1,809
Re: My K/5 Bikini Top

Have you considered making these as kits and making money selling them? I am about to buy a 1,000.00+ dollar Softopper in an effort to prevent getting wet seats when we get our very common late afternoon unexpected rain showers during the Summer, but this thing might do the trick too
__________________
My Projects and Toys - All 100% Stock
1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction
1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar
1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock
1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd
1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet
1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight
1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB
1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet
1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet
1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.
GMCNUT is offline   Reply With Quote
Old 01-18-2019, 10:34 AM   #11
fun in dirt
Registered User
 
fun in dirt's Avatar
 
Join Date: Jan 2007
Location: Mississippi
Posts: 2,117
Re: My K/5 Bikini Top

The added straps are a great idea ... I will probably do something like that on my next bikini top revision ... clean & simple for the win!
__________________
'72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432
'85 K30 "Big Nassy"
'06 3500 Duramax ...tow truck
'06 Silverado SS...DD
'06 C1500 WT...DD
'07 Classic C1500 WT...DD
Built & sold cause can't keep 'em all:
'72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190
'55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938
'69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541
'86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619
fun in dirt is offline   Reply With Quote
Old 01-18-2019, 10:22 PM   #12
PGG
Registered User
 
Join Date: Mar 2015
Location: Fort Worth Texas
Posts: 280
Re: My K/5 Bikini Top

Love it wish mine was white. I am wanting to make a hard bikini top out of a damaged hardtop. I did a open side one before (posted somewhere on here) and post it here but it developed some cracks and I am worried if it blew off I would kill someone. I might just cut it after the roll bar now have not decided. PG

Quote:
Originally Posted by OldCreek View Post
I just wanted to post an example of what I've done. Maybe it will serve as a motivation. It took me years to get around to it!

I took one of robs71k5 fiberglass windshield headers and used it to mount a bikini top. I initially planned to use snap ring connectors but instead used heavy duty velcro tape and sewed it onto the top and taped it to the header. I suppose that if you have a soft topper and Rob's header you could match up the snaps and install one of your own bikinis. If the velcro is not strong enough I will add some snaps but it doesn't appear necessary at this time.

I took water resistant/UV resistant outdoor canvas and UV resistant nylon thread and sewed this up at home with 1" straps. I added some plastic disconnects and a metal strap mount. The strap mount connects to my rear roll bar anchor point. The plastic disconnects allow for tighter tension. I, also, used a couple of strap locks to keep them from loosening. (not pictured)

It needs a little fine tuning but I'm happy.

The ride is much nicer up front. The amount of wind is really cut down. I can drive without sunglasses on now. Before that, there was way too much wind/dust that would get in my eyes. The shade is nice, too.
PGG is offline   Reply With Quote
Old 01-19-2019, 02:40 AM   #13
OldCreek
Registered User
 
OldCreek's Avatar
 
Join Date: Jan 2007
Location: Central Coast California
Posts: 1,026
Re: My K/5 Bikini Top

Quote:
Originally Posted by GMCNUT View Post
Have you considered making these as kits and making money selling them? I am about to buy a 1,000.00+ dollar Softopper in an effort to prevent getting wet seats when we get our very common late afternoon unexpected rain showers during the Summer, but this thing might do the trick too
I've thought about it... but my sewing is not all that great and I'd probably need more of an industrial machine. Maybe I could find an upholstery shop and provide them the template.

However, there'd be quite a bit of variance because of the position of people's roll bar, etc.

Besides, for the time spent I'd probably make more per hour at my regular job.

but maybe...
__________________
1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold
1972 C10 5.3L/4L60E 12bolt 5Lug - Sold
1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!!
1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold
1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold
1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold)
2003 K2500HD 8.1/Allison1000/NP263
OldCreek is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:35 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com