I think I've decided on a build "theme" - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 04-28-2011, 01:34 PM

look in the classifieds on this forum, or post an add on this forum WTB or wanted to buy , clean set of doors and fenders to be shipped or in your area

99-LS1-SS · 05-04-2011, 06:18 PM

My first round of purchased parts showed up today.

Some of the parts include a new gauge cluster with a 5000 rpm tach. A new tilt steering column for an automatic transmission, new vent windows and various patch panels as well as some other small parts.

Yay! As soon as I get some gas for my welder, I will be able to start replacing rusted parts.

**FRENCHBLUE72** · 05-04-2011, 07:32 PM

The dash cluster looks awesome,but why is the font on the numbers different than factory?

99-LS1-SS · 05-04-2011, 07:36 PM

Not sure why the font is different. It isn't night and day but it is different.

The original looks like it's a little bit more bold.

Here they are side by side.

VA72C10 · 05-04-2011, 07:43 PM

It's the new reproduction lenses..they all look that way.

Nice parts!

Cameron 1137 · 05-04-2011, 07:55 PM

that cluster looks sweet!

1949gmc · 05-04-2011, 11:31 PM

If you didn't get them today, I'd say tomorrow you should have some torsion boxes and end caps.

99-LS1-SS · 05-05-2011, 06:19 AM

Thanks Ray.

**67cheby** · 05-05-2011, 12:22 PM

LOOKING good....i am trying to rebuild my vent wings....what a pain in the butt, i should have just bought them !! LOL

BuckLucky · 05-05-2011, 12:23 PM

Awesome build so far !

99-LS1-SS · 05-05-2011, 07:14 PM

More goodies in the driveway when I got home! My garage is quickly running out of room.

Thanks Ray aka 1949gmc.

Torsion boxes and caps.

VA72C10 · 05-05-2011, 08:00 PM

being triplus those hopefully will fit well!

1971blazerguy · 05-06-2011, 05:36 PM

hi what are the part #s for the end caps and torsion boxes? and where are they from ive been looking for them thanks

r1lorenzini · 05-06-2011, 06:07 PM

Quote:

Originally Posted by 99-LS1-SS

I agree. There's a chance of rain the next 3 days so I might have to wait. I want to get a picture of her standing beside it in the "before" stage and another picture after it is completed. I just told my wife that if I die, I want this to be my daughter's truck.

Great quote! That way the wife can never make you sell it!!! LOL

99-LS1-SS · 05-20-2011, 02:56 PM

No picture worthy updates.
I ordered the body bushing kit and it was on backorder for 3 weeks. It came in the other day so I opened it up yesterday so I could put the new radiator support back on so I could mount the fenders and then rehang the doors so I could get the tub correctly braced before I start cutting panels out. The full body bushing kit comes with everything BUT the nuts and bolts. I ordered those last night so, once those come in I hope to have a real update on my progress.

99-LS1-SS · 05-24-2011, 08:32 PM

I finally made a tiny bit of progress. Nothing has been easy so far. I purchased the entire brake system and the booster and master cylinder should be here tomorrow or Thursday.

The bolts holding the rear wheel cylinder on are, pretty much, not coming out. I'm going to take a grinder to them in the next few days. The brake hoses that NAPA gave me were the wrong hoses so I have to take them back tomorrow.

After all of that, I managed to get 1 front rotor, caliper, wheel bearing, seals and set of pads on today. I could have gotten the other side done but I spent about 45 minutes cleaning the spindle. It took a scraper and lots of scrubbing.

Here's the picture of my tiny bit of progress.

Cameron 1137 · 05-24-2011, 09:46 PM

brakes are fun! looks great man

99-LS1-SS · 05-26-2011, 08:24 PM

I've gotten a few more parts in the last few days. My main focus right now is the brakes. My brake system is pretty well shot. I'm going through the entire system and replacing every part of the brakes. I've got all of the front lines and in the next day or so I'll get all of the rear lines. I continue to get my butt kicked by the bolts holding the passenger's side wheel cylinder on.

Here are a couple of pictures of some of the new and used parts.

Big block frame stands, clam shells and motor mounts. The frame stands and clamshells are courtesy of t korinek. I just spent the last 2 hours cleaning and degreasing them. I painted one side of them. I'll post a picture of them after they're cleaned up. The mounts are new from GMC Pauls.

I got a booster, master cylinder, proportioner valve and the front brake hoses from NAPA. I've already got the rotors caliper and new bearings and seals.

hgs_notes · 05-27-2011, 08:41 AM

Just use a 6 sided socket on the wheel cylinder bolts, tighten until they break off, which wont be much. Your tossing them anyway.

99-LS1-SS · 05-28-2011, 07:09 PM

I FINALLY got the rear wheel cylinder off and the rear brakes put back together. So far, I've got the passenger's side brakes complete with the exception of the hard lines.

99-LS1-SS · 05-30-2011, 05:16 PM

The long weekend was good for me and progress on the Blazer. I was able to get the engine and transmission out. I got the passenger's side brakes done. I got the booster and master cylinder off and I got the car spun around so I can work on the driver's side brakes.

Here's right after I pulled the engine and transmission. It was a mess.

Here's my helper after the engine and transmission were pulled.

Here's the Blazer after I spun it around on dollies. Hopefully, she won't end up on the Price is Right... I had to straighten up some.

99-LS1-SS · 05-30-2011, 07:22 PM

I also cleaned up the big block motor mounts and painted them.

Here's the before and after.

Before:

After:

VA72C10 · 05-30-2011, 07:43 PM

Good progress. Yes, my two little girls like to ham it up for the camera too

elzombo · 05-31-2011, 07:28 AM

Great progress. Looking good.
Posted via Mobile Device

99-LS1-SS · 06-03-2011, 04:45 PM

Yay! Drop spindles came in today. Tie rods (inner and outer) came in yesterday. Now all I need is time to start cleaning the frame up some and putting new parts on.

04-28-2011, 01:34 PM	#76
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: I think I've decided on a build "theme" look in the classifieds on this forum, or post an add on this forum WTB or wanted to buy , clean set of doors and fenders to be shipped or in your area __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-04-2011, 06:18 PM	#77
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" My first round of purchased parts showed up today. Some of the parts include a new gauge cluster with a 5000 rpm tach. A new tilt steering column for an automatic transmission, new vent windows and various patch panels as well as some other small parts. Yay! As soon as I get some gas for my welder, I will be able to start replacing rusted parts. Last edited by 99-LS1-SS; 05-04-2011 at 06:42 PM. Reason: Added some pictures

05-04-2011, 07:32 PM	#78
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: I think I've decided on a build "theme" The dash cluster looks awesome,but why is the font on the numbers different than factory? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-04-2011, 07:36 PM	#79
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" Not sure why the font is different. It isn't night and day but it is different. The original looks like it's a little bit more bold. Here they are side by side.

05-04-2011, 07:43 PM	#80
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: I think I've decided on a build "theme" It's the new reproduction lenses..they all look that way. Nice parts! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-04-2011, 07:55 PM	#81
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: I think I've decided on a build "theme" that cluster looks sweet! __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

05-04-2011, 11:31 PM	#82
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: I think I've decided on a build "theme" If you didn't get them today, I'd say tomorrow you should have some torsion boxes and end caps.

05-05-2011, 06:19 AM	#83
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" Thanks Ray.

05-05-2011, 12:22 PM	#84
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: I think I've decided on a build "theme" LOOKING good....i am trying to rebuild my vent wings....what a pain in the butt, i should have just bought them !! LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-05-2011, 12:23 PM	#85
BuckLucky Registered User Join Date: Apr 2008 Location: Tenino, Washington Posts: 51	Re: I think I've decided on a build "theme" Awesome build so far !

05-05-2011, 07:14 PM	#86
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" More goodies in the driveway when I got home! My garage is quickly running out of room. Thanks Ray aka 1949gmc. Torsion boxes and caps.

05-05-2011, 08:00 PM	#87
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: I think I've decided on a build "theme" being triplus those hopefully will fit well! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-06-2011, 05:36 PM	#88
1971blazerguy Registered User Join Date: Aug 2009 Location: windsor ontario Posts: 25	Re: I think I've decided on a build "theme" hi what are the part #s for the end caps and torsion boxes? and where are they from ive been looking for them thanks

05-20-2011, 02:56 PM	#90
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" No picture worthy updates. I ordered the body bushing kit and it was on backorder for 3 weeks. It came in the other day so I opened it up yesterday so I could put the new radiator support back on so I could mount the fenders and then rehang the doors so I could get the tub correctly braced before I start cutting panels out. The full body bushing kit comes with everything BUT the nuts and bolts. I ordered those last night so, once those come in I hope to have a real update on my progress. Last edited by 99-LS1-SS; 05-20-2011 at 02:56 PM.

05-24-2011, 08:32 PM	#91
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" I finally made a tiny bit of progress. Nothing has been easy so far. I purchased the entire brake system and the booster and master cylinder should be here tomorrow or Thursday. The bolts holding the rear wheel cylinder on are, pretty much, not coming out. I'm going to take a grinder to them in the next few days. The brake hoses that NAPA gave me were the wrong hoses so I have to take them back tomorrow. After all of that, I managed to get 1 front rotor, caliper, wheel bearing, seals and set of pads on today. I could have gotten the other side done but I spent about 45 minutes cleaning the spindle. It took a scraper and lots of scrubbing. Here's the picture of my tiny bit of progress. Last edited by 99-LS1-SS; 05-24-2011 at 08:34 PM.



Register or Log In To remove these advertisements.

05-24-2011, 09:46 PM	#92
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: I think I've decided on a build "theme" brakes are fun! looks great man __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

05-26-2011, 08:24 PM	#93
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" I've gotten a few more parts in the last few days. My main focus right now is the brakes. My brake system is pretty well shot. I'm going through the entire system and replacing every part of the brakes. I've got all of the front lines and in the next day or so I'll get all of the rear lines. I continue to get my butt kicked by the bolts holding the passenger's side wheel cylinder on. Here are a couple of pictures of some of the new and used parts. Big block frame stands, clam shells and motor mounts. The frame stands and clamshells are courtesy of t korinek. I just spent the last 2 hours cleaning and degreasing them. I painted one side of them. I'll post a picture of them after they're cleaned up. The mounts are new from GMC Pauls. I got a booster, master cylinder, proportioner valve and the front brake hoses from NAPA. I've already got the rotors caliper and new bearings and seals.

05-27-2011, 08:41 AM	#94
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,104	Re: I think I've decided on a build "theme" Just use a 6 sided socket on the wheel cylinder bolts, tighten until they break off, which wont be much. Your tossing them anyway. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

05-28-2011, 07:09 PM	#95
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" I FINALLY got the rear wheel cylinder off and the rear brakes put back together. So far, I've got the passenger's side brakes complete with the exception of the hard lines.

05-30-2011, 05:16 PM	#96
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" The long weekend was good for me and progress on the Blazer. I was able to get the engine and transmission out. I got the passenger's side brakes done. I got the booster and master cylinder off and I got the car spun around so I can work on the driver's side brakes. Here's right after I pulled the engine and transmission. It was a mess. Here's my helper after the engine and transmission were pulled. Here's the Blazer after I spun it around on dollies. Hopefully, she won't end up on the Price is Right... I had to straighten up some.

05-30-2011, 07:22 PM	#97
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" I also cleaned up the big block motor mounts and painted them. Here's the before and after. Before: After:

05-30-2011, 07:43 PM	#98
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: I think I've decided on a build "theme" Good progress. Yes, my two little girls like to ham it up for the camera too __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-31-2011, 07:28 AM	#99
elzombo Registered User Join Date: Oct 2007 Location: Austin, TX Posts: 64	Re: I think I've decided on a build "theme" Great progress. Looking good. Posted via Mobile Device __________________ My '72 Blazer Rebuild http://67-72chevytrucks.com/vboard/s...d.php?t=427586

06-03-2011, 04:45 PM	#100
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: I think I've decided on a build "theme" Yay! Drop spindles came in today. Tie rods (inner and outer) came in yesterday. Now all I need is time to start cleaning the frame up some and putting new parts on.

Register or Log In To remove these advertisements.