|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-24-2011, 02:22 PM
|
#1 |
|
Registered User
Join Date: Oct 2011
Location: Pauline south Carolina
Posts: 1
|
72 two wheeldrive conversion
I have a1972 chevy two wheel drive truck that I want to turn into a fourwheel drive truck, does anyone know what I need to do about putting leaf springs in and getting the front axel in straight thanks for the help.
Posted via Mobile Device |
|
|
|
10-24-2011, 04:04 PM
|
#2 |
|
Senior Member
 
Join Date: Dec 2009
Location: Culpeper, VA
Posts: 431
|
Re: 72 two wheeldrive conversion
I know the frames are different on the front as the four wheel drives have an "offset" for the axle travel. You may want to move this to the 67-72 specific forum and Im sure a bunch can offer advice. My advice would be to find an old cancer ridden 4X truck and recycle the frame.
|
|
|
|
|
10-27-2011, 09:39 PM
|
#3 |
|
Registered User
Join Date: Oct 2011
Location: Denton
Posts: 1
|
Re: 72 two wheeldrive conversion
If you are planing on running a lift anyway,
the frame design is not a major issue Here is where you need to search: http://www.pirate4x4.com/forum/forumdisplay.php?f=17 Hint: you need to be a paying member to search on PBB, to bypass that go to Google, Click advance search and fill the fields what you are searching for is SAS, or straight axle conversion, or swap. Just a sample: http://search.yahoo.com/search;_ylt=...2=sp-qrw-corr- |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
