What did you do to your truck today.The 3rd chapter - Page 93 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72c20customcamper · 08-06-2021, 09:33 PM

Hung out with them

**Already Gone** · 08-07-2021, 12:56 AM

Got my TT 2's mounted on the Bridgestone 255/60 17's. Got some detailing on the centre caps to do then I'll probaby mount em on the truck just to see the look. My truck is in for some changes in the next year or so.

**Already Gone** · 08-07-2021, 06:33 PM

Didn't do it today but back in May I had the ECE Stainless Rear Mount Gas Tank I've had since 2003 along with the ECE Hidden Hitch and Hellwig Rear Sway Bar installed in my truck.

crazyjeenyus · 08-07-2021, 06:46 PM

Not any work got done on the truck except for hanging out with the shop mates and admiring it.

Chevys4life · 08-07-2021, 07:02 PM

Installed my new seat, seat belts, pedal pads, trim, headlight dimmer switch
and surround. It was a good day to finally move this interior along a little further.

67C10Step · 08-08-2021, 01:19 PM

Finished up the bed wood and painted the strips. Now to set the bed back off and get it installed. Also finished up the fuel line from the rear tank to the fuel pump and ran new fuel gauge wire. Gauge appears to be working and we will see about accuracy.

**allchevy58** · 08-08-2021, 08:34 PM

Plugging away. Got the cowl, hood, grill and bumper on.

cab4word67 · 08-08-2021, 08:57 PM

Replaced my tilt front end actuator this morning "BACKWARDS"
It was a brand new 2 row 1" tube radiator. Good thing is I have drove it and it is not leaking, bad news is I dont like it.

**Boog** · 08-09-2021, 09:55 AM

If you are like me, when it will start pissing will always be on your mind, every time you are out in it.

**Boog** · 08-09-2021, 09:59 AM

Quote:

Originally Posted by 67C10Step

Finished up the bed wood and painted the strips. Now to set the bed back off and get it installed. Also finished up the fuel line from the rear tank to the fuel pump and ran new fuel gauge wire. Gauge appears to be working and we will see about accuracy.

Dang, that wood looks good. I think I bought the same wood kit. Did yours come with the holes already drilled? Mine is still in the boxes.

67C10Step · 08-09-2021, 10:07 AM

Quote:

Originally Posted by Boog

Dang, that wood looks good. I think I bought the same wood kit. Did yours come with the holes already drilled? Mine is still in the boxes.

Jim - this is the basic yellow pine kit from Mar K and yes it was pre-drilled except the two edge pieces. I really almost hate to cover up the Boyd tank and all the work under the bed. It's probably the best looking part of the truck at this point.

**Rich72C10** · 08-09-2021, 06:56 PM

Running out of things to do to the truck, which I guess is a good thing?

I almost bought a camper but the guy didn't want to move more than $25 bucks, so I decided to pass. Heck, I am not really 100% I want a camper shell - it just happen to be for sale on Craigslist!

I did decided to buy these United Pacific C677201 Door Sills. Mine had these little rust dots that I kept cleaning up after washing the truck. I figure these are likely to rust at some point too, they weren't all that expensive. I was suppose to get them Friday but the showed up on Saturday. Speedway Motor was good on their shipping guarantee and refunded the FedEx charges because it was 1 day late. Which was nearly the price of one sill!

Now if I can only find some of those wood grain bed rails..... though that will kill me ever getting a camper shell ha!

**Rich72C10** · 08-09-2021, 07:01 PM

Quote:

Originally Posted by Already Gone

Didn't do it today but back in May I had the ECE Stainless Rear Mount Gas Tank I've had since 2003 along with the ECE Hidden Hitch and Hellwig Rear Sway Bar installed in my truck.

Well, actually this reminds me of three things I would love to do! Gas Task relocate and a hidden hitch!

How is that Hellwig Rear Sway Bar? Do you like it, notice a difference?

72c20customcamper · 08-09-2021, 07:15 PM

New carb had to helical one of the stud holes. Carb looks out of place on the truck

**SoCoC10** · 08-09-2021, 07:39 PM

Progress on the Medium Blue and white short bed. 70 bolts to assemble the bed and mount to the frame. Now drilling lots of holes in fresh paint.

**Jiggers72-GMC** · 08-09-2021, 09:02 PM

Quote:

Originally Posted by cab4word67

Replaced my tilt front end actuator this morning "BACKWARDS"
It was a brand new 2 row 1" tube radiator. Good thing is I have drove it and it is not leaking, bad news is I dont like it.

Oh crap, sorry to see that, it would drive me crazy just knowing the damage is there.

SoCoC10, she looks great man, well done so far.

cab4word67 · 08-10-2021, 01:36 AM

SoSoC10 that truck is going to look sweet when your done

**Jiggers72-GMC** · 08-10-2021, 08:27 AM

It's hard to believe that a rubber seal would cut into a steel yoke like that, but I've seen it happen before
[IMG][IMG]

[/IMG][/IMG]

**Jiggers72-GMC** · 08-10-2021, 08:29 AM

more

**pjmoreland** · 08-10-2021, 05:09 PM

I found a key in a hide-a-key box inside my hood that fit my original door locks. I sent that key and the ignition cylinder to LockDoc. He rekeyed the cylinder. I installed everything back in my truck today. I like having the older looking octagonal key. Also, the door locks have a slight detent in the position where you remove the key that the replacement locks I had in my truck did not have. It makes it much easier to find the neutral position where the key will slide out.

**pjmoreland** · 08-12-2021, 11:33 PM

Washed my truck in preparation for a little local car show tomorrow evening.

OregonNed · 08-13-2021, 12:14 AM

New back window and seal from summit. Getting installed on Saturday with some
pics to follow

72c20customcamper · 08-14-2021, 06:53 PM

Changed out the open chamber spacer to the correct carb spacer. Trucks runs better and seat of the pants feel has more power. Before I buttoned it up I had to flip the new spacer over to get full secondaries

OregonNed · 08-14-2021, 07:48 PM

Had my new window installed while attending a truck meet today in Olympia WA

OregonNed · 08-14-2021, 07:48 PM

And finished

08-06-2021, 09:33 PM	#2301
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,145	Re: What did you do to your truck today.The 3rd chapter Hung out with them Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

08-07-2021, 12:56 AM	#2302
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,068	Re: What did you do to your truck today.The 3rd chapter Got my TT 2's mounted on the Bridgestone 255/60 17's. Got some detailing on the centre caps to do then I'll probaby mount em on the truck just to see the look. My truck is in for some changes in the next year or so. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

08-07-2021, 06:33 PM	#2303
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,068	Re: What did you do to your truck today.The 3rd chapter Didn't do it today but back in May I had the ECE Stainless Rear Mount Gas Tank I've had since 2003 along with the ECE Hidden Hitch and Hellwig Rear Sway Bar installed in my truck. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

08-07-2021, 06:46 PM	#2304
crazyjeenyus Registered User Join Date: Feb 2015 Location: Alberta, Canada Posts: 148	Re: What did you do to your truck today.The 3rd chapter Not any work got done on the truck except for hanging out with the shop mates and admiring it. Attached Images __________________ '67 c10 cst farm truck

08-07-2021, 07:02 PM	#2305
Chevys4life Registered User Join Date: Jun 2018 Location: Washington, DC Posts: 639	Re: What did you do to your truck today.The 3rd chapter Installed my new seat, seat belts, pedal pads, trim, headlight dimmer switch and surround. It was a good day to finally move this interior along a little further. Attached Images Last edited by Chevys4life; 08-08-2021 at 01:52 PM. Reason: Misspelling of word

08-08-2021, 01:19 PM	#2306
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,407	Re: What did you do to your truck today.The 3rd chapter Finished up the bed wood and painted the strips. Now to set the bed back off and get it installed. Also finished up the fuel line from the rear tank to the fuel pump and ran new fuel gauge wire. Gauge appears to be working and we will see about accuracy. Attached Images __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2020 Toyota CH-R 2020 Acura MDX

08-08-2021, 08:34 PM	#2307
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,424	Re: What did you do to your truck today.The 3rd chapter Plugging away. Got the cowl, hood, grill and bumper on. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1964 C-30 383/4 speed, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

08-08-2021, 08:57 PM	#2308
cab4word67 Registered User Join Date: Sep 2020 Location: portland oregon Posts: 183	Re: What did you do to your truck today.The 3rd chapter Replaced my tilt front end actuator this morning "BACKWARDS" It was a brand new 2 row 1" tube radiator. Good thing is I have drove it and it is not leaking, bad news is I dont like it.

08-09-2021, 09:55 AM	#2309
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,957	Re: What did you do to your truck today.The 3rd chapter If you are like me, when it will start pissing will always be on your mind, every time you are out in it. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

08-09-2021, 06:56 PM	#2312
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Re: What did you do to your truck today.The 3rd chapter Running out of things to do to the truck, which I guess is a good thing? I almost bought a camper but the guy didn't want to move more than $25 bucks, so I decided to pass. Heck, I am not really 100% I want a camper shell - it just happen to be for sale on Craigslist! I did decided to buy these United Pacific C677201 Door Sills. Mine had these little rust dots that I kept cleaning up after washing the truck. I figure these are likely to rust at some point too, they weren't all that expensive. I was suppose to get them Friday but the showed up on Saturday. Speedway Motor was good on their shipping guarantee and refunded the FedEx charges because it was 1 day late. Which was nearly the price of one sill! Now if I can only find some of those wood grain bed rails..... though that will kill me ever getting a camper shell ha! Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-09-2021, 07:15 PM	#2314
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,145	Re: What did you do to your truck today.The 3rd chapter New carb had to helical one of the stud holes. Carb looks out of place on the truck Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

08-09-2021, 07:39 PM	#2315
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,142	Re: What did you do to your truck today.The 3rd chapter Progress on the Medium Blue and white short bed. 70 bolts to assemble the bed and mount to the frame. Now drilling lots of holes in fresh paint. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count Last edited by SoCoC10; 08-09-2021 at 07:57 PM.

08-10-2021, 01:36 AM	#2317
cab4word67 Registered User Join Date: Sep 2020 Location: portland oregon Posts: 183	Re: What did you do to your truck today.The 3rd chapter SoSoC10 that truck is going to look sweet when your done

08-10-2021, 08:27 AM	#2318
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 541	Re: What did you do to your truck today.The 3rd chapter It's hard to believe that a rubber seal would cut into a steel yoke like that, but I've seen it happen before [IMG][IMG][/IMG][/IMG] __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual

08-10-2021, 08:29 AM	#2319
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 541	Re: What did you do to your truck today.The 3rd chapter more __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual



Register or Log In To remove these advertisements.

08-10-2021, 05:09 PM	#2320
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,329	Re: What did you do to your truck today.The 3rd chapter I found a key in a hide-a-key box inside my hood that fit my original door locks. I sent that key and the ignition cylinder to LockDoc. He rekeyed the cylinder. I installed everything back in my truck today. I like having the older looking octagonal key. Also, the door locks have a slight detent in the position where you remove the key that the replacement locks I had in my truck did not have. It makes it much easier to find the neutral position where the key will slide out. Attached Images

08-12-2021, 11:33 PM	#2321
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,329	Re: What did you do to your truck today.The 3rd chapter Washed my truck in preparation for a little local car show tomorrow evening. Attached Images

08-13-2021, 12:14 AM	#2322
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter New back window and seal from summit. Getting installed on Saturday with some pics to follow Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop Last edited by OregonNed; 08-13-2021 at 12:15 AM. Reason: Misspelled

08-14-2021, 06:53 PM	#2323
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,145	Re: What did you do to your truck today.The 3rd chapter Changed out the open chamber spacer to the correct carb spacer. Trucks runs better and seat of the pants feel has more power. Before I buttoned it up I had to flip the new spacer over to get full secondaries Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

08-14-2021, 07:48 PM	#2324
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter Had my new window installed while attending a truck meet today in Olympia WA Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

08-14-2021, 07:48 PM	#2325
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter And finished Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

Register or Log In To remove these advertisements.