The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-04-2020, 06:53 PM   #1
aknovaman
Registered User
 
Join Date: Aug 2013
Location: Tecumseh
Posts: 338
Cool Simplest DBW cruise control wiring

https://www.youtube.com/watch?v=XUIEzcq-ZFQ
__________________
Project GEZR WGN Volvo
FMCDH
GBU and GBA

http://www.youtube.com/user/aknovaman/videos
aknovaman is offline   Reply With Quote
Old 07-05-2020, 12:54 AM   #2
87chevy.com
Master Tech
 
87chevy.com's Avatar
 
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,031
Re: Simplest DBW cruise control wiring

If you have a factory or repro cruise control then you can just simply connect those 3 wires to the switch...
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit

New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD

A poor man buy's it twice

finally got my domain name back, 87chevy.com.... site rework in progress
87chevy.com is offline   Reply With Quote
Old 07-05-2020, 05:44 PM   #3
First c10
Senior Member
 
First c10's Avatar
 
Join Date: Dec 2012
Location: Los Banos CA
Posts: 2,614
Re: Simplest DBW cruise control wiring

Gen III Only
__________________
1956 Chevy Bel Air 2 door
1956 Chevy 210 4 Door
1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD
1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E
1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR *SOLD*
GO GO!!!
First c10 is offline   Reply With Quote
Old 07-07-2020, 09:00 PM   #4
87chevy.com
Master Tech
 
87chevy.com's Avatar
 
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,031
Re: Simplest DBW cruise control wiring

Just did a 2006 with the same tac module as you show and the diagram pretty much matches the exact same switches you have. Customer didnt care about cruise but schematics seem like nothing special. What is different with your momentary toggle switch vs a stock cruise switch
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit

New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD

A poor man buy's it twice

finally got my domain name back, 87chevy.com.... site rework in progress
87chevy.com is offline   Reply With Quote
Old 07-07-2020, 09:55 PM   #5
aknovaman
Registered User
 
Join Date: Aug 2013
Location: Tecumseh
Posts: 338
Re: Simplest DBW cruise control wiring

My switches cost under $10 so its cheap, easy and clean. it just does not look factory. i generally put the switches very low on the driver side of the dash to semi-hide them but they are still reachable when driving. They can be put inside the center console too but not a reachable. Depending on what factory switch/column you use, the switching logic can be backwards. i.e. pressing the button opens the circuit rather than closing the circuit to apply 12 volts to the TACC. There is a huge writeup on this forum talking about how to use a relay to change the voltage(logic levels) for a mid-80's square body column.

here is a link to it.

http://67-72chevytrucks.com/vboard/s...d.php?t=398006
__________________
Project GEZR WGN Volvo
FMCDH
GBU and GBA

http://www.youtube.com/user/aknovaman/videos
aknovaman is offline   Reply With Quote
Old 07-13-2020, 09:58 PM   #6
truckdude239
Senior Member
 
truckdude239's Avatar
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 9,962
Re: Simplest DBW cruise control wiring

Quote:
Originally Posted by aknovaman View Post
My switches cost under $10 so its cheap, easy and clean. it just does not look factory. i generally put the switches very low on the driver side of the dash to semi-hide them but they are still reachable when driving. They can be put inside the center console too but not a reachable. Depending on what factory switch/column you use, the switching logic can be backwards. i.e. pressing the button opens the circuit rather than closing the circuit to apply 12 volts to the TACC. There is a huge writeup on this forum talking about how to use a relay to change the voltage(logic levels) for a mid-80's square body column.

here is a link to it.

http://67-72chevytrucks.com/vboard/s...d.php?t=398006
Where do I find these switchs I'd like to do this on my c10
__________________
David fuller
Ase Certified Mechanic
Click here to help support our board!!


1971 Chevy c-10 under going a 4.8l LSx swap

Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305

2007 Honda Accord my daily 145kmiles
2002 Honda Accord 4 door With 330k(sisters car)
2005 toyota Avalon 228k( brothers car)
2002 Sububran 5.3 245k
2000 Tahoe 5.3l 378

General manager for Marco's Carwash & lube
truckdude239 is offline   Reply With Quote
Old 07-13-2020, 10:16 PM   #7
truckdude239
Senior Member
 
truckdude239's Avatar
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 9,962
Re: Simplest DBW cruise control wiring

Nm I found some on amazon on off on momentary and a on off regulator switxh
__________________
David fuller
Ase Certified Mechanic
Click here to help support our board!!


1971 Chevy c-10 under going a 4.8l LSx swap

Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305

2007 Honda Accord my daily 145kmiles
2002 Honda Accord 4 door With 330k(sisters car)
2005 toyota Avalon 228k( brothers car)
2002 Sububran 5.3 245k
2000 Tahoe 5.3l 378

General manager for Marco's Carwash & lube
truckdude239 is offline   Reply With Quote
Old 07-13-2020, 10:42 PM   #8
aknovaman
Registered User
 
Join Date: Aug 2013
Location: Tecumseh
Posts: 338
Re: Simplest DBW cruise control wiring

I got a pack of 10 for about $15 on flea bay. They sell both kinds.
__________________
Project GEZR WGN Volvo
FMCDH
GBU and GBA

http://www.youtube.com/user/aknovaman/videos
aknovaman is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:01 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com