finally come - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pimpston65** · 01-08-2018, 09:02 PM

got a new hoist to left the front end in order to suspend the floor for removal. the back end is already blocked up high enough the pull the rear receiver.

**pimpston65** · 01-10-2018, 01:09 PM

the biggest box i got thus far, guess a full floor pan will do that!!! pics to come unboxed

Bomp · 01-10-2018, 03:49 PM

Whoa, that's a big box. Glad to see its from LMC. Heard if there's any problems they'll stand behind their word and make things right.
Can't wait for the pics.

**60-66** · 01-10-2018, 09:08 PM

They make Suburban floors now ?

**pimpston65** · 01-10-2018, 09:33 PM

Quote:

Originally Posted by Bomp

Whoa, that's a big box. Glad to see its from LMC. Heard if there's any problems they'll stand behind their word and make things right.
Can't wait for the pics.

thats what i thought as well.

**pimpston65** · 01-10-2018, 09:37 PM

Quote:

Originally Posted by 60-66

They make Suburban floors now ?

i wish, its a pickup floor. i have the rear support for a burb from Az. from rocker to rocker with enough to graft to the rear floor pass'd the support and enough to graft to the new pan. i will need to cut the pickup rear cab support out and use the burb support. i will put a few pics to show my crazy plan...

**pimpston65** · 01-10-2018, 09:42 PM

should be enough to graft from both sides this is the burb it came from, saw it in person during thanksgiving!!!

lower50's · 01-11-2018, 09:23 AM

Cool!!! I have bought stuff from LMC. I liked it all.

**sirJim** · 01-11-2018, 10:03 AM

Looks good just dont let it get away from you. Hope you are bracing it so you keep the measurement right.

**pimpston65** · 01-11-2018, 10:24 AM

Quote:

Originally Posted by sirJim

Looks good just dont let it get away from you. Hope you are bracing it so you keep the measurement right.

i got it tied at the a and d post had a buddy weld it up good...

**pimpston65** · 01-11-2018, 10:28 AM

unboxed

**pimpston65** · 01-11-2018, 10:30 AM

Even has the firewall flange

**pimpston65** · 01-11-2018, 10:32 AM

spot weldes are nice, i will delete the two on the cab brace.

**pimpston65** · 01-11-2018, 10:36 AM

the rockers will be the last piece off, then the new ones right back on. im working from the inside out to keep it tied while keeping know reference point.

**sirJim** · 01-11-2018, 10:41 AM

Nice

Bomp · 01-11-2018, 12:30 PM

Looks like you are ready for "this weekends project".

**pimpston65** · 01-19-2018, 09:02 PM

its the weekend!!! so here's todays value added task. i got tube 7' of 2.5x2.5 with 3/8 wall thnkness ima slot it in 2 spots so a link can slip in and cross pin it with a bolt say half down. the tube will lift from under the cross bars i have bolted to the a and b pilar.

**pimpston65** · 01-29-2018, 02:44 PM

one 1/2" drill bit and a cutoff wheel later, it works. now i can lift the front off frame. i will come up with a second way to hold it in the air for safety!!!

Bomp · 01-29-2018, 09:10 PM

Always good when it works. That right there is a WIN

**pimpston65** · 01-29-2018, 09:57 PM

Quote:

Originally Posted by Bomp

Always good when it works. That right there is a WIN

sure is a Win. hope to start peeling back the layers soon...

lower50's · 01-30-2018, 08:10 AM

Great idea

awbrown · 02-07-2018, 08:21 AM

Looks like I need to visit and see what you have going on !!!

**pimpston65** · 02-07-2018, 12:13 PM

Quote:

Originally Posted by awbrown

Looks like I need to visit and see what you have going on !!!

Heck yeah you do...

**pimpston65** · 03-18-2018, 01:18 PM

found this awesome nos suburban bumper today!!!

**pimpston65** · 03-18-2018, 01:19 PM

Got dimples?

01-08-2018, 09:02 PM	#451
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come got a new hoist to left the front end in order to suspend the floor for removal. the back end is already blocked up high enough the pull the rear receiver. Attached Images

01-10-2018, 01:09 PM	#452
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come the biggest box i got thus far, guess a full floor pan will do that!!! pics to come unboxed Attached Images

01-10-2018, 03:49 PM	#453
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: finally come Whoa, that's a big box. Glad to see its from LMC. Heard if there's any problems they'll stand behind their word and make things right. Can't wait for the pics.

01-10-2018, 09:08 PM	#454
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,322	Re: finally come They make Suburban floors now ? __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

01-10-2018, 09:42 PM	#457
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come should be enough to graft from both sides this is the burb it came from, saw it in person during thanksgiving!!! Attached Images Last edited by pimpston65; 01-10-2018 at 10:28 PM.

01-11-2018, 09:23 AM	#458
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: finally come Cool!!! I have bought stuff from LMC. I liked it all. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

01-11-2018, 10:03 AM	#459
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 304	Re: finally come Looks good just dont let it get away from you. Hope you are bracing it so you keep the measurement right. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

01-11-2018, 10:28 AM	#461
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come unboxed Attached Images

01-11-2018, 10:30 AM	#462
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come Even has the firewall flange Attached Images

01-11-2018, 10:32 AM	#463
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come spot weldes are nice, i will delete the two on the cab brace. Attached Images

01-11-2018, 10:36 AM	#464
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come the rockers will be the last piece off, then the new ones right back on. im working from the inside out to keep it tied while keeping know reference point.

01-11-2018, 10:41 AM	#465
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 304	Re: finally come Nice __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

01-11-2018, 12:30 PM	#466
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: finally come Looks like you are ready for "this weekends project".

01-19-2018, 09:02 PM	#467
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come its the weekend!!! so here's todays value added task. i got tube 7' of 2.5x2.5 with 3/8 wall thnkness ima slot it in 2 spots so a link can slip in and cross pin it with a bolt say half down. the tube will lift from under the cross bars i have bolted to the a and b pilar. Attached Images

01-29-2018, 02:44 PM	#468
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come one 1/2" drill bit and a cutoff wheel later, it works. now i can lift the front off frame. i will come up with a second way to hold it in the air for safety!!! Attached Images



Register or Log In To remove these advertisements.

01-29-2018, 09:10 PM	#469
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: finally come Always good when it works. That right there is a *WIN*

01-30-2018, 08:10 AM	#471
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: finally come Great idea __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

02-07-2018, 08:21 AM	#472
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: finally come Looks like I need to visit and see what you have going on !!!

03-18-2018, 01:18 PM	#474
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come found this awesome nos suburban bumper today!!! Attached Images

03-18-2018, 01:19 PM	#475
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: finally come Got dimples? Attached Images

Register or Log In To remove these advertisements.