2nd Gen lift on 1st Gen truck?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970Jimmy · 09-29-2003, 02:51 PM

Has anyone done this?? Can it even be done? Pros / Cons?
Thanks,
Jamey

1970Jimmy · 09-29-2003, 02:52 PM

Sorry for the double post! When I first checked back the first one had not posted yet!

6772king · 09-29-2003, 04:51 PM

are you talking about a 73 and up lift on a 67-72???? if so do you know that the front springs are longer on a 73 and up? you have to move all of you shackles. the pro's they say the longer the spring the better the ride---- cons alot of work IMO it's not worth it if this is what you are talking about Buy the way the rear is the same

**MJN** · 09-29-2003, 09:22 PM

I've got a six inch lift, front springs and rear blocks of you're interested in one made for one of these trucks. I might have shocks too not sure. Not sure on shipping either.

LeRoy · 09-30-2003, 12:27 AM

How much do you want for the lift if 1970JIMMY doesn't want it. Details? Thanks in advance

**MJN** · 09-30-2003, 04:29 PM

I'd probably have to get around $150 for everything, I have shocks that came with it, they aren't new but they are good yet, four (4) Doesch (?) Tech hydraulic shocks and two (2) Skyjacker Nitros. I'm not sure what brand the lift is, but am leaning toward Skyjacker. I don't have u-bolts just the front springs, rear blocks, and the shocks. Thanks

LeRoy · 10-01-2003, 02:32 AM

Any idea how old they are and if they sagged any. Are you sure they are 6" lift springs. Was this in one of your drivers. I'm looking for a skyjacker lift but don't want any superlift stuff. I've already got u-bolts so that's no problem. Could you figure shipping to 98273. Thanks in advance

**MJN** · 10-01-2003, 10:02 AM

I don't think it sagged any, it is a six inch lift, the blocks match all my other six inch's. Yes it was in my Blazer when we bought it. I'm not sure how old it is, it's been sitting on the racks for about four years. Do you want all six shocks? I'll check on shipping it will be a little spendy from Wi. to Wa. thanks

09-29-2003, 02:51 PM	#1
1970Jimmy Registered User Join Date: Aug 2002 Location: Chattanooga, TN Posts: 21	2nd Gen lift on 1st Gen truck?? Has anyone done this?? Can it even be done? Pros / Cons? Thanks, Jamey __________________ 70 Jimmy, 3spd, Dana 20, 35x12.50 X-Terrains, 3/4 Ton running gear w/ 4.56's and Detroits, BestTop soft top

09-29-2003, 02:52 PM	#2
1970Jimmy Registered User Join Date: Aug 2002 Location: Chattanooga, TN Posts: 21	Sorry for the double post! When I first checked back the first one had not posted yet! __________________ 70 Jimmy, 3spd, Dana 20, 35x12.50 X-Terrains, 3/4 Ton running gear w/ 4.56's and Detroits, BestTop soft top

09-29-2003, 04:51 PM	#3
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	are you talking about a 73 and up lift on a 67-72???? if so do you know that the front springs are longer on a 73 and up? you have to move all of you shackles. the pro's they say the longer the spring the better the ride---- cons alot of work IMO it's not worth it if this is what you are talking about Buy the way the rear is the same __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

09-30-2003, 12:27 AM	#5
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	How much do you want for the lift if 1970JIMMY doesn't want it. Details? Thanks in advance __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

10-01-2003, 02:32 AM	#7
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	Any idea how old they are and if they sagged any. Are you sure they are 6" lift springs. Was this in one of your drivers. I'm looking for a skyjacker lift but don't want any superlift stuff. I've already got u-bolts so that's no problem. Could you figure shipping to 98273. Thanks in advance __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

09-29-2003, 09:22 PM	#4
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,963	I've got a six inch lift, front springs and rear blocks of you're interested in one made for one of these trucks. I might have shocks too not sure. Not sure on shipping either.

09-30-2003, 04:29 PM	#6
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,963	I'd probably have to get around $150 for everything, I have shocks that came with it, they aren't new but they are good yet, four (4) Doesch (?) Tech hydraulic shocks and two (2) Skyjacker Nitros. I'm not sure what brand the lift is, but am leaning toward Skyjacker. I don't have u-bolts just the front springs, rear blocks, and the shocks. Thanks

10-01-2003, 10:02 AM	#8
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,963	I don't think it sagged any, it is a six inch lift, the blocks match all my other six inch's. Yes it was in my Blazer when we bought it. I'm not sure how old it is, it's been sitting on the racks for about four years. Do you want all six shocks? I'll check on shipping it will be a little spendy from Wi. to Wa. thanks __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.