CA 1971/72 Chevrolet C10 Long Bed part out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 09-27-2011, 12:20 AM

Got at it a bit today...removed front clip for better view of the firewall area...and removed the MC and just used a hand wire brush to clean away the surface rust. Here are a few pics, the rest have not make it into my photobucket...I will post them tomorrow..

Quote:

Originally Posted by b&a72

Sounds good thanks buddy!

*project 67 sub* · 09-27-2011, 04:51 AM

this thing really is in good shape guys, seen it yesterday in person, and all i gotta say is that it really is super solid, only rust through that i seen is the one spot in the front windshield roof area, and the inside kick panel area. didn't notice any other rust anywhere else from what i could see. this will be a good buy for someone for sure, heck i wish my burb was this clean

good luck with the sale Adam...

bigyellow · 09-27-2011, 10:25 AM

how much for the front driveshaft? and was it an automatic?

*project 67 sub* · 09-27-2011, 01:30 PM

it was a stick shift, it was a 6 cyl truck and it had i believe a granny low 4 spd

budnikguy · 09-27-2011, 01:44 PM

More detail pics of the cab for b&a72 ....and everyone else...lol

budnikguy · 09-27-2011, 01:55 PM

and more detailed pics of the bed....

budnikguy · 09-27-2011, 02:05 PM

D.PASSMORE I am sorry I just do not have the time currently to take it apart and seel just the bed sides, will have to keep it complete...again sorry.

BillHilly I am sure we could work out a delivery there, as long as you can take care of gas and trailer cost...get me exact address so I can figure length of drive if you are interested!

Thanks
Adam

Billhilly · 09-27-2011, 04:10 PM

Address is 1400 Glenn Curtiss Street, Carson. Right on the corner of South Central Ave. Bedsides look great. So no real rust in the bed corners or anywhere? Couple more pics of the bed itself would be great. Wait and see what D.PASSMORE says. Thanks.
Oh, need a GMC stamped tailgate to go with this. Any ideas?

budnikguy · 09-27-2011, 06:00 PM

ok, cool. On Monday I will be removing the cab and unbolting the bed..and should be able to get more detailed pics for you. Might be able to help with a gate too...what year GMC gate are you looking for (small lettering or large) or does it matter?!

Quote:

Originally Posted by Billhilly

Address is 1400 Glenn Curtiss Street, Carson. Right on the corner of South Central Ave. Bedsides look great. So no real rust in the bed corners or anywhere? Couple more pics of the bed itself would be great. Wait and see what D.PASSMORE says. Thanks.
Oh, need a GMC stamped tailgate to go with this. Any ideas?

Billhilly · 09-27-2011, 07:52 PM

Quote:

Originally Posted by budnikguy

Might be able to help with a gate too...what year GMC gate are you looking for (small lettering or large) or does it matter?!

My truck is a '72 so yeah, large lettering.
The one other piece I was looking for was a transfer case cross member. I wanted to make up a skid plate deal and believe the origonal ones used basically two cross members.
Talk next week. Thanks.

niterider65 · 09-27-2011, 10:16 PM

Hi is there a sway bar set up on the truck ?? id so what would you want for it shipped to 76034
Thanks

Bill

budnikguy · 09-27-2011, 10:23 PM

front or rear?!

Quote:

Originally Posted by niterider65

Hi is there a sway bar set up on the truck ?? id so what would you want for it shipped to 76034
Thanks

Bill

niterider65 · 09-27-2011, 10:29 PM

the front sway bar and the frame mounts .

budnikguy · 09-27-2011, 10:38 PM

Yeah, already have it removed form the truck...$40.00 plus the ride...figure ride at 13.00...

niterider65 · 09-27-2011, 10:55 PM

cool ill take it

budnikguy · 10-03-2011, 11:05 PM

More detailed pictures of the cab after removal...

budnikguy · 10-03-2011, 11:15 PM

And bed removed for more detailed pics also, did a wash down and discovered light surface on the floor. Under bed shots show well, and some of the undercoating is flaking off, so, I scraped a bit of it off to show nice original red paint! Stake pocket holes look great and front header panel in nice with a few dents....

Adam
951-544-0721

budnikguy · 10-03-2011, 11:18 PM

btw, anyone need anything off of this bare frame? It was a c10 long bed with a straight six... trailing arm crossmember mid crossmember, rear crossmember??

Billhilly · 10-04-2011, 02:11 AM

Bed looks great. Let me ring the shipping guy again tomorrow to double check the details and then I'll get straight back in touch with you.

budnikguy · 10-05-2011, 01:43 PM

Any update? Another local member has expressed interest....Thanks

Quote:

Originally Posted by Billhilly

Bed looks great. Let me ring the shipping guy again tomorrow to double check the details and then I'll get straight back in touch with you.

budnikguy · 10-25-2011, 03:43 PM

And made it to your shipper......hope you put it to good use in New Zealand

Quote:

Originally Posted by Billhilly

Bed looks great. Let me ring the shipping guy again tomorrow to double check the details and then I'll get straight back in touch with you.

*project 67 sub* · 10-25-2011, 04:01 PM

sweet....... and across the pond it goes

onefun71 · 10-27-2011, 01:53 PM

Any knowledge on the condition of the frame? is it straight (for an old truck)? does it show any signs of stress or any cracks or cuts anywhere? and have you still not sold that cab?

budnikguy · 10-27-2011, 02:40 PM

Sorry frame is gone....playing back and forth game on the cab and doors, distance I am sure is the main cause.

Quote:

Originally Posted by onefun71

Any knowledge on the condition of the frame? is it straight (for an old truck)? does it show any signs of stress or any cracks or cuts anywhere? and have you still not sold that cab?

onefun71 · 10-27-2011, 04:35 PM

what a shame, if the cab was a 71 I would be up there this weekend to take it off your hands but my interest is slightly less being a 72 cab

09-27-2011, 04:51 AM	#52
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 1971/72 Chevrolet C10 Long Bed part out this thing really is in good shape guys, seen it yesterday in person, and all i gotta say is that it really is super solid, only rust through that i seen is the one spot in the front windshield roof area, and the inside kick panel area. didn't notice any other rust anywhere else from what i could see. this will be a good buy for someone for sure, heck i wish my burb was this clean good luck with the sale Adam...

09-27-2011, 10:25 AM	#53
bigyellow Registered User Join Date: Aug 2011 Location: Six-Mile, SC Posts: 153	Re: 1971/72 Chevrolet C10 Long Bed part out how much for the front driveshaft? and was it an automatic? __________________ Six in a row makes it go

09-27-2011, 01:30 PM	#54
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 1971/72 Chevrolet C10 Long Bed part out it was a stick shift, it was a 6 cyl truck and it had i believe a granny low 4 spd Last edited by project 67 sub; 09-27-2011 at 01:56 PM.

09-27-2011, 01:44 PM	#55
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1971/72 Chevrolet C10 Long Bed part out More detail pics of the cab for b&a72 ....and everyone else...lol Last edited by budnikguy; 09-27-2011 at 01:53 PM.

09-27-2011, 01:55 PM	#56
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1971/72 Chevrolet C10 Long Bed part out and more detailed pics of the bed....

09-27-2011, 02:05 PM	#57
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1971/72 Chevrolet C10 Long Bed part out D.PASSMORE I am sorry I just do not have the time currently to take it apart and seel just the bed sides, will have to keep it complete...again sorry. BillHilly I am sure we could work out a delivery there, as long as you can take care of gas and trailer cost...get me exact address so I can figure length of drive if you are interested! Thanks Adam

09-27-2011, 04:10 PM	#58
Billhilly Registered User Join Date: May 2001 Location: Wairarapa, New Zealand. Posts: 782	Re: 1971/72 Chevrolet C10 Long Bed part out Address is 1400 Glenn Curtiss Street, Carson. Right on the corner of South Central Ave. Bedsides look great. So no real rust in the bed corners or anywhere? Couple more pics of the bed itself would be great. Wait and see what D.PASSMORE says. Thanks. Oh, need a GMC stamped tailgate to go with this. Any ideas? __________________ 1972 K2500 Long Box 400/350

09-27-2011, 10:16 PM	#61
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 623	Re: 1971/72 Chevrolet C10 Long Bed part out Hi is there a sway bar set up on the truck ?? id so what would you want for it shipped to 76034 Thanks Bill

09-27-2011, 10:29 PM	#63
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 623	Re: 1971/72 Chevrolet C10 Long Bed part out the front sway bar and the frame mounts .

09-27-2011, 10:38 PM	#64
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1971/72 Chevrolet C10 Long Bed part out Yeah, already have it removed form the truck...$40.00 plus the ride...figure ride at 13.00...

09-27-2011, 10:55 PM	#65
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 623	Re: 1971/72 Chevrolet C10 Long Bed part out cool ill take it

10-03-2011, 11:05 PM	#66
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1971/72 Chevrolet C10 Long Bed part out More detailed pictures of the cab after removal...

10-03-2011, 11:15 PM	#67
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1971/72 Chevrolet C10 Long Bed part out And bed removed for more detailed pics also, did a wash down and discovered light surface on the floor. Under bed shots show well, and some of the undercoating is flaking off, so, I scraped a bit of it off to show nice original red paint! Stake pocket holes look great and front header panel in nice with a few dents.... Adam 951-544-0721

10-03-2011, 11:18 PM	#68
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1971/72 Chevrolet C10 Long Bed part out btw, anyone need anything off of this bare frame? It was a c10 long bed with a straight six... trailing arm crossmember mid crossmember, rear crossmember??

10-04-2011, 02:11 AM	#69
Billhilly Registered User Join Date: May 2001 Location: Wairarapa, New Zealand. Posts: 782	Re: 1971/72 Chevrolet C10 Long Bed part out Bed looks great. Let me ring the shipping guy again tomorrow to double check the details and then I'll get straight back in touch with you. __________________ 1972 K2500 Long Box 400/350



Register or Log In To remove these advertisements.

10-25-2011, 04:01 PM	#72
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 1971/72 Chevrolet C10 Long Bed part out sweet....... and across the pond it goes

10-27-2011, 01:53 PM	#73
onefun71 Registered User Join Date: Oct 2011 Location: Ramona, CA Posts: 18	Re: 1971/72 Chevrolet C10 Long Bed part out Any knowledge on the condition of the frame? is it straight (for an old truck)? does it show any signs of stress or any cracks or cuts anywhere? and have you still not sold that cab? __________________ ------------------------ 1965 c20 6.0ls 4l80e 1983 Honda cb900 custom

10-27-2011, 04:35 PM	#75
onefun71 Registered User Join Date: Oct 2011 Location: Ramona, CA Posts: 18	Re: 1971/72 Chevrolet C10 Long Bed part out what a shame, if the cab was a 71 I would be up there this weekend to take it off your hands but my interest is slightly less being a 72 cab __________________ ------------------------ 1965 c20 6.0ls 4l80e 1983 Honda cb900 custom

Register or Log In To remove these advertisements.