|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
11-10-2017, 03:30 PM
|
#1 |
|
A day late and $1 short...
Join Date: Dec 2008
Location: Northwest FL
Posts: 3,870
|
Help! Fittings for Wilwood Proportioning Valve
I'm trying to help a friend install a Wilwood master cylinder and proportioning valve in his '67. The truck has front discs from a '71 with the 5 lug swapped drums in the rear. We are attempting to attach the original 1/4" rear line to the rear port on the proportioning valve. I'm hoping someone has already done this and can help locating an adapter fitting. What I need is a 3/8"-18 male inverted flare to 7/16" female inverted flare. Any help would be greatly appreciated.
This fitting supplied with the M/C has the correct female side but the wrong male side, not inverted flare. Side view of the fitting with the wrong male side.
__________________
Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD Last edited by C10_ustacould; 11-10-2017 at 04:11 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode