The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-12-2019, 04:28 AM   #1
caspear1978
Registered User
 
Join Date: Sep 2012
Location: HIbbing,MN
Posts: 31
Rear wheel bearings.

So 2 months ago i had a slight mishap with my rearend. For some odd reason my limited slip decided it wanted to come apart on me.

Replaced the limited slip carrier with a posi locker. Cleaned out the hosing the best i could. Replaced wheel bearings and seals.

Fast forward 2 months. Have had no issues with the rearend till a week ago. Noticed new seals were leaking. Pull it all back apart to find out my bearings went out on me. Not just one side. But both. Truck is a daily driver. Driver an hour to and from work 6 days a week. So ive got a few thosand miles on the new bearing. Tried to stay off rough rounds. As much as possible. Not sure how the bearings could have gone bad this quick.

With the rear bearings the question is. To grease or not to grease. Wondering if the failure was do to not enough lube getting around the bearings.

First picture is driver side second picture is pass side.
Attached Images
  
caspear1978 is offline   Reply With Quote
Old 08-12-2019, 07:13 AM   #2
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 39,403
Re: Rear wheel bearings.

Wow, I don't think I have ever seen one like that. I would tend to think that is more than just not enough grease.
__________________
Bill

1981 GMC High Sierra SWB Stepside

Member of Louisiana Classic Truck Club (LCTC)
Board Vendors
Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
It's scary when you start making the same noises as your coffee maker.
Palf70Step is offline   Reply With Quote
Old 08-12-2019, 07:36 AM   #3
95 S_Trucker
Senior Member
 
95 S_Trucker's Avatar
 
Join Date: Oct 2009
Location: Lancaster, PA
Posts: 2,237
Re: Rear wheel bearings.

The bearings are lubricated by the gear oil in the differential.

What do the axle shafts look like? I will guess they are toast too.

Either existing metal got in there, the axle shafts were already damaged, or there wasn't enough oil in the differential.
__________________
-99 K2500 LS CCSB 7.4
-11 GMC 2500HD SLE CCSB 6.0
-96 C3500 HD 7.4 NV4500 Rollback
-85 K10 5.7 700r4
-78 K10 5.7 4 Speed
-90 ZR1 5.7 6 Speed
-62 Lincoln Sedan 430 Auto
-61 Lincoln Convertable 430 Auto


85 Project: http://67-72chevytrucks.com/vboard/s...d.php?t=368864

78 Big10 Project: http://67-72chevytrucks.com/vboard/s...d.php?t=383629

96 Project: http://67-72chevytrucks.com/vboard/s...d.php?t=614515
95 S_Trucker is offline   Reply With Quote
Old 08-14-2019, 01:12 AM   #4
caspear1978
Registered User
 
Join Date: Sep 2012
Location: HIbbing,MN
Posts: 31
Re: Rear wheel bearings.

The shafts are fine. The rearend had plenty of fluid up until the seals popped out from the bearings pressing them out. I installed new bearings yesterday. Before i installed the seals. I checked to see if there was any movement in my axles. Everything is still nice and tight. Im figuring i bought the wrong cheap set of bearing. I shouldnt have bought them off amazon.
caspear1978 is offline   Reply With Quote
Old 08-14-2019, 05:38 AM   #5
95 S_Trucker
Senior Member
 
95 S_Trucker's Avatar
 
Join Date: Oct 2009
Location: Lancaster, PA
Posts: 2,237
Re: Rear wheel bearings.

How can the axles be fine? They must have some kind of damage to them where they ride on the bearing.

The axles need to be smooth. No nicks, cuts, scratches, or gouges.
__________________
-99 K2500 LS CCSB 7.4
-11 GMC 2500HD SLE CCSB 6.0
-96 C3500 HD 7.4 NV4500 Rollback
-85 K10 5.7 700r4
-78 K10 5.7 4 Speed
-90 ZR1 5.7 6 Speed
-62 Lincoln Sedan 430 Auto
-61 Lincoln Convertable 430 Auto


85 Project: http://67-72chevytrucks.com/vboard/s...d.php?t=368864

78 Big10 Project: http://67-72chevytrucks.com/vboard/s...d.php?t=383629

96 Project: http://67-72chevytrucks.com/vboard/s...d.php?t=614515
95 S_Trucker is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com