just registered - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bull68gmcpanel · 12-06-2008, 03:33 PM

been looking here for ever i have a 68 gmc panel ill post pics as soon as i figure it out not very comp savy i was told my truck came from calf it is pretty solid just got it off frame ive had it for about 4 years now mabey in 4 more ill have it done

bull68gmcpanel · 12-06-2008, 03:48 PM

Name: panel small.jpg
Views: 231
Size: 22.3 KB

hope this works oh yea i also have a 71 k5 the beast

bull68gmcpanel · 12-06-2008, 04:06 PM

Name: 101_0001.jpg
Views: 233
Size: 67.7 KB

im trying

*project 67 sub* · 12-06-2008, 04:07 PM

to the board, you will find everything you need here and then some so good luck with your panel

bull68gmcpanel · 12-06-2008, 04:57 PM

Name: 100_0115.jpg
Views: 223
Size: 53.2 KB

thanks yall have already helped out a bunch im doing a frame off but it will be a driver was told it is kinda rare would like to know just how many gmc were made in 68 found some info on here about chevys but no gmc

Longhorn Man · 12-06-2008, 05:27 PM

there are no GMC production numbers for the ones sold in the U.S., they are claimed to have been lost in a fire.

**special-K** · 12-06-2008, 06:38 PM

Greetings!Welcome to the site!!

bull68gmcpanel · 12-07-2008, 04:31 AM

so should i hold on to this one

Longhorn Man · 12-07-2008, 11:32 AM

Panels are pretty much rare these days anyways... they were made in somewhat low numbers, but few lived through there working years. Add to the mix that yours is a GMC, which the accepted figure is one GMC for every 3 chevys, you have a fairly rare bird there.
I'd keep it. But I'd keep it regardless of how rare it is honestly

Long Roof · 12-07-2008, 11:49 AM

Welcome from ohio. Sweet panel. What all you planning for the rebuild? You should start a project thread so we can watch the progress.

bull68gmcpanel · 12-07-2008, 11:59 AM

my plans are directly relative to my funds I just got it off the frame need to get frame apart for blasting prob going with slight drop still will tow harley with it and will drive it the body needs rockers and as far as i can tell just some lower patches she is pretty solid floors good going for clean look nothing fancy I will do the thread thing i got a crap load of pics and will document the whole thing

robb67 · 12-07-2008, 10:35 PM

Welcome! I'm ripping into a 68 Chevy Panel and it is coming off the frame shortly. Mine is in rougher shape than yours appears though...too many Canadian winters, I guess. It'll be nice to watch your progress and see some pics. Looks like a beauty.

vectorit · 12-07-2008, 10:54 PM

Welcome! Cool panel ya got too!

shaneschevys · 12-08-2008, 01:20 PM

Welcome From FT Worth TX. Nice panel!! Keep us posted on your progress.

bull68gmcpanel · 12-11-2008, 01:01 PM

getting there Name: frame off.jpg
Views: 223
Size: 42.5 KB

Richard8971 · 12-11-2008, 01:04 PM

Nice panel, and welcome to the site. I would love to get ahold of a 67-68 panel. I would even trade my stepper for one!

Don

bull68gmcpanel · 12-11-2008, 03:08 PM

Thanks i will try to do a build thread from day 1 have tons of pic s and havent really started yet. Cant wait to get mine to where yours is thats a sweet truck

GIZZ · 12-16-2008, 03:23 AM

Quote:

Originally Posted by bull68gmcpanel

getting thereAttachment 411237

did you and your buds just lift off the body and walk it over to the dolly? or did you use anything? any pictures of the body coming off?

bull68gmcpanel · 12-17-2008, 08:54 PM

did it by myself engine hoist up front and two farm jacks from tractor supply braced just a bit then rolled the frame out and slowly lowered body onto dolly

12-06-2008, 03:33 PM	#1
bull68gmcpanel Registered User Join Date: Dec 2008 Location: middle tennessee Posts: 15	just registered been looking here for ever i have a 68 gmc panel ill post pics as soon as i figure it out not very comp savy i was told my truck came from calf it is pretty solid just got it off frame ive had it for about 4 years now mabey in 4 more ill have it done

12-06-2008, 03:48 PM	#2
bull68gmcpanel Registered User Join Date: Dec 2008 Location: middle tennessee Posts: 15	Re: just registered hope this works oh yea i also have a 71 k5 the beast

12-06-2008, 04:06 PM	#3
bull68gmcpanel Registered User Join Date: Dec 2008 Location: middle tennessee Posts: 15	Re: just registered im trying

12-06-2008, 04:07 PM	#4
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: just registered to the board, you will find everything you need here and then some so good luck with your panel Last edited by project 67 sub; 12-06-2008 at 04:07 PM.

12-06-2008, 04:57 PM	#5
bull68gmcpanel Registered User Join Date: Dec 2008 Location: middle tennessee Posts: 15	Re: just registered thanks yall have already helped out a bunch im doing a frame off but it will be a driver was told it is kinda rare would like to know just how many gmc were made in 68 found some info on here about chevys but no gmc

12-06-2008, 05:27 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: just registered there are no GMC production numbers for the ones sold in the U.S., they are claimed to have been lost in a fire.

12-06-2008, 06:38 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: just registered Greetings!Welcome to the site!! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-07-2008, 04:31 AM	#8
bull68gmcpanel Registered User Join Date: Dec 2008 Location: middle tennessee Posts: 15	Re: just registered so should i hold on to this one

12-07-2008, 11:32 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: just registered Panels are pretty much rare these days anyways... they were made in somewhat low numbers, but few lived through there working years. Add to the mix that yours is a GMC, which the accepted figure is one GMC for every 3 chevys, you have a fairly rare bird there. I'd keep it. But I'd keep it regardless of how rare it is honestly

12-07-2008, 11:49 AM	#10
Long Roof Old School, New Style Join Date: Jun 2005 Location: Monroeville, Ohio Posts: 790	Re: just registered Welcome from ohio. Sweet panel. What all you planning for the rebuild? You should start a project thread so we can watch the progress. __________________ The Good: - 72 GMC Jimmy 4x4 - 307 cid / 350 th - 70 Chevy Suburban 1/2T 2wd - 454 cid /400 th - 96 Chevy Impala SS - mainly stock - 98 Chevy Tahoe LT 4x4 - all stock The Bad: - 86 Chevy Suburban 1/2T 4x4 - winter beater The Ugly: - 72 Chevy Suburban 1/2T 2wd - parts truck Last edited by Long Roof; 12-07-2008 at 11:49 AM.

12-07-2008, 11:59 AM	#11
bull68gmcpanel Registered User Join Date: Dec 2008 Location: middle tennessee Posts: 15	Re: just registered my plans are directly relative to my funds I just got it off the frame need to get frame apart for blasting prob going with slight drop still will tow harley with it and will drive it the body needs rockers and as far as i can tell just some lower patches she is pretty solid floors good going for clean look nothing fancy I will do the thread thing i got a crap load of pics and will document the whole thing

12-07-2008, 10:35 PM	#12
robb67 Registered User Join Date: Aug 2008 Location: Brentwood Bay, BC Posts: 252	Re: just registered Welcome! I'm ripping into a 68 Chevy Panel and it is coming off the frame shortly. Mine is in rougher shape than yours appears though...too many Canadian winters, I guess. It'll be nice to watch your progress and see some pics. Looks like a beauty.

12-07-2008, 10:54 PM	#13
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: just registered Welcome! Cool panel ya got too! __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

12-08-2008, 01:20 PM	#14
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: just registered Welcome From FT Worth TX. Nice panel!! Keep us posted on your progress. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

12-11-2008, 01:01 PM	#15
bull68gmcpanel Registered User Join Date: Dec 2008 Location: middle tennessee Posts: 15	Re: just registered getting there



Register or Log In To remove these advertisements.

12-11-2008, 01:04 PM	#16
Richard8971 Still livin the "dream" in '54 Join Date: Nov 2006 Location: Tucson, AZ Posts: 2,656	Re: just registered Nice panel, and welcome to the site. I would love to get ahold of a 67-68 panel. I would even trade my stepper for one! Don __________________ Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo

12-11-2008, 03:08 PM	#17
bull68gmcpanel Registered User Join Date: Dec 2008 Location: middle tennessee Posts: 15	Re: just registered Thanks i will try to do a build thread from day 1 have tons of pic s and havent really started yet. Cant wait to get mine to where yours is thats a sweet truck

12-17-2008, 08:54 PM	#19
bull68gmcpanel Registered User Join Date: Dec 2008 Location: middle tennessee Posts: 15	Re: just registered did it by myself engine hoist up front and two farm jacks from tractor supply braced just a bit then rolled the frame out and slowly lowered body onto dolly

Register or Log In To remove these advertisements.