Insert for 69-70 front turnsignals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotrod70C10 · 02-17-2003, 06:25 PM

I made a set of front turn signal inserts that look like bowties today. I haven't seen them in the dark yet but the are somewhat similar to the LED bowties that were posted on the board earlier. I will get some pics and post them tonight.

knucklebuster · 02-17-2003, 07:50 PM

sounds cool can't wait to see them

Hotrod70C10 · 02-17-2003, 08:54 PM

Ok, here's the scoop on my little project. The whole lens still lights up but the light is brighter where the bowtie is. I think it looks pretty cool myself. I'm waiting on my girlfriend to get the digital camera up here so I can use it.

Hotrod70C10 · 02-18-2003, 04:07 AM

Finally I got the pic of the insert that I made. This is a clear 69-70 turn signal lens like I posted earlier, The bulb still shines through the insert but it is brighter in the bowtie section. Tell me what you guys think!

Hotrod70C10 · 02-18-2003, 04:09 AM

sorry here it is!

knucklebuster · 02-18-2003, 07:51 AM

looks good to me.how much?

**1970 CST Short Wide** · 02-18-2003, 11:12 AM

Are you selling this item? If so how much, I'd like a set for my 70

**70cst** · 02-18-2003, 11:29 AM

Greetings Hotrod70C10...

I agree....you have done a good job with the turn signal lights. I to am interested in these lights. I want to get the LED lights from Reumster in the near future. This way I will have the back of the truck converted and your lights on the front would complement the LEDs. This board has a lot of great ideas!!!
Keep up the good work!!!

Reumster · 02-18-2003, 11:34 AM

Hotrod70C10

What LEDs are you using? Is the picture taken with the LEDs powered by a external source? Have you tested them in your truck yet?

E-mail me direct.

Hotrod70C10 · 02-18-2003, 04:17 PM

I didn't use led's it's just the dual filiment bulb that comes goes in the housing. You can do this with a sheet of vinyl it is an insert behind the actual lens itself. I can get a guy at a lettering shop to cut some for you guys if you are interested still. If so I will get you a price from him. By the way this pic is of the lens in my truck.

02-17-2003, 06:25 PM	#1
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	Insert for 69-70 front turnsignals I made a set of front turn signal inserts that look like bowties today. I haven't seen them in the dark yet but the are somewhat similar to the LED bowties that were posted on the board earlier. I will get some pics and post them tonight. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

02-17-2003, 07:50 PM	#2
knucklebuster Failure is NOT an option! Join Date: Feb 2003 Location: greenwood s.c. Posts: 811	sounds cool can't wait to see them __________________ House payment or truck parts?????.........why does life have to be so complicated? 1969 Chevy Shortbed Fleetside 1969 Camaro ps pb a/c(drove in high school now it's just a yard ornament,but it's next on the list for resto) 1990 Ni$$an hardbody( daily beater that has been really beaten!) 1999 Grand Am GT(wifes ride...never buy a pontiac!!Trust Me)

02-17-2003, 08:54 PM	#3
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	Ok, here's the scoop on my little project. The whole lens still lights up but the light is brighter where the bowtie is. I think it looks pretty cool myself. I'm waiting on my girlfriend to get the digital camera up here so I can use it. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

02-18-2003, 04:07 AM	#4
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	Finally I got the pic of the insert that I made. This is a clear 69-70 turn signal lens like I posted earlier, The bulb still shines through the insert but it is brighter in the bowtie section. Tell me what you guys think! __________________ 70' C-10 LWB Fleetside 4.5/6 drop

02-18-2003, 04:09 AM	#5
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	sorry here it is! __________________ 70' C-10 LWB Fleetside 4.5/6 drop

02-18-2003, 07:51 AM	#6
knucklebuster Failure is NOT an option! Join Date: Feb 2003 Location: greenwood s.c. Posts: 811	looks good to me.how much? __________________ House payment or truck parts?????.........why does life have to be so complicated? 1969 Chevy Shortbed Fleetside 1969 Camaro ps pb a/c(drove in high school now it's just a yard ornament,but it's next on the list for resto) 1990 Ni$$an hardbody( daily beater that has been really beaten!) 1999 Grand Am GT(wifes ride...never buy a pontiac!!Trust Me)

02-18-2003, 11:12 AM	#7
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,046	Are you selling this item? If so how much, I'd like a set for my 70 __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

02-18-2003, 11:29 AM	#8
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,339	GOOD JOB Greetings Hotrod70C10... I agree....you have done a good job with the turn signal lights. I to am interested in these lights. I want to get the LED lights from Reumster in the near future. This way I will have the back of the truck converted and your lights on the front would complement the LEDs. This board has a lot of great ideas!!! Keep up the good work!!!

02-18-2003, 11:34 AM	#9
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Hotrod70C10 What LEDs are you using? Is the picture taken with the LEDs powered by a external source? Have you tested them in your truck yet? E-mail me direct. __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

02-18-2003, 04:17 PM	#10
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	I didn't use led's it's just the dual filiment bulb that comes goes in the housing. You can do this with a sheet of vinyl it is an insert behind the actual lens itself. I can get a guy at a lettering shop to cut some for you guys if you are interested still. If so I will get you a price from him. By the way this pic is of the lens in my truck. __________________ 70' C-10 LWB Fleetside 4.5/6 drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.