68 K-10 SWB build thread - project Money Pit...pics galore! - Page 54 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ryanroo · 12-13-2014, 09:00 PM

the first one was a big buck mule. he left the big dent. the top bumper bracket is still bolted to the frame, and fate delt him poorly. got hooked and dragged for 1000' or so then mashed by both axles. i left him. the next was in traffic, so i didnt stop. there are tons of them this year.

msgross · 12-14-2014, 09:50 AM

that sucks, let me know if you need to find a new grill, I have two and will only be using one. Any more pics of your truck online?

ryanroo · 12-14-2014, 11:09 AM

it sucks, but it is a beater. one of the reasons i like driving around in old crusty stuff. doesnt hurt as bad when this happens. my tentative plan is to try and find a local desert 2wd truck that is in oe paint and use it as a body donor when i spruce it up. rebuld everything else nicely and have a patina k20. i dont know if i am going to try an keep it slant nosed or not, but i will get with you if i need a grille. thanks!

here is the resurrection thread on the yellow truck old and ugly

ther eis a link to my other truck in my signature line

**Dieselwrencher** · 12-15-2014, 03:34 AM

Nice deer! I didn't go out this weekend but hope to next weekend.

sourkraut · 12-15-2014, 09:23 AM

Congrats! Toby hit one but low so she is still around. Hopefully I can get one in second season of archery.

msgross · 12-15-2014, 01:06 PM

Quote:

Originally Posted by Dieselwrencher

Nice deer! I didn't go out this weekend but hope to next weekend.

thanks, had the tenderloin last night and again today at work... very tasty!

Quote:

Originally Posted by sourkraut

Congrats! Toby hit one but low so she is still around. Hopefully I can get one in second season of archery.

I'm not sure if i'm going back out. Ii do still have a buck and doe tag (for work) so I should.

msgross · 08-09-2015, 09:22 PM

well, not much action on the truck but I did hit the Carlisle truck show last week with a local board member, also ran into a few old timers from the board as well. Electricity is almost done in my shop so the urge to tinker is here again, but so is hunting season...

I wonder if I could pull the original skin off the doors I picked up, have them blasted, coat the inside and reweld the skin on... is it worth it? The doors are in nice shape except for interior surface rust and some creeping our from the seams...nothing to lose I guess. I found this pic on the Facebook page. Anyone reskin doors?

DWilbur · 08-11-2015, 02:40 AM

When Sky did my doors he had to replace the bottom of 2 doors and while he had them open he blasted them and primed them with epoxy primer. it is a lot of work to remove the skins to remove rust. if you have the time go for it.

msgross · 08-12-2015, 05:58 PM

Quote:

Originally Posted by DWilbur

When Sky did my doors he had to replace the bottom of 2 doors and while he had them open he blasted them and primed them with epoxy primer. it is a lot of work to remove the skins to remove rust. if you have the time go for it.

I'll take a closer look, I think the original skins would be toast after removing them...based on the videos i've seen. I'd hate to have rust creep out from the joint after a nice paint job though. I was just at Carlisle and could have picked up some cheap skins too... but didn't.

msgross · 09-13-2015, 08:06 PM

trying to determine if these doors are worth saving or I should just put the on craigslist. I have a nicer pass doors but need a nice driver door. These are loaded with soft-ray glass (which I have more of) so I should be able to get something for them. Thoughts?

msgross · 09-28-2015, 09:44 PM

Picked up a rust free drivers door in Carlisle today. Nice having a guy that deals in Arizona parts! He rolled into town yesterday after picking up parts in AZ.

Planning on getting both doors blasted and coat them in primer before I work on them. pics to follow.

DWilbur · 09-28-2015, 09:55 PM

That's good you found a rust free door. your driver door looks worst than my doors on the bottom and we still had to cut out part and clean out the rot.

msgross · 09-28-2015, 09:59 PM

That gold one could use a lower reskin and a bit of inner metal fix. Would be decent then.

I found an NOS door skin but @ $250 I passed. Opted for the $200 door that needs a little TLC.

DWilbur · 09-28-2015, 10:15 PM

That's good deal of the door. I have 2 front doors from my 71 and I can't get $100 for each as they have speaker holes cut in them.

BossH0G · 01-15-2016, 04:37 PM

Nice looking shop and the truck is coming along nicely also

msgross · 01-15-2016, 07:22 PM

Quote:

Originally Posted by DWilbur

That's good deal of the door. I have 2 front doors from my 71 and I can't get $100 for each as they have speaker holes cut in them.

Quote:

Originally Posted by BossH0G

Nice looking shop and the truck is coming along nicely also

Thanks... so I ended up selling both of my $35 doors for $100 each and bought a rust free, but rough, AZ door for $200. I'm currently installing insulation in the shop that I scored from our new roof at work. 65 sheets of 3" rigid insulation for free, used but in good shape.

msgross · 03-06-2016, 09:04 PM

Just found this on Ebay, not a bad price either. Pretty much identical to mine except for the wheels and seats. This is my goal, have my truck up and running for 2018 (50th year anniversary). I didn't buy this one, but someone can!

sourkraut · 03-09-2016, 12:17 AM

Quote:

Originally Posted by msgross

Just found this on Ebay, not a bad price either. Pretty much identical to mine except for the wheels and seats. This is my goal, have my truck up and running for 2018 (50th year anniversary). I didn't buy this one, but someone can!

Thats a sweet truck, good one for motivational purposes!

msgross · 03-09-2016, 06:23 PM

Quote:

Originally Posted by sourkraut

Thats a sweet truck, good one for motivational purposes!

I think it was a 71/72 with a 2WD 68 body on it. Didn't make its reserve at $14,800.

collin70k/20 · 04-05-2016, 03:33 PM

Awesome truck man keep up the good work! Hey since we live close to each other can i come by and try out your new shop lol. But seriously nice truck man!

msgross · 04-05-2016, 06:24 PM

Quote:

Originally Posted by collin70k/20

Awesome truck man keep up the good work! Hey since we live close to each other can i come by and try out your new shop lol. But seriously nice truck man!

thanks, shop is still a mess and waiting for wall insulation to be hung...

**aotte1** · 05-15-2016, 12:27 AM

Do you have any closeup pictures of your original cab clearance lights.

Thanks,
Les

msgross · 05-18-2016, 12:23 AM

Quote:

Originally Posted by aotte1

Do you have any closeup pictures of your original cab clearance lights.

Thanks,
Les

post 291 on page 15... I have the LMC set for sale if interested.

http://67-72chevytrucks.com/vboard/s...242910&page=15

msgross · 05-21-2016, 10:51 PM

Just picked up a nice door from a board member, came from OK with only 1 small area in the lower front inner corner... I swear that this is my last door...

73737373 · 05-23-2016, 10:51 AM

Hey Mike,

Hope all is well. Will be back in your area 3rd week of August.

The "Slim Jims" were delicious and greatly appreciated.

Cool little truck you've got.

12-13-2014, 09:00 PM	#1326
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! the first one was a big buck mule. he left the big dent. the top bumper bracket is still bolted to the frame, and fate delt him poorly. got hooked and dragged for 1000' or so then mashed by both axles. i left him. the next was in traffic, so i didnt stop. there are tons of them this year. __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

12-14-2014, 09:50 AM	#1327
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! that sucks, let me know if you need to find a new grill, I have two and will only be using one. Any more pics of your truck online? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

12-14-2014, 11:09 AM	#1328
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! it sucks, but it is a beater. one of the reasons i like driving around in old crusty stuff. doesnt hurt as bad when this happens. my tentative plan is to try and find a local desert 2wd truck that is in oe paint and use it as a body donor when i spruce it up. rebuld everything else nicely and have a patina k20. i dont know if i am going to try an keep it slant nosed or not, but i will get with you if i need a grille. thanks! here is the resurrection thread on the yellow truck old and ugly ther eis a link to my other truck in my signature line __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

12-15-2014, 03:34 AM	#1329
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,133	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Nice deer! I didn't go out this weekend but hope to next weekend. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-15-2014, 09:23 AM	#1330
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Congrats! Toby hit one but low so she is still around. Hopefully I can get one in second season of archery. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

08-09-2015, 09:22 PM	#1332
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! well, not much action on the truck but I did hit the Carlisle truck show last week with a local board member, also ran into a few old timers from the board as well. Electricity is almost done in my shop so the urge to tinker is here again, but so is hunting season... I wonder if I could pull the original skin off the doors I picked up, have them blasted, coat the inside and reweld the skin on... is it worth it? The doors are in nice shape except for interior surface rust and some creeping our from the seams...nothing to lose I guess. I found this pic on the Facebook page. Anyone reskin doors? Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-11-2015, 02:40 AM	#1333
DWilbur Registered User Join Date: Aug 2013 Location: San Jose Ca Posts: 965	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! When Sky did my doors he had to replace the bottom of 2 doors and while he had them open he blasted them and primed them with epoxy primer. it is a lot of work to remove the skins to remove rust. if you have the time go for it.

09-13-2015, 08:06 PM	#1335
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! trying to determine if these doors are worth saving or I should just put the on craigslist. I have a nicer pass doors but need a nice driver door. These are loaded with soft-ray glass (which I have more of) so I should be able to get something for them. Thoughts? Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-28-2015, 09:44 PM	#1336
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Picked up a rust free drivers door in Carlisle today. Nice having a guy that deals in Arizona parts! He rolled into town yesterday after picking up parts in AZ. Planning on getting both doors blasted and coat them in primer before I work on them. pics to follow. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-28-2015, 09:55 PM	#1337
DWilbur Registered User Join Date: Aug 2013 Location: San Jose Ca Posts: 965	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! That's good you found a rust free door. your driver door looks worst than my doors on the bottom and we still had to cut out part and clean out the rot.

09-28-2015, 09:59 PM	#1338
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! That gold one could use a lower reskin and a bit of inner metal fix. Would be decent then. I found an NOS door skin but @ $250 I passed. Opted for the $200 door that needs a little TLC. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-28-2015, 10:15 PM	#1339
DWilbur Registered User Join Date: Aug 2013 Location: San Jose Ca Posts: 965	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! That's good deal of the door. I have 2 front doors from my 71 and I can't get $100 for each as they have speaker holes cut in them.

01-15-2016, 04:37 PM	#1340
BossH0G Registered User Join Date: Dec 2015 Location: HixtonWI Posts: 33	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Nice looking shop and the truck is coming along nicely also

03-06-2016, 09:04 PM	#1342
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Just found this on Ebay, not a bad price either. Pretty much identical to mine except for the wheels and seats. This is my goal, have my truck up and running for 2018 (50th year anniversary). I didn't buy this one, but someone can! Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-05-2016, 03:33 PM	#1345
collin70k/20 Registered User Join Date: Feb 2015 Location: Schaefferstown, PA Posts: 202	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Awesome truck man keep up the good work! Hey since we live close to each other can i come by and try out your new shop lol. But seriously nice truck man! __________________ 1970 Chevy K/20 truck 350 4 speed. Soon putting in a mild built 400 small block. My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564



Register or Log In To remove these advertisements.

05-15-2016, 12:27 AM	#1347
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Do you have any closeup pictures of your original cab clearance lights. Thanks, Les

05-21-2016, 10:51 PM	#1349
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Just picked up a nice door from a board member, came from OK with only 1 small area in the lower front inner corner... I swear that this is my last door... Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

05-23-2016, 10:51 AM	#1350
73737373 Registered User Join Date: Sep 2005 Location: Oklahoma USA Posts: 1,000	Re: 68 K-10 SWB build thread - project Money Pit...pics galore! Hey Mike, Hope all is well. Will be back in your area 3rd week of August. The "Slim Jims" were delicious and greatly appreciated. Cool little truck you've got.

Register or Log In To remove these advertisements.