Heres My Next Project 68 C10,what A Poc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red69ss · 09-13-2007, 11:06 PM

Just Bought This Today For $400 The Guy Had Took It Apart And Then Quit On It (doesn't That Happen A Lot) Truck Is In Fair Shape Diffinently Worth Saving,he Said It Had 327 But Ran #'s Came Up 74 350 Also Has 3 Speed On Column I Don't Know What Bed Looks Like Yet Too Full Of Junk But I Seen Holes From Bottom,learned You Shouldn't Unload One By Yourself Since It Ran Off Side Of Trailer On Me,no Damage Other Than Trailer Light I Plan On Building This One And Then Selling Other One But Thats Going To Be A Long Time From Now.

red69ss · 09-13-2007, 11:07 PM

Couple More Pics

dan42 · 09-13-2007, 11:10 PM

Now that's a project - the cab needs a little work, I'd say -

bankone1 · 09-13-2007, 11:14 PM

never can get enough pictures so send more nice pickup

71swb4x4 · 09-13-2007, 11:16 PM

Looks like a decent place to start.

red69ss · 09-14-2007, 05:05 PM

wanted to add more pics guy told me last time he had bed clean it was straight that must have been in 1977 I knew it was gone but hoped to salvage bed sides now I don't know that I can use them

red69ss · 09-14-2007, 05:07 PM

yet more

72chevy327 · 09-14-2007, 05:43 PM

That box looks pretty bad better give it to me

whatnow123 · 09-14-2007, 06:07 PM

You are one brave soul to attempt to resurrect that truck, I have to commend you on that! That truck is way beyond anything I would ever consider building.

68SHORTBOX · 09-14-2007, 06:23 PM

I would check the casting # on that motor again some of the 350's used the same block as the 327. I have 2 of them. Check the casting date on the blocke you may just have a stock 327.

brianthelion02 · 09-14-2007, 06:37 PM

Its so nice bein from here where we dont have near the rust issues!!!!!I wouldnt even know where to start on that!!!

Quote:

Originally Posted by whatnow123

You are one brave soul to attempt to resurrect that truck, I have to commend you on that! That truck is way beyond anything I would ever consider building.

kxnomore · 09-14-2007, 07:54 PM

Well, no one can say you don't have a pair!

On first glance I thought it looked pretty good. I should have never scrolled down the posts!

You the man for saving the impossible (for me).

Select · 09-14-2007, 08:08 PM

Hmmm. Around here it would be headed to the scrap yard. I commend you for your effort to save yet another....Mikey

Premium72 · 09-14-2007, 08:30 PM

good luck with that....

red69ss · 09-14-2007, 08:54 PM

68 shortbox casting # is 3970010 which can be a 327 or 350 but I ran engine id #'s on pad and it came up 74 model 350 according to nastyz28 ......yeah guys it is rough after looking it over good today I believe the doors,cab,hood,and maybe bedsides will be only things useable hopefully the engine can be rebuilt but it is locked up right now.

bad6772 · 09-14-2007, 09:03 PM

Id say that would make a truck..........just needs a little TLC

LIVE RUST · 09-14-2007, 10:18 PM

Quote:

Originally Posted by whatnow123

You are one brave soul to attempt to resurrect that truck, I have to commend you on that! That truck is way beyond anything I would ever consider building.

Amen Johnson.

Stoney · 09-20-2007, 05:01 PM

Good Luck

72armyswbtruck · 09-22-2007, 07:38 AM

Quote:

Originally Posted by whatnow123

You are one brave soul to attempt to resurrect that truck, I have to commend you on that! That truck is way beyond anything I would ever consider building.

Yup, I commend you for attempting that restoration, I am super glad that you are doing it however, because everyone that is saved is awesome.

red69ss · 08-09-2008, 09:44 PM

made some progress today,been trying to get down to frame for weeks now but i have too many irons in the fire ,plus its been 99 degrees here hope i can really get moving on it this fall.

**88JRFAN** · 08-09-2008, 11:31 PM

Looks like someone ran it through a salt mine. Good luck to ya.

Cyclone44 · 08-10-2008, 01:51 AM

Good luck with your build....I will be checking back...

70LonghornCST · 08-10-2008, 02:10 AM

Salute! It is optimistic people like you who keep our trucks alive.

red69ss · 09-24-2008, 09:08 PM

did some sand blasting saturday thought i'd post some pics did it with pressure washing attachment(what a mess) I have decided there is no easy way to sandblast. it turned light orange before I was done blasting so i will have to go back and blast whole frame dry.

red69ss · 09-24-2008, 09:15 PM

couple bonus pics

09-13-2007, 11:06 PM	#1
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Heres My Next Project 68 C10,what A Poc Just Bought This Today For $400 The Guy Had Took It Apart And Then Quit On It (doesn't That Happen A Lot) Truck Is In Fair Shape Diffinently Worth Saving,he Said It Had 327 But Ran #'s Came Up 74 350 Also Has 3 Speed On Column I Don't Know What Bed Looks Like Yet Too Full Of Junk But I Seen Holes From Bottom,learned You Shouldn't Unload One By Yourself Since It Ran Off Side Of Trailer On Me,no Damage Other Than Trailer Light I Plan On Building This One And Then Selling Other One But Thats Going To Be A Long Time From Now. Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-13-2007, 11:07 PM	#2
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Heres My Next Project 68 C10,what A Poc Couple More Pics Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-13-2007, 11:10 PM	#3
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Heres My Next Project 68 C10,what A Poc Now that's a project - the cab needs a little work, I'd say - __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

09-13-2007, 11:14 PM	#4
bankone1 Registered User Join Date: Aug 2006 Location: Oklahoma City Posts: 212	Re: Heres My Next Project 68 C10,what A Poc never can get enough pictures so send more nice pickup

09-13-2007, 11:16 PM	#5
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Heres My Next Project 68 C10,what A Poc Looks like a decent place to start. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

09-14-2007, 05:05 PM	#6
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Heres My Next Project 68 C10,what A Poc wanted to add more pics guy told me last time he had bed clean it was straight that must have been in 1977 I knew it was gone but hoped to salvage bed sides now I don't know that I can use them Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-14-2007, 05:07 PM	#7
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Heres My Next Project 68 C10,what A Poc yet more Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-14-2007, 05:43 PM	#8
72chevy327 Registered User Join Date: Apr 2006 Location: edmonton ab ca Posts: 88	Re: Heres My Next Project 68 C10,what A Poc That box looks pretty bad better give it to me

09-14-2007, 06:07 PM	#9
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: Heres My Next Project 68 C10,what A Poc You are one brave soul to attempt to resurrect that truck, I have to commend you on that! That truck is way beyond anything I would ever consider building. __________________ 67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094

09-14-2007, 06:23 PM	#10
68SHORTBOX Registered User Join Date: Jul 2006 Location: El Cajon Ca Posts: 84	Re: Heres My Next Project 68 C10,what A Poc I would check the casting # on that motor again some of the 350's used the same block as the 327. I have 2 of them. Check the casting date on the blocke you may just have a stock 327. Last edited by 68SHORTBOX; 09-14-2007 at 06:23 PM.

09-14-2007, 07:54 PM	#12
kxnomore Registered User Join Date: Dec 2006 Location: CA Posts: 331	Re: Heres My Next Project 68 C10,what A Poc Well, no one can say you don't have a pair! On first glance I thought it looked pretty good. I should have never scrolled down the posts! You the man for saving the impossible (for me).

09-14-2007, 08:08 PM	#13
Select Friday's Toy Join Date: Nov 2006 Location: Ovilla, TX Posts: 574	Re: Heres My Next Project 68 C10,what A Poc Hmmm. Around here it would be headed to the scrap yard. I commend you for your effort to save yet another....Mikey __________________ 68 C10, SWB Fleetside with a 454, Turbo 400 and 4.11 posi....Exxon/Mobil loves me. 2009 Jeep Rubicon 2011 Powerstroke FX4 (totaled) 71 C10, SWB Fleet with factory tilt 72 LWB C10, 350 700R4 with factory tilt

09-14-2007, 08:30 PM	#14
Premium72 Registered User Join Date: Sep 2005 Location: Villa Rica Ga Posts: 889	Re: Heres My Next Project 68 C10,what A Poc good luck with that.... __________________ WombatFire, Art-Design-MADNESS Follow My Build and Adventures on Instagram

09-14-2007, 08:54 PM	#15
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Heres My Next Project 68 C10,what A Poc 68 shortbox casting # is 3970010 which can be a 327 or 350 but I ran engine id #'s on pad and it came up 74 model 350 according to nastyz28 ......yeah guys it is rough after looking it over good today I believe the doors,cab,hood,and maybe bedsides will be only things useable hopefully the engine can be rebuilt but it is locked up right now. __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-14-2007, 09:03 PM	#16
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,952	Re: Heres My Next Project 68 C10,what A Poc Id say that would make a truck..........just needs a little TLC



Register or Log In To remove these advertisements.

09-20-2007, 05:01 PM	#18
Stoney Farm Truck Join Date: Aug 2006 Location: Jersey Village, Texas Posts: 547	Re: Heres My Next Project 68 C10,what A Poc Good Luck __________________ 1969 CST/10 1984 K5 Blazer 4x4 2016 Dodge Ram 2500 4x4 Mike Jersey Village, Tx

08-09-2008, 09:44 PM	#20
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Heres My Next Project 68 C10,what A Poc made some progress today,been trying to get down to frame for weeks now but i have too many irons in the fire ,plus its been 99 degrees here hope i can really get moving on it this fall. Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-09-2008, 11:31 PM	#21
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Heres My Next Project 68 C10,what A Poc Looks like someone ran it through a salt mine. Good luck to ya. __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

08-10-2008, 01:51 AM	#22
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Heres My Next Project 68 C10,what A Poc Good luck with your build....I will be checking back...

08-10-2008, 02:10 AM	#23
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Heres My Next Project 68 C10,what A Poc Salute! It is optimistic people like you who keep our trucks alive. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

09-24-2008, 09:08 PM	#24
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Heres My Next Project 68 C10,what A Poc did some sand blasting saturday thought i'd post some pics did it with pressure washing attachment(what a mess) I have decided there is no easy way to sandblast. it turned light orange before I was done blasting so i will have to go back and blast whole frame dry. Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-24-2008, 09:15 PM	#25
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 851	Re: Heres My Next Project 68 C10,what A Poc couple bonus pics Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

Register or Log In To remove these advertisements.