Let's Hear your truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Robert Haas · 02-25-2019, 09:19 PM

Mine, single Holley 4 barrel on a Dart 427 SBC

Start up of our Shop Truck

Robert Haas · 02-27-2019, 07:11 PM

This place is just no fun at all.

**doug_p** · 02-27-2019, 08:25 PM

Sounds Sweet!

wshattuck · 02-27-2019, 09:19 PM

here you go Robert... with exhaust cutouts closed and open!

https://youtu.be/-HZUW7UxIns

**doug_p** · 02-27-2019, 09:25 PM

Gotta love a big block with open exhaust!

kens65fb · 02-28-2019, 12:04 PM

Quote:

Originally Posted by wshattuck

here you go Robert... with exhaust cutouts closed and open!

https://youtu.be/-HZUW7UxIns

Sounds fantastic

Your wheels are sharp, what size and make are wheels, and tires.?

Robert Haas · 02-28-2019, 03:03 PM

Quote:

Originally Posted by wshattuck

here you go Robert... with exhaust cutouts closed and open!

https://youtu.be/-HZUW7UxIns

Love me some Rat motor. I wish my motor would idle at 700 RPM like yours.

Thank you for making that cool video.

**Backpayne** · 02-28-2019, 08:31 PM

Quote:

Originally Posted by wshattuck

here you go Robert... with exhaust cutouts closed and open!

https://youtu.be/-HZUW7UxIns

I bet your truck hauls ass! I'm almost finished with my Olds 468 (455 .60 over) and cannot wait!

Mike Wessinger · 02-27-2019, 10:30 PM

Nothing fancy about mine. This was a cold start video I recorded shortly after my mechanic rebuilt the engine. Pretty much as close to original as the only "upgrade" I had at the time was the HEI. Since then, I have upgraded to an alternator, but otherwise it is still pretty basic.

1965 Chev C10 Cold Start

ImpalaJim · 02-27-2019, 11:17 PM

https://youtu.be/O8ZSru74DGQ

8 years ago still have it! that's a 66 model driving it to.

roll_the_dice · 02-28-2019, 09:54 AM

All sound good...Hope to add mine to the list of running trucks soon!

Wshattuk what muffler setup do you have? Sounds perfect...mine is a SBC but hope to make it rumble!

**LostMy65** · 02-28-2019, 08:16 PM

Nice Rumble

wshattuck · 02-28-2019, 08:55 PM

thanks guys... i love my trucks!

the mufflers are flowmasters but they arent the loud ones some maybe a series 50. I like that it can be civil on the hwy but when crusin its time to open the exhaust up.

the wheels are US Mags ramblers 20x8 and 20x9.5 both have 1mm offset. im running a 1.5 spacer on the rear since the 69 rearend is 3" overall narrower. tires are BFG 245.45.20 front and 275.40.20 rears...

yes sir it never passes a gas station without stopping.

will

straight6chevyguy · 02-28-2019, 09:35 PM

Let's here some more trucks guys!

And let's get some straight sixes in here! LOL

**Backpayne** · 02-28-2019, 09:49 PM

My 250:

https://youtu.be/putFEhPea0s

straight6chevyguy · 02-28-2019, 09:59 PM

sounds good!

Red66C10 · 02-28-2019, 10:21 PM

Here is my 66 with 6.0LS LQ9 and sloppy stage 2 cam
https://www.facebook.com/10000050216...34647357/?t=19

ImpalaJim · 03-11-2019, 06:40 AM

Quote:

Originally Posted by Red66C10

Here is my 66 with 6.0LS LQ9 and sloppy stage 2 cam
https://www.facebook.com/10000050216...34647357/?t=19

some of us don't flake book

straight6chevyguy · 03-11-2019, 03:39 PM

Quote:

Originally Posted by ImpalaJim

some of us don't flake book

I 2nd that!

The1960APE · 03-11-2019, 06:02 PM

Walk Around,
Skip White Built Dart 406, 524 hp / 525 Tq 700R4, 3:73 gear and a blast to drive full exhaust to the back bumper!

https://youtu.be/fRzNolD5qtw

**LostMy65** · 03-11-2019, 10:12 PM

Quote:

Originally Posted by straight6chevyguy

i 2nd that!

x3

1998c1500 · 02-28-2019, 10:23 PM

Here’s mine 2 owners before I bought it. I only know it was a 4 bolt main 350 crate motor with a Performer ePs intake, 600 CFM carb and 482624 heads(3 different valve sizes were available).

https://m.youtube.com/watch?v=4h4r7XzqUW8

kerber63 · 03-01-2019, 12:59 AM

Turbo’d 454 dumping out open 4” pipe.

https://youtu.be/yKQgS2rGT94

**LostMy65** · 03-11-2019, 10:17 PM

Quote:

Originally Posted by 1998c1500

Here’s mine 2 owners before I bought it. I only know it was a 4 bolt main 350 crate motor with a Performer ePs intake, 600 CFM carb and 482624 heads(3 different valve sizes were available).

https://m.youtube.com/watch?v=4h4r7XzqUW8

Clean truck. Nice sound.

**The Rocknrod** · 03-01-2019, 03:08 PM

I tried to make a video of my truck with me doing the engine sounds but my flip phone didn't record sound, so...

02-25-2019, 09:19 PM	#1
Robert Haas Registered User Join Date: Mar 2014 Location: Salinas Ca. Posts: 625	Let's Hear your truck Mine, single Holley 4 barrel on a Dart 427 SBC Start up of our Shop Truck

02-27-2019, 07:11 PM	#2
Robert Haas Registered User Join Date: Mar 2014 Location: Salinas Ca. Posts: 625	Re: Let's Hear your truck This place is just no fun at all.

02-27-2019, 08:25 PM	#3
doug_p Junior Member Join Date: Sep 2014 Location: Yorktown, VA Posts: 88	Re: Let's Hear your truck Sounds Sweet!

02-27-2019, 09:19 PM	#4
wshattuck Registered User Join Date: Dec 2013 Location: Dawsonville, GA Posts: 164	Re: Let's Hear your truck here you go Robert... with exhaust cutouts closed and open! https://youtu.be/-HZUW7UxIns __________________ 1969 C10, ZZ502, T400, A/C, WoodBed, Bucket Seats 1965 C10, 5.3LS, 4L60, Vintage Air, Woodbed

02-27-2019, 09:25 PM	#5
doug_p Junior Member Join Date: Sep 2014 Location: Yorktown, VA Posts: 88	Re: Let's Hear your truck Gotta love a big block with open exhaust!

02-27-2019, 10:30 PM	#9
Mike Wessinger Registered User Join Date: Nov 2000 Location: Chapin, South Carolina, USA Posts: 87	Re: Let's Hear your truck Nothing fancy about mine. This was a cold start video I recorded shortly after my mechanic rebuilt the engine. Pretty much as close to original as the only "upgrade" I had at the time was the HEI. Since then, I have upgraded to an alternator, but otherwise it is still pretty basic. 1965 Chev C10 Cold Start __________________ 1965 Chevy C10 Stepside Shortbed--2012 370Z Base Gun Metallic--2020 Chevy Silverado RST Crew Cab

02-27-2019, 11:17 PM	#10
ImpalaJim Registered User Join Date: May 2014 Location: Kewanee IL Posts: 283	Re: Let's Hear your truck https://youtu.be/O8ZSru74DGQ 8 years ago still have it! that's a 66 model driving it to.

02-28-2019, 09:54 AM	#11
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: Let's Hear your truck All sound good...Hope to add mine to the list of running trucks soon! Wshattuk what muffler setup do you have? Sounds perfect...mine is a SBC but hope to make it rumble! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

02-28-2019, 08:55 PM	#13
wshattuck Registered User Join Date: Dec 2013 Location: Dawsonville, GA Posts: 164	Re: Let's Hear your truck thanks guys... i love my trucks! the mufflers are flowmasters but they arent the loud ones some maybe a series 50. I like that it can be civil on the hwy but when crusin its time to open the exhaust up. the wheels are US Mags ramblers 20x8 and 20x9.5 both have 1mm offset. im running a 1.5 spacer on the rear since the 69 rearend is 3" overall narrower. tires are BFG 245.45.20 front and 275.40.20 rears... yes sir it never passes a gas station without stopping. will __________________ 1969 C10, ZZ502, T400, A/C, WoodBed, Bucket Seats 1965 C10, 5.3LS, 4L60, Vintage Air, Woodbed

02-28-2019, 09:35 PM	#14
straight6chevyguy Registered User Join Date: Dec 2018 Location: yamhill OR Posts: 785	Re: Let's Hear your truck Let's here some more trucks guys! And let's get some straight sixes in here! LOL __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1998 chevy c1500 4.3L 5speed (My current driver) 2002 Chevy s10 4.3L auto 4x4 1971 mercury monterey wagon 400 auto To many projects!

02-28-2019, 09:49 PM	#15
Backpayne Senior Member Join Date: Nov 2015 Location: Seligman, MO Posts: 620	Re: Let's Hear your truck My 250: https://youtu.be/putFEhPea0s

02-28-2019, 09:59 PM	#16
straight6chevyguy Registered User Join Date: Dec 2018 Location: yamhill OR Posts: 785	Re: Let's Hear your truck sounds good! __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1998 chevy c1500 4.3L 5speed (My current driver) 2002 Chevy s10 4.3L auto 4x4 1971 mercury monterey wagon 400 auto To many projects!

02-28-2019, 10:21 PM	#17
Red66C10 Registered User Join Date: Jun 2018 Location: Port Byron IL Posts: 47	Re: Let's Hear your truck Here is my 66 with 6.0LS LQ9 and sloppy stage 2 cam https://www.facebook.com/10000050216...34647357/?t=19

03-11-2019, 06:02 PM	#20
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: Let's Hear your truck Walk Around, Skip White Built Dart 406, 524 hp / 525 Tq 700R4, 3:73 gear and a blast to drive full exhaust to the back bumper! https://youtu.be/fRzNolD5qtw __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735

02-28-2019, 10:23 PM	#22
1998c1500 Registered User Join Date: Apr 2003 Location: Austin, Texas Posts: 200	Re: Let's Hear your truck Here’s mine 2 owners before I bought it. I only know it was a 4 bolt main 350 crate motor with a Performer ePs intake, 600 CFM carb and 482624 heads(3 different valve sizes were available). https://m.youtube.com/watch?v=4h4r7XzqUW8 __________________ 1965 C10 1967 Camaro 1998 C1500 2011 Colorado W/T



Register or Log In To remove these advertisements.

03-01-2019, 12:59 AM	#23
kerber63 Registered User Join Date: Nov 2011 Location: Salem, OR Posts: 280	Re: Let's Hear your truck Turbo’d 454 dumping out open 4” pipe. https://youtu.be/yKQgS2rGT94 __________________ 1963 C10 short-wide Turbocharged 454, T56, 4.11 posi http://67-72chevytrucks.com/vboard/s...d.php?t=605408 1963 C10 suburban Unknown, unknown, 3.73 open http://67-72chevytrucks.com/vboard/s...d.php?t=622037

03-01-2019, 03:08 PM	#25
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Let's Hear your truck I tried to make a video of my truck with me doing the engine sounds but my flip phone didn't record sound, so... Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.