NC 73-87 Quartz Clocks - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jd21476 · 08-30-2013, 01:28 AM

Still have any left?
Posted via Mobile Device

blessedfind · 08-30-2013, 09:52 PM

No, not at this moment. THanks for checking.

nolimitssjca · 03-25-2014, 04:37 AM

Hi Carl,

Do you have any clocks available?

blessedfind · 03-27-2014, 11:43 AM

Pm sent

**TKCR** · 10-27-2014, 01:00 PM

I am looking for a clock for my 86 C10. Do you have any available?

blessedfind · 10-28-2014, 08:18 PM

I think I do but I will check

**TKCR** · 10-28-2014, 09:07 PM

Thanks, just let me know

RUN GMC · 11-01-2014, 06:28 AM

I would like to know if you anymore available.....mine will adjust the time and the second hand moves but the minute & hour hands dont move.........thanks...

blessedfind · 11-07-2014, 12:03 PM

TKCR,
Sorry I have been out of town. Here is one I have at the moment.
RunGMC you can get it if TKCR doesn't want it.
$45.00 shipped

**TKCR** · 11-07-2014, 03:00 PM

Thanks for the reply. I was able to get a clock from a cluster I bought on eBay. So now I have addition spare parts if needed. So if anyone else needs the clock, I do not need it now.

RUN GMC · 11-07-2014, 05:14 PM

send paypal info please.....35773

1968vetL-71 · 11-07-2014, 07:59 PM

I'm needing the correct clock for my 91 crew cab silverado.

blessedfind · 11-09-2014, 10:48 PM

which cluster do you have? pic?

RUN GMC · 11-10-2014, 05:15 AM

I have the 6 pod cluster with a clock in the lower left hand of the 4 small hole section....at work send pic when i get home.

RUN GMC · 11-10-2014, 10:07 AM

Quote:

Originally Posted by blessedfind

which cluster do you have? pic?

Do you still need to see mine cluster or did I give a good enough description......I sent payment.....thanks............

blessedfind · 11-10-2014, 06:17 PM

I am good with yours. That was actually meant to be for 68vette. I am mailing yours out tomorrow.
Thanks

1968vetL-71 · 11-10-2014, 07:40 PM

its not the best photo. if you need a clearer shot let me know. I was just documenting my 4spd tilt/cruise column swap and wasn't concentrating on the gauges. thanks!

blessedfind · 11-10-2014, 08:24 PM

okay the clocks I have will work. I will check to see if I have another one. Give me a day or so to check and then bench test it.
thanks

blessedfind · 11-13-2014, 07:01 AM

RUN GMC yours is on the way. Here is the Tracking Number: 9400109699937039357720
Thanks and let me know if you have any problems.

blessedfind · 11-13-2014, 07:03 AM

1968vet I did find another one and tested it for 24 hrs with no problems. Let me know if you are still interested.
Thanks

1968vetL-71 · 11-13-2014, 08:30 AM

interested. can you post a pic? 45.00 shipped?

thanks for checking for me!!

blessedfind · 11-14-2014, 04:28 PM

1968vet
here is the one that was cleaned up and was tested for over 24 hrs.
$45 shipped.

1968vetL-71 · 11-14-2014, 09:50 PM

Did u post a pic?

RUN GMC · 11-14-2014, 09:57 PM

Quote:

Originally Posted by blessedfind

RUN GMC yours is on the way. Here is the Tracking Number: 9400109699937039357720
Thanks and let me know if you have any problems.

Thanks got mine today......thanks so much.............

blessedfind · 11-15-2014, 09:04 AM

1968vet...not sure why the pic did not load but here you go.

08-30-2013, 01:28 AM	#101
jd21476 Registered User Join Date: Aug 2013 Location: San Diego, CA Posts: 236	Re: 73-87 Quartz Clocks Still have any left? Posted via Mobile Device __________________ 1973 Chevy K20

08-30-2013, 09:52 PM	#102
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks No, not at this moment. THanks for checking.

03-25-2014, 04:37 AM	#103
nolimitssjca Registered User Join Date: Apr 2012 Location: San Jose, CA Posts: 69	Re: 73-87 Quartz Clocks Hi Carl, Do you have any clocks available?

03-27-2014, 11:43 AM	#104
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks Pm sent

10-27-2014, 01:00 PM	#105
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,858	Re: 73-87 Quartz Clocks I am looking for a clock for my 86 C10. Do you have any available?

10-28-2014, 08:18 PM	#106
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks I think I do but I will check

10-28-2014, 09:07 PM	#107
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,858	Re: 73-87 Quartz Clocks Thanks, just let me know

11-01-2014, 06:28 AM	#108
RUN GMC Registered User Join Date: May 2014 Location: North AL Posts: 363	Re: 73-87 Quartz Clocks I would like to know if you anymore available.....mine will adjust the time and the second hand moves but the minute & hour hands dont move.........thanks... __________________ http://i204.photobucket.com/albums/b...baae5d9a7e.jpg

11-07-2014, 12:03 PM	#109
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks TKCR, Sorry I have been out of town. Here is one I have at the moment. RunGMC you can get it if TKCR doesn't want it. $45.00 shipped Attached Images

11-07-2014, 03:00 PM	#110
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,858	Re: 73-87 Quartz Clocks Thanks for the reply. I was able to get a clock from a cluster I bought on eBay. So now I have addition spare parts if needed. So if anyone else needs the clock, I do not need it now.

11-07-2014, 05:14 PM	#111
RUN GMC Registered User Join Date: May 2014 Location: North AL Posts: 363	Re: 73-87 Quartz Clocks send paypal info please.....35773 __________________ http://i204.photobucket.com/albums/b...baae5d9a7e.jpg

11-07-2014, 07:59 PM	#112
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 73-87 Quartz Clocks I'm needing the correct clock for my 91 crew cab silverado. __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

11-09-2014, 10:48 PM	#113
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks which cluster do you have? pic?

11-10-2014, 05:15 AM	#114
RUN GMC Registered User Join Date: May 2014 Location: North AL Posts: 363	Re: 73-87 Quartz Clocks I have the 6 pod cluster with a clock in the lower left hand of the 4 small hole section....at work send pic when i get home. __________________ http://i204.photobucket.com/albums/b...baae5d9a7e.jpg

11-10-2014, 06:17 PM	#116
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks I am good with yours. That was actually meant to be for 68vette. I am mailing yours out tomorrow. Thanks



Register or Log In To remove these advertisements.

11-10-2014, 07:40 PM	#117
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 73-87 Quartz Clocks its not the best photo. if you need a clearer shot let me know. I was just documenting my 4spd tilt/cruise column swap and wasn't concentrating on the gauges. thanks! Attached Images __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

11-10-2014, 08:24 PM	#118
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks okay the clocks I have will work. I will check to see if I have another one. Give me a day or so to check and then bench test it. thanks

11-13-2014, 07:01 AM	#119
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks RUN GMC yours is on the way. Here is the Tracking Number: 9400109699937039357720 Thanks and let me know if you have any problems.

11-13-2014, 07:03 AM	#120
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks 1968vet I did find another one and tested it for 24 hrs with no problems. Let me know if you are still interested. Thanks

11-13-2014, 08:30 AM	#121
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 73-87 Quartz Clocks interested. can you post a pic? 45.00 shipped? thanks for checking for me!! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

11-14-2014, 04:28 PM	#122
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks 1968vet here is the one that was cleaned up and was tested for over 24 hrs. $45 shipped.

11-14-2014, 09:50 PM	#123
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 73-87 Quartz Clocks Did u post a pic? __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

11-15-2014, 09:04 AM	#125
blessedfind Registered User Join Date: Jan 2012 Location: Concord, NC Posts: 334	Re: 73-87 Quartz Clocks 1968vet...not sure why the pic did not load but here you go. Attached Images

Register or Log In To remove these advertisements.