DURG's Black 65 C10 - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DURG** · 11-24-2012, 11:45 PM

Quote:

Originally Posted by aggie91

I like your build. Are you going to leave the exterior alone?
Posted via Mobile Device

Yeah, I do have to weld up the spots on the rear quarters where someone had mounted a set of stepside type back up lights. That and the wheel tubs will need some black paint. Very bottom of front fenders need some work too.

Solo2002 · 11-25-2012, 12:16 AM

You have one awesome truck man love it

Posted via Mobile Device

mark 66 · 11-25-2012, 07:09 AM

Sharp truck.I think Id have a hard time going in the house.I would just want to sit out there and appreciate how its coming together.NICE

Texas Pugh · 11-25-2012, 07:55 PM

Truck is looking great and you are doing a good job partner.

**DURG** · 11-25-2012, 08:23 PM

Thanks all for the comments. I have tracking numbers for my front 20" Coys rims to be here Friday. I want to get this thing on the ground and set the frame heights and take a look.

Leadfoot Lambert · 11-25-2012, 08:28 PM

I can't wait to see it on the ground probably almost as much as you!

65shortbox · 11-28-2012, 07:21 PM

Great build! I have a 65 swb/bbw also. I REALLY like the portorbuild items and the static drop on your truck! I am currently working on an LS1/T56 conversion on my 67 camaro otherwise I'd tear the truck down and get the same suspension you have, very nice! I guess I'll have to wait and install those pieces when my 3 year old son enters high school, good father son project:-) BOTH of your classic vehicles look GREAT!

**DURG** · 12-01-2012, 12:37 AM

FINALLY have all my Coy's wheels mounted and on the truck. 22x9 and 20x8.5 I just put the fronts on tonight but have not checked/set frame heights yet. I got the bullet center caps with no Coy's emblems, just smooth and I will install them in the morning. They match the ones on my 62 Impala SS. This weekend I will adjust the coilovers to ride height so I can check out the stance.

Leadfoot Lambert · 12-01-2012, 09:51 AM

Looks Killer

gringoloco · 12-01-2012, 11:08 AM

She's got the look. Gonna be a great pair

65shortbox · 12-01-2012, 12:21 PM

Wow that looks great! Congratulations! Please post pics once you adjust final ride height...
Posted via Mobile Device

**DURG** · 12-01-2012, 02:50 PM

This is at 5-1/2" in the front and 6-1/2" in the rear as measured from the floor to underside of main frame rails directly below front and rear cab mounts. I have sent Nate my upper control arm and rear four link arm angles to get a recomendation. I also have been working on the rear bed frame some more gearing up for the wood install.

gringoloco · 12-01-2012, 03:59 PM

Man, I'm in love with this truck. Super clean execution

PBFAB.COM · 12-01-2012, 04:32 PM

Stance looks awesome! Great work Durg!

I will follow up on your email first of the week!
Posted via Mobile Device

**DURG** · 12-01-2012, 06:33 PM

Quote:

Originally Posted by Porterbuilt Street Rods

Stance looks awesome! Great work Durg!

I will follow up on your email first of the week!
Posted via Mobile Device

Thanks. Sounds good.

**DURG** · 12-01-2012, 06:33 PM

Quote:

Originally Posted by gringoloco

Man, I'm in love with this truck. Super clean execution

Thanks.

classic66 · 12-01-2012, 08:32 PM

durg

your truck looks sweet I was wondewring what size tires you put on your 20's and 22's
thanks

**DURG** · 12-01-2012, 11:27 PM

Quote:

Originally Posted by classic66

durg

your truck looks sweet I was wondering what size tires you put on your 20's and 22's
thanks

265-40-22 and 245-40-20 Nitto NT555 Extreme ZR

G Man · 12-02-2012, 12:41 AM

Thats Awesome.Nice work.What do you do for bump stomps or did I just not see them?Truck is looking great.Very nice thread.What drop are your Drop Spindles.My 64 chevy truck has been channeled 3.5 inches.I put 3. Droped Bell Spindels on and its too low at the A-Arms.

Dinos63 · 12-02-2012, 01:15 AM

great job just just went through the whole thread you nailed it !! nice craftsmanship also!!

**DURG** · 12-02-2012, 08:47 AM

Quote:

Originally Posted by Dinos63

great job just just went through the whole thread you nailed it !! nice craftsmanship also!!

Thanks! Doubt if it will ever make it out to one of your Git Downs though! Maine is just a little too far away.

**DURG** · 12-02-2012, 08:52 AM

Quote:

Originally Posted by G Man

Thats Awesome.Nice work.What do you do for bump stomps or did I just not see them?Truck is looking great.Very nice thread.What drop are your Drop Spindles.My 64 chevy truck has been channeled 3.5 inches.I put 3. Droped Bell Spindels on and its too low at the A-Arms.

Thanks! The bumpstops just thread up into the underside of the c-notch. They came with the porterbuilt kit. I hace the CPP modular spindles. 2"drop. I don't know if you reviewed the whole build thread but the truck has full Porterbuilt setup and the front is the Touring coilover version dropmember.

Solo2002 · 12-02-2012, 04:35 PM

that is just to cool

i want mine like that now

looks great you did a really good job

Bomp · 12-02-2012, 06:24 PM

Really following along on this.

65shortbox · 12-02-2012, 07:05 PM

You nailed that static stance! Curious how the ride quality will be compared to the bags on your Impala...
Posted via Mobile Device

11-25-2012, 12:16 AM	#152
Solo2002 Registered User Join Date: Aug 2012 Location: Bibb CO.Alabama Posts: 321	Re: DURG's Black 65 C10 You have one awesome truck man love it Posted via Mobile Device __________________ 1966 C10 short stepper KMHK

11-25-2012, 07:09 AM	#153
mark 66 Registered User Join Date: Jun 2012 Location: cleawater florida Posts: 246	Re: DURG's Black 65 C10 Sharp truck.I think Id have a hard time going in the house.I would just want to sit out there and appreciate how its coming together.NICE

11-25-2012, 07:55 PM	#154
Texas Pugh Registered User Join Date: Jul 2012 Location: Midlothian, Texas Posts: 72	Re: DURG's Black 65 C10 Truck is looking great and you are doing a good job partner.

11-25-2012, 08:23 PM	#155
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Thanks all for the comments. I have tracking numbers for my front 20" Coys rims to be here Friday. I want to get this thing on the ground and set the frame heights and take a look. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

11-25-2012, 08:28 PM	#156
Leadfoot Lambert Registered User Join Date: Jan 2011 Location: Saco, Maine Posts: 377	Re: DURG's Black 65 C10 I can't wait to see it on the ground probably almost as much as you! __________________ 65 Chevy short fleet 350 5 speed, soon to be LSX powered 65 F100 short fleet 91 Heritage softail 94 Fatboy 11 Softail Deluxe [wife's bike] 13 Streetglide http://www.youtube.com/watch?v=yMFMw...eature=mh_lolz

11-28-2012, 07:21 PM	#157
65shortbox Registered User Join Date: Oct 2008 Location: Los Angeles Posts: 39	Re: DURG's Black 65 C10 Great build! I have a 65 swb/bbw also. I REALLY like the portorbuild items and the static drop on your truck! I am currently working on an LS1/T56 conversion on my 67 camaro otherwise I'd tear the truck down and get the same suspension you have, very nice! I guess I'll have to wait and install those pieces when my 3 year old son enters high school, good father son project:-) BOTH of your classic vehicles look GREAT!

12-01-2012, 12:37 AM	#158
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 FINALLY have all my Coy's wheels mounted and on the truck. 22x9 and 20x8.5 I just put the fronts on tonight but have not checked/set frame heights yet. I got the bullet center caps with no Coy's emblems, just smooth and I will install them in the morning. They match the ones on my 62 Impala SS. This weekend I will adjust the coilovers to ride height so I can check out the stance. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

12-01-2012, 09:51 AM	#159
Leadfoot Lambert Registered User Join Date: Jan 2011 Location: Saco, Maine Posts: 377	Re: DURG's Black 65 C10 Looks Killer __________________ 65 Chevy short fleet 350 5 speed, soon to be LSX powered 65 F100 short fleet 91 Heritage softail 94 Fatboy 11 Softail Deluxe [wife's bike] 13 Streetglide http://www.youtube.com/watch?v=yMFMw...eature=mh_lolz

12-01-2012, 11:08 AM	#160
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: DURG's Black 65 C10 She's got the look. Gonna be a great pair __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-01-2012, 12:21 PM	#161
65shortbox Registered User Join Date: Oct 2008 Location: Los Angeles Posts: 39	Re: DURG's Black 65 C10 Wow that looks great! Congratulations! Please post pics once you adjust final ride height... Posted via Mobile Device

12-01-2012, 02:50 PM	#162
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 This is at 5-1/2" in the front and 6-1/2" in the rear as measured from the floor to underside of main frame rails directly below front and rear cab mounts. I have sent Nate my upper control arm and rear four link arm angles to get a recomendation. I also have been working on the rear bed frame some more gearing up for the wood install. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

12-01-2012, 03:59 PM	#163
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: DURG's Black 65 C10 Man, I'm in love with this truck. Super clean execution __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-01-2012, 04:32 PM	#164
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: DURG's Black 65 C10 Stance looks awesome! Great work Durg! I will follow up on your email first of the week! Posted via Mobile Device __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

12-01-2012, 08:32 PM	#167
classic66 Registered User Join Date: May 2011 Location: medford or Posts: 5	Re: DURG's Black 65 C10 durg your truck looks sweet I was wondewring what size tires you put on your 20's and 22's thanks

12-02-2012, 12:41 AM	#169
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: DURG's Black 65 C10 Thats Awesome.Nice work.What do you do for bump stomps or did I just not see them?Truck is looking great.Very nice thread.What drop are your Drop Spindles.My 64 chevy truck has been channeled 3.5 inches.I put 3. Droped Bell Spindels on and its too low at the A-Arms.



Register or Log In To remove these advertisements.

12-02-2012, 01:15 AM	#170
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: DURG's Black 65 C10 great job just just went through the whole thread you nailed it !! nice craftsmanship also!! __________________ CHEVY ONLY... Nothin Else !

12-02-2012, 04:35 PM	#173
Solo2002 Registered User Join Date: Aug 2012 Location: Bibb CO.Alabama Posts: 321	Re: DURG's Black 65 C10 that is just to cooli want mine like that now looks great you did a really good job __________________ 1966 C10 short stepper KMHK

12-02-2012, 06:24 PM	#174
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: DURG's Black 65 C10 Really following along on this.

12-02-2012, 07:05 PM	#175
65shortbox Registered User Join Date: Oct 2008 Location: Los Angeles Posts: 39	Re: DURG's Black 65 C10 You nailed that static stance! Curious how the ride quality will be compared to the bags on your Impala... Posted via Mobile Device

Register or Log In To remove these advertisements.