The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-17-2015, 06:40 AM   #1
snipes
Registered User
 
Join Date: Aug 2015
Location: Ossining
Posts: 10
Anyone use Autometer 5 inch Speedo in there 3100?

Was looking into options for a speedo in my 53 Rat truck project and came across the Autometer 4489 (5"). Looks like it would almost be a match size wise and also looks like I can wire her up to the 89 S10 Donor chassis/drivetrain.

http://www.summitracing.com/parts/atm-4489/overview/

Tried the search button but didn't find any results. Thanks for any help.
snipes is offline   Reply With Quote
Old 10-17-2015, 08:29 PM   #2
47 Fasttoys
Registered User
 
47 Fasttoys's Avatar
 
Join Date: Sep 2013
Location: Westminster, SC
Posts: 933
Re: Anyone use Autometer 5 inch Speedo in there 3100?

I'm running SpeedHut gauges in mine. They are also 5" so I made some sheet metal spacers. For now there just tacked in place but open up a lot of gauge options.
Rob

__________________
My '47 C.O.E build
47 Fasttoys is offline   Reply With Quote
Old 10-17-2015, 08:52 PM   #3
YukonXL04
Registered User
 
YukonXL04's Avatar
 
Join Date: Jun 2015
Location: Arlington, TX
Posts: 92
Re: Anyone use Autometer 5 inch Speedo in there 3100?

How did they look without the spacers? Why did you need a spacer?
YukonXL04 is offline   Reply With Quote
Old 10-17-2015, 11:18 PM   #4
whitedog76
Registered User
 
Join Date: Jan 2014
Location: Peoria, IL
Posts: 1,450
Re: Anyone use Autometer 5 inch Speedo in there 3100?

Just curious.

There's quite a few diret fit guages out there, why make spacers/weld the dash?

Chris
whitedog76 is offline   Reply With Quote
Old 10-17-2015, 11:26 PM   #5
YukonXL04
Registered User
 
YukonXL04's Avatar
 
Join Date: Jun 2015
Location: Arlington, TX
Posts: 92
Re: Anyone use Autometer 5 inch Speedo in there 3100?

Quote:
Originally Posted by whitedog76 View Post
Just curious.

There's quite a few diret fit guages out there, why make spacers/weld the dash?

Chris
The only direct fit I saw was around $800 or so for the pair. Know of any cheaper options?
YukonXL04 is offline   Reply With Quote
Old 10-18-2015, 11:35 AM   #6
xaircav
Registered User
 
xaircav's Avatar
 
Join Date: Aug 2006
Location: Wheat Ridge, Colo.
Posts: 300
Re: Anyone use Autometer 5 inch Speedo in there 3100?

I run Made in USA Omega Kustom 5" tan face gauges from Speedway Motors. Speedo is programable and they are a direct fit for AD trucks.
xaircav is offline   Reply With Quote
Old 10-18-2015, 04:40 PM   #7
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,013
Re: Anyone use Autometer 5 inch Speedo in there 3100?

I used a gauge like that by cutting the back and internals out of a stock gauge set then slipped the new one inside the housing from the front. That set in the dash opening and worked well.
Advanced Design is offline   Reply With Quote
Old 10-19-2015, 06:15 PM   #8
47 Fasttoys
Registered User
 
47 Fasttoys's Avatar
 
Join Date: Sep 2013
Location: Westminster, SC
Posts: 933
Re: Anyone use Autometer 5 inch Speedo in there 3100?

In my case I went with the speedhut because 1. They are custom made per order which gives you many face options, in my case they are blue at night. 2. The speedo is GPS controlled which makes hook up a breeze and does not depend on input from the trans. 3. I was able to use my factory fuel sender unit. 4. They are very programmable with multiple alarm set points. 5. I've had issues with the cheaper brands with both customer support and long term wear issues. My Dolphin gauges look like crap after 2 years. Yes, I did need to modify the dash and that still needs a bit of work. At $650 they are not cheep, many other options out are good but in most cases you get what you pay for.
Rob
__________________
My '47 C.O.E build
47 Fasttoys is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com